newbie on linux(wgere do i find drivers?)


Recommended Posts

I'll run the live cd but, for example, if i go on amd.ati.whatever.com -->driver site, they do have some drivers out there but they don't have for 4850(they stop at 3XXX series), and another question, does ubuntu support RAID function?(my mobo site doesn't have ANY drivers for LINUX< and that is a big shame if you ask me...>).

You are thinking the Windows way, about going to each individual manufacturer's site.

In Linux, generally, it is in there and working. A few drivers are closed-source, or restrictively licensed and can't be included. However, common ones like nVidia or ATI drivers are detected, and you will be prompted to download if you choose to use a "restricted" (non-GPL-compatible) driver module.

Yes, RAID is supported. True hardware RAID is transparent to the OS, working at the hardware level and all. ;) However, many Windows RAID setups are "fake raid" or software RAID, and may not be detected or usable by Linux. Even if you don't have a true hardware RAID, Linux can do its own software RAID, using dmraid. I have played with it once to try it out. It works as advertised, nothing fancy. So even if your motherboard doesn't advertise "Linux compatible", stuff should still work just fine.

again, thank you!.....ah...i have fakeraid:), now i'm thinking to re-install windows and remove the so called RAID.....i hoped that with RAID0 i will gain some speed but if it is a fake one i'm not so sure that i did gain some speed.

Edited by CipRyaN

A software RAID does not require changes in the BIOS, a software RAID is set up using the OS (Windows, Linux, what have you) and chews up a lot of CPU power.

If you have the ability to do a hardware RAID instead, I recommend it - it will be faster and you will have more free system resources.

Software RAID is fine. I set it up for testing on a 400 (or maybe a 750-ish) megahertz computer. It didn't drag down the CPU any amount I could notice, but I admittedly did no benchmarking.

I would think that you would only see impact if doing heavy disk I/O while also having high CPU usage for number crunching. It doesn't take long to do a quick RAID5 checksum, I would imagine. And if you use RAID0, there really is no redundancy or checksumming going on.

I don't see a noticeable negative impact from software RAID.

wait a minute:). in my mobo manual says that i can make "Software raid" using intel matrix storage bla bla software, or i can go with the hardware raid, BUT from this uri i found out that my mobo maker is telling lies because the hardware RAID isnt't a real one ...(my mobo is: ASROCK P45R2000). So, now i'm asking, again...Should i stay with this "Hardware RAID offered by my mobo?

I have googled your motherboard, and google led me to this site:

http://www.asrock.com/mb/manual.asp?Model=P45R2000-WiFi

So I checked out the RAID information presented there. It seems your board uses an Intel ICH10R chipset, which is apparently well-supported. Good news.

The bad news is that from reading the PDF documentation I found on the first link, it seems that the motherboard works in conjunction with an "Intel® Matrix Storage Manager software" that must be installed.

That tells me the motherboard says it supports RAID, but in reality, it is software doing the work.

What is the right answer for you? I don't know - I don't have that motherboard. Try it one way, and see if it works. If not, go the other route.

To add to markjensen's comment above regarding the Intel Matrix Storage Manager, the following link might be handy:

http://www.intel.com/support/chipsets/imsm/sb/CS-020663.htm

By following the links there, it appears that dmraid should support this software RAID configuration.

http://www.redhat.com/archives/fedora-list...y/msg03335.html

you guys are awesome! i'm going LINUX pretty soon!

the intel matrix blabla software it's not a must. you can install it or not, the hdd with raid will work(but with that software you can make virtual raid's).

edit: it seems like the link you offered me for my chipset is not really my chipset it's an Intel? ICH7R RAID Technology, and my chipset is Intel? ICH10R

Edited by CipRyaN

Linux is great. It's all we use here at my company, with a few minor exceptions where there is proprietary software that *must* use windows (blah).

edit: it seems like the link you offered me for my chipset is not really my chipset it's an Intel? ICH7R RAID Technology, and my chipset is Intel? ICH10R

The link provided comes directly off of the Intel Matrix Storage Manager Q&A page.

http://www.intel.com/support/chipsets/imsm/sb/CS-020785.htm

Or another option if you don't want to go with the software raid is to purchase a hardware raid controller. Some options:

http://www.newegg.com/Product/ProductList....aid+-controller

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Honestly... 4 wasn't fun, 5 had unlikeable, annoying, or dull characters... Yeah, to me the magic died with San Andreas.
    • Flameshot 14.0 Final by Razvan Serea Flameshot is a free and open-source, cross-platform tool to take screenshots with many built-in features to save you time. Using Flameshot is as simple as launching, dragging the selection box to cover the area you want to capture, making annotations as needed in on-screen and saving the shot to your computer, all with a very simple and straightforward interface. Flameshot allows users to simply upload their screenshots directly to the cloud in order to easily share it with others. You can upload your image directly to Imgur with a single click and share the URL with others. In-app screenshot editing - You can choose to add an arrow mark, highlight text, blur a section (blur or pixelate an area), add a text, draw something, add a rectangular/circular shaped border, add an incrementing counter number, and add a solid color box with Flameshot's built-in editing tools. Command-line interface (CLI) - Flameshot has several commands you can use in the terminal without launching the GUI via a command line interface. The command line interface lets you script Flameshot and use it as the subject of key binds. Flameshot 14.0 release notes: This release brings major improvements to multi-monitor support, fractional scaling support, new capture workflows, and a long list of bug fixes across all platforms. Changelog: New Multi-Monitor Capture Workflow New monitor selection screen before capture for better multi-monitor and mixed-scaling support. Option to auto-capture the monitor under the cursor (X11 & Windows). Tray menu can directly select a monitor. Linux Improvements XDG Desktop Portal is now the primary screenshot method. Added legacy X11 fallback option for minimal window managers. New D-Bus capture API for scripting and automation. Windows Enhancements Global screenshot hotkeys now supported (not limited to Print Screen). New portable mode stores settings next to the executable. Clipboard now always uses PNG format for better compatibility. CLI & Platform Updates Redesigned flameshot screen command with per-monitor capture support. Added native Nix Flake support. More compact launcher UI and improved update notifications. Major Fixes Multiple Wayland stability fixes, including KDE Plasma crash fixes. Clipboard compatibility improvements for GNOME, Wayland, X11, Windows, and macOS. Fixed D-Bus hangs, capture crashes, and HiDPI region issues. Other Changes Dropped Ubuntu 20.04 (Focal) support. Updated translations and build infrastructure. Intel macOS builds are no longer provided. [full release notes] Download: Flameshot 14.0 | 18.1 MB (Open Source) Download: Flameshot Portable | 53.0 MB Links: Flameshot Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      579
    2. 2
      +Edouard
      183
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      73
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!