Recommended Posts

I have a WiFi modem on my desktop, it was simple to setup, I just went to 192.168.1.1, then changed the settings and set the password(the 10 letter one). I opened my Laptop, switched on wifi, it found my network, and I put my password, and had it all running.

My question is, that how to I create a lan-like wireless network on this connection ie be able to share files, printers etc.

Link to comment
https://www.neowin.net/forum/topic/651883-how-to-create-a-wifi-home-network/
Share on other sites

And depending on your wireless ROUTER. You might have to disable AP or Client isolation. Some wireless routers by default will block wireless clients from talking to each other for security reasons.

give the make and model number of what your calling a "modem" and we can check if has this type of feature, and where to turn it off.

I can't really see that the other computer is connected to mine and is accessing the internet on my computer. It's like the Modem is a totally different unit, which is not associated to my PC in any other way than the Ethernet wire from it to my PC.

And what IP address does your PC have? And what IP address does your wirelesss laptop/pc have?

If your device is natting.. then they would get some 10.x.x.x or 192.168.x.x or 172.16-31.x.x address.

Can they ping each other by IP? Do you have firewalls running in the PC or laptop that allow for icmp? If your behind a NAT, ie you have a private address -- then turn off all firewall software for testing.

And how did you find out what your PC IP is -- and why did you say its internal address? It only has 1 interface does it not?

As stated IPconfig will show you the IP addresses of your interface -- what has me confused is how you know what your desktop one is - but can not figure out your wireless one?

Can you ping your desktop from your laptop?

I'm a bit lost here, so here's what I know:

From IP config, my IP address is 192.168.1.16, Default gateway is 192.168.1.1

.

I can successfully ping both the IPs from my laptop.

Again, I'm telling you, that my laptop is able to access internet through the WiFi modem connected to my PC.

All I had to do is, setup the password and enable WiFi by entering 192.168.1.1 in my browser, and configuring accordingly.

So you PC is .16 and your router is .1 and your laptop is?

If you can ping your PC from your laptop -- your ON the same network and ready to go.. Enable File and Print sharing your good.

My laptop's ip is .2, and I can ping it successfully. Where do I enable File and Printer sharing? Is it in the network connnections->properties?

Keeping things simple...

You can run the "Network Setup Wizard" from the Communications..

Otherwise create a folder in a location.. Right click it -> Sharing and Security and put a tick in "Share this folder on the network"

I'm sorry, I dont really know this stuff.

So you're just shouting randoms? :blink:

If you suspect your laptop is using your computer's connection via ICS then just power down your machine and see if it can still access the net. Simple but yet an effective test.. :alien:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Linux 7.1 arrives with an NTFS overhaul and major hardware performance boosts by Paul Hill The founder of the Linux kernel has just announced the availability of Linux 7.1. This is a stable version of the kernel that will now be tested by various Linux distributions before it is shipped to users through update managers. Some users, like those on Debian, for example, might not get it for a long time, if at all, while Fedora users can expect it in the near future. With Linux 7.1 out on time, the merge window for Linux 7.2 is now open, giving contributors the opportunity to send in major new features that have been waiting for the last two months. Torvalds warned that he is currently travelling and will be in another timezone, so timing for the merge window may be irregular due to timezone differences and limited internet access. Torvalds said that he has already fetched early pull requests to allow him to do some offline work, but the travel could still cause disruption. Right now, he is not planning to extend the release, but did consider it. He said he might later regret not extending, though. In terms of this last week of development for Linux 7.1, Torvalds said there were no major or alarming changes. This week consisted mostly of smaller driver updates to GPU, networking, and sound, networking fixes, trace tooling fixes, and misc minor fixes. The shortlog this week lists fixes for driver bugs, memory leaks, I/O and USB fixes, networking and RDMA fixes, DRM/graphics fixes, and tooling and verification improvements. Specific fixes include USB series heap-overflow and buffer overflow fixes, and multiple use-after-free, memory-leak, and refcount corrections across subsystems such as i2c, zram, gpio, and net. There are fixes for graphics drivers, including amdgpu, i915, and virtio, as well as hypervisor and virtualization tweaks affecting mshv, vmbus, and hyperv. According to Phoronix, anyone running Linux 7.1 should look out for the new NTFS driver, Intel FRED for improved performance on Panther Lake and future CPUs, faster graphics with Intel Arc Battlemage, and improvements for older AMD Radeon GPUs. If you are running Linux on your computer and everything is fine, then you don’t need to worry about updating to Linux 7.1 as a priority; just wait for it to be pushed to you. If you have tried Linux on hardware but it didn’t work properly, trying again with a distro that uses Linux 7.1 could cause Linux to work on your machine, thanks to the new hardware support.
    • you can also do this with this tool: PowerSettingsExplorer made by mbk1969 at 3dguru forum.. I found it by accident researching on modern standby and annoying quirks of it in 2022
    • AB Download Manager 1.9.1 by Razvan Serea AB Download Manager is an open-source, feature-rich download manager designed to accelerate downloads, organize files efficiently, and provide seamless control over downloads. With support for multiple connections, resume capability, and an intuitive interface, it enhances the downloading experience for users seeking speed and reliability. The software integrates with various browsers, enabling quick link grabbing and batch downloading. It supports HTTP, HTTPS, and FTP protocols, ensuring broad compatibility with different file sources. Users can schedule downloads, set speed limits, and categorize files automatically for better organization. AB Download Manager is lightweight yet powerful, making it a great alternative to proprietary download managers. Its open-source nature allows developers to contribute, customize, and improve the software as needed. Whether you're downloading large files, managing multiple downloads at once, or seeking an ad-free experience, this tool offers a practical and efficient solution. Key features of AB Download Manager: Multi-Connection Support – Accelerates downloads by splitting files into multiple segments. Resume Capability – Allows paused or interrupted downloads to be resumed without starting over. Batch Downloading – Supports downloading multiple files at once for improved efficiency. Browser Integration – Captures download links directly from browsers for seamless operation. HTTP, HTTPS, and FTP Support – Ensures compatibility with a wide range of file sources. Download Scheduling – Enables users to automate downloads at specific times. Speed Limiting – Lets users control bandwidth usage for optimized performance. File Categorization – Automatically organizes downloaded files into designated folders. User-Friendly Interface – Simple and intuitive design for easy navigation. Cross-Platform Compatibility – Works on multiple operating systems. Ad-Free Experience – No intrusive ads or tracking for a clean user experience. AB Download Manager 1.9.1 changelog: Added An option to customize notification sounds (#1259) Fixed Ongoing notification was laggy on Samsung One UI devices (#1269) Improved Updated Translations Minor UI/UX improvements Download: AB Download Manager 1.9.1 | Portable | ~80.0 MB (Open Source) Download: ARM64 | Portable ARM64 | Android Links: AB Download Manager Website | Github Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • watching him because of the Mr Klinton cat
    • yup dude, ADS on this website are terrible
  • Recent Achievements

    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      +Edouard
      196
    3. 3
      PsYcHoKiLLa
      140
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!