Recommended Posts

I have a WiFi modem on my desktop, it was simple to setup, I just went to 192.168.1.1, then changed the settings and set the password(the 10 letter one). I opened my Laptop, switched on wifi, it found my network, and I put my password, and had it all running.

My question is, that how to I create a lan-like wireless network on this connection ie be able to share files, printers etc.

Link to comment
https://www.neowin.net/forum/topic/651883-how-to-create-a-wifi-home-network/
Share on other sites

And depending on your wireless ROUTER. You might have to disable AP or Client isolation. Some wireless routers by default will block wireless clients from talking to each other for security reasons.

give the make and model number of what your calling a "modem" and we can check if has this type of feature, and where to turn it off.

I can't really see that the other computer is connected to mine and is accessing the internet on my computer. It's like the Modem is a totally different unit, which is not associated to my PC in any other way than the Ethernet wire from it to my PC.

And what IP address does your PC have? And what IP address does your wirelesss laptop/pc have?

If your device is natting.. then they would get some 10.x.x.x or 192.168.x.x or 172.16-31.x.x address.

Can they ping each other by IP? Do you have firewalls running in the PC or laptop that allow for icmp? If your behind a NAT, ie you have a private address -- then turn off all firewall software for testing.

And how did you find out what your PC IP is -- and why did you say its internal address? It only has 1 interface does it not?

As stated IPconfig will show you the IP addresses of your interface -- what has me confused is how you know what your desktop one is - but can not figure out your wireless one?

Can you ping your desktop from your laptop?

I'm a bit lost here, so here's what I know:

From IP config, my IP address is 192.168.1.16, Default gateway is 192.168.1.1

.

I can successfully ping both the IPs from my laptop.

Again, I'm telling you, that my laptop is able to access internet through the WiFi modem connected to my PC.

All I had to do is, setup the password and enable WiFi by entering 192.168.1.1 in my browser, and configuring accordingly.

So you PC is .16 and your router is .1 and your laptop is?

If you can ping your PC from your laptop -- your ON the same network and ready to go.. Enable File and Print sharing your good.

My laptop's ip is .2, and I can ping it successfully. Where do I enable File and Printer sharing? Is it in the network connnections->properties?

Keeping things simple...

You can run the "Network Setup Wizard" from the Communications..

Otherwise create a folder in a location.. Right click it -> Sharing and Security and put a tick in "Share this folder on the network"

I'm sorry, I dont really know this stuff.

So you're just shouting randoms? :blink:

If you suspect your laptop is using your computer's connection via ICS then just power down your machine and see if it can still access the net. Simple but yet an effective test.. :alien:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Sandboxie Plus 1.17.8 / Classic 5.72.8 by Razvan Serea Run programs in a sandbox to prevent malware from making permanent changes to your PC. Sandboxie allows you to run your browser, or any other program, so that all changes that result from the usage are kept in a sandbox environment, which can then be deleted later. Sandboxie is a sandbox-based isolation software for 32- and 64-bit Windows NT-based operating systems. It is being developed by David Xanatos since it became open source, before that it was developed by Sophos (which acquired it from Invincea, which acquired it earlier from the original author Ronen Tzur). It creates a sandbox-like isolated operating environment in which applications can be run or installed without permanently modifying the local or mapped drive. An isolated virtual environment allows controlled testing of untrusted programs and web surfing. Sandboxie is available in two flavors Plus and Classic. Both have the same core components, this means they have the same level of security and compatibility. What's different is the user interface the Plus build has a modern Qt based UI which supports all new features that have been added since the project went open source. The Classic build has the old no longer developed MFC based UI, hence it lacks support for modern features, these features can however still be used when manually configured in the Sandboxie.ini. Sandboxie Plus 1.17.8 / Classic 5.72.8 release notes: Added added DisableCustomTitleOpt=[process,][y|n] to allow [#] sandboxie title markers on custom-titlebar windows (Delphi VCL, Qt, Electron) that were previously skipped to prevent DWM repaint CPU loops #5387 Changed updated bundled ImDisk driver to 3.0.2 #5419 Fixed fix Suppress logs for expected non-user SIDs #5422 SbieSvc.exe: SBIE2218/2219 error when run program as administrator #5417 fixed explorer.exe crashes in Application Compartment when Huorong Security is installed #5423 Download: Sandboxie Plus (64-bit) | 23.5 MB (Open Source) Download: Sandboxie Classic (64-bit) | 3.0 MB Links: Sandboxie Website | GitHub | ARM64 | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hello, Christian Maas' XVI32 is a nice (and very small) hex editor. Speaking of hex editors, many years ago a colleague and I who both worked at Tribal Voice managed to edit a copy of the company's PowWow instant messaging client to make it behave better now that all of its lookup servers and other server-side tech was gone.  The program didn't support NAT (RFC-3022 was introduced in January 2001, the same time Tribal Voice was shuttered), but it still worked okay if you manually set up port-forwarding on your router.  The server at http://powwow.jazy.net/ hosts a copy (usual warnings about downloading and running untrusted code from random internet servers apply). I occasionally use some tools like Funduc Software's Search and Replace and Application Mover when I need to make mass-edits to text-based files or move programs with a hard-coded installation directories, respectively.  When I need to figure out the exact LCD panel inside of a laptop, EnTech Taiwan's Monitor Asset Manager is my go-to tool for that purpose. JD Design's website (now hosted on github.io) has a number of interesting freeware and shareware utilities.  I used to use their TouchPro utility to set the file timestamps on software I was mastering to match its version number (e.g., version 3.00 of a program had all of its files dates set to 3:00AM, and so forth). Karenware has a number of interesting freeware utilities, too. Regards, Aryeh Goretsky  
    • I still use HexChat! Not really as ancient as the 1994 AutoCAD above my post, but I have never found anything better to replace it. Yes we still operate an IRC server https://www.neowin.net/irc/ 😛 
    • At work we still have a couple of people that use a version of AutoCAD LT purchased in 1994. This predates Windows 95 and works fine on versions of Windows up to XP. Its long since run in an locked down isolated XP VM, accessible via RDP. I did install LibreCAD for them, however they said it was just too different to get to grips with. In all fairness one of them is now 75 and the other is almost 60.
    • On my music making (non internet) PC Sony Acid Pro 7.0 Adobe Audition 2015 Korg Legacy Collection Windows 7 SP1
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!