• 0

[C++] How to jump a specific line when reading a file?


Question

11 answers to this question

Recommended Posts

  • 0

There's no way to go to a specific line without reading up to that point, since each line in the file you are reading probably has a different length. You could try read the entire file while looking for newlines and for each newline you find, add the position to an array. Then you can seek to that position by using the line number as the array's index and the value as the position in the file.

  • 0
  Banjo said:
There's no way to go to a specific line without reading up to that point, since each line in the file you are reading probably has a different length. You could try read the entire file while looking for newlines and for each newline you find, add the position to an array. Then you can seek to that position by using the line number as the array's index and the value as the position in the file.

That sounds incredibly taxing, though :/ Especially if it's a really big file that you need to go through multiple times. Or am I reading it wrong?

  • 0

You would only need to go through it once to store the line indexes in the array. After that, everything is fast since you just look up two values in the array - the start of the line you want and the start of the next line (so you know how much to read)

If you are in control of what the file contains, an even easier method is to just pad each line to the same length and use multiplication to find out where the line starts

  • 0
  The Tjalian said:
That sounds incredibly taxing, though :/ Especially if it's a really big file that you need to go through multiple times. Or am I reading it wrong?

Well how else would you do it? Unless the file has lines of a fixed length, or has its own index, somebody needs to scan through it to find the line breaks. Whether it's a library / API or your own code, it needs to be done.

If you just need to scan to a certain line number once and make a single pass through the file, you don't need to save off the indices into an array as suggested. That's an optimization that you can do if you're going to need to seek to different lines within the file several times (and possibly out-of-order). Likely you'll want to make this part of your "loading" process for the file as users are accustomed to this behavior.

  • 0

by using the seekg method I posted earlier, the user can set the seekg to the 0th position from ios::end, access tellg to get the length of the file, then set seekg to the position he wanted knowing his upper and lower limits... very simple an efficient.

  • 0

how about using getline() ?

Here you can find this code:

ifstream fin("data.txt");
  string s;
  while( getline(fin,s) ) {
	cout << "Read from file: " << s << endl;
  }

which is reading string line by line. Just store the s.size(); (string's length) to a variable, and sum it up for each loop. You may set the loop limit as the argument pass, and return the sum for seekg();.

If I got a chance, I'll put the code.

Or maybe just use tellg(); after each loop for loop limit (line number). return the last tellg(); value for seekg();

This may not work. I just type it out here:

long goto_file_line(int iLine_Number) {
	ifstream fin("data.txt");
	string s;
	long length;

	fin.seekg (0, ios::beg); // go to the first line

	for (int i=0; i<=iLine_Number; i++) // loop 'till the desired line
		getline(fin, s);

	length = fin.tellg(); // tell the first position at the line, maybe +1 or -1. try if it's not working
	return length;
}

or add seekg(); for void, so you can continue your i/o after the function.

void goto_file_line(int iLine_Number) {
	ifstream fin("data.txt");
	string s;
	long length;

	fin.seekg (0, ios::beg); // go to the first line

	for (int i=0; i<=iLine_Number; i++) // loop 'till the desired line
		getline(fin, s);

	length = fin.tellg(); // tell the first position at the line, maybe +1 or -1. try if it's not working
	fin.seekg(length);
}

Edited by chu121su12
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This site is just old men ranting at clouds. Neowin knows its audience.
    • That's nice and all. but I generally just stick with Lutris paired with 'ge-proton' (which gets updated fairly often (June 1st was last update) as the 'ge-proton' entry in Lutris uses stuff here... https://github.com/GloriousEggroll/proton-ge-custom/releases ) and the like to play my games. p.s. if a person wants to stick with a specific version from that link you can download a specific version and extract it to "~/.local/share/lutris/runners/proton/". then select it in Lutris options on game shortcut is the basic idea. because by default the standard 'ge-proton' entry will automatically get updated which can occasionally cause issues even though it's usually fine. but manually setting it on a specific version will prevent the standard updates on 'ge-proton' from messing with it on a particular game you may have issues with if that gets updated etc. one good example of the 'ge-proton' updates messing with a game in particular is the offline version of RDR2 1491.50 as I setup a specific version there and after removing the 'vulkan-1 (native)' entry in 'Wine configuration' on 'RDR2.exe' entry (if you don't remove this the game won't start up) is when the 'ge-proton' updates, it will restore that 'vulkan-1 (native)' entry and prevent the game from working. you can always remove the entry on the RDR2.exe in Wine configuration specifically after updates, but doing that everytime that updates will get old quickly. hence, keeping it on a specific GE Proton version stops me from having to mess with it as then you just adjust it once and you are done with it. also, when using 'bat' files to start a game (like Hitman: WoA for example using Peacock etc) I had some issues with GE Proton after '9-27', so I got the game locked to '9-27' (April 1st) instead of the newer ones (10-1 etc).
    • Sam Altman says AI could soon help with discovering new knowledge by Hamid Ganji OpenAI is currently at the forefront of developing powerful AI models, while its ChatGPT product is rewriting our traditional way of looking for new information. The company's CEO, Sam Altman, now says AI could even help humans discover new knowledge. He also described AI agents as junior employees. Speaking at the Snowflake Summit 2025, Altman boasted that AI agents can act like junior employees, saying, "You hear people that talk about their job now is to assign work to a bunch of agents, look at the quality, figure out how it fits together, give feedback, and it sounds a lot like how they work with a team of still relatively junior employees." OpenAI CEO also added AI agents could help humans discover new knowledge in "limited cases" or "figure out solutions to business problems that are kind of very non-trivial." While the use of AI for scientific discovery is still viewed with skepticism, the technology has proven its capabilities for new discoveries in several cases. For example, the Microsoft Discovery platform, designed for accelerating scientific research and development by AI agents, was recently able to discover a new chemical for cooling data centers in just 200 hours, a process that normally takes years to research and complete by humans. AI firms are also shifting their focus toward developing AI agents capable of performing various tasks. OpenAI recently unveiled Codex, which contains AI agents for helping programmers write and debug code. According to Altman, OpenAI engineers are already using Codex. As AI agents become more intelligent, more employees should be concerned about losing their jobs. Companies have already started replacing some specific roles with AI. For example, Duolingo has replaced its contract workers with AI, while Shopify managers need to provide reasons why AI cannot handle a job before seeking approval for new hires. Via: Business Insider
    • I personally don't think there will be many survivors past the ESU date, but I can be wrong🙂 >Firefox still supports Windows 7 (until the end of August), which will be just over 16 years since release. Well, yes, but it's an ESR version, which kind of doesn't count as fresh for me. So the last mainline version of Firefox with W7 support was 115, which was released in 2023, exactly around the W7 ESU expiration.
    • Hey, sounds like it’s definitely time for an upgrade. The R7000 had an excellent run! If you want lots of wired ports and future-proofing, the Asus RT-BE88U is a killer choice. It’s got 2x 10GbE, 4x 2.5GbE, and handles WiFi 7 like a champ. Super fast, stable, and the ASUS firmware is solid with loads of features. The TP-Link BE900 is also great, sleek design, strong performance, and a combo 10G port (RJ45/SFP+), but it has fewer wired ports than the Asus. Netgear RS700S is powerful too, but the firmware isn’t as flexible and only has one 10G port. It might feel familiar from your R7000. If wired ports are a big deal, maybe adding a 2.5G or 10G switch later gives you more options. My vote is RT-BE88U all the way.
  • Recent Achievements

    • First Post
      nothin earned a badge
      First Post
    • Enthusiast
      Epaminombas went up a rank
      Enthusiast
    • Posting Machine
      Fiza Ali earned a badge
      Posting Machine
    • One Year In
      WaynesWorld earned a badge
      One Year In
    • First Post
      chriskinney317 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      186
    2. 2
      ATLien_0
      130
    3. 3
      snowy owl
      129
    4. 4
      Xenon
      119
    5. 5
      +FloatingFatMan
      97
  • Tell a friend

    Love Neowin? Tell a friend!