Thermalright TRUE Black or OCZ Vendetta 2 ?


Recommended Posts

Hello there Guys, I was just about to place my order for the Thermalright True Black Edition, but after reading around, the OCZ Vendetta 2 looks to be a pretty good cooler too.

I am trying to push my QX9770 Close to 4GHz or Near on Air Cooling.

So the question is, Which one do I go with: Thermalright TRUE Black or OCZ Vendetta 2?

Your Thoughst?

Xigmatek S1283? Noctua NH-U12P? Sunbeam Core Contact Freezer?

IMO those are all better choices than the TRUE Black. Xigmatek would probably be my top choice, and if you add maybe a Noctua NF-P12 on it, then it'll be even better.

Xigmatek S1283? Noctua NH-U12P? Sunbeam Core Contact Freezer?

IMO those are all better choices than the TRUE Black. Xigmatek would probably be my top choice, and if you add maybe a Noctua NF-P12 on it, then it'll be even better.

Those would be the top two choices. Make sure to order the back plate if you order the Xigmatek.

So nobody wants to recommend the Thermalright? Any reasons? Remember I am trying to push my QX9770 to either 4GHz or near. So I need the BEST Air Cooling Solution.

Your Thoughts?

Like Shift and I said before, the Xigamatek and the NH-U12P have proven themselves again and again in reviews. If you want the Thermalright, nobody is stopping you. I don't know how much convincing you need. :p

Hello there guys, I didn?t wanted to start another thread about my question, so here it is. I am gona go with Thermalright TRUE Black and with two fans to keeps it cool. I know a lot of you guys told me to get the older version and I have that version. But I have a problem with that version. The problem is that when I installed the heatsink with fan, the heatsink wasn?t really tight. I use the clamp and I screwed all the screws, but still the heatsink was moving around on the processor. I didn?t feel safe. So if someone had this problem, please tell me what I am doing wrong.

And also can you guys recommend me good fans for my Thermalright TRUE Black. And Should I go with One or Two Fans? Also noise is no problem with me. As long as my Processor is cooled off really Good!

Also Your Thoughts on Thermalright IFX-14 Heatsink? Who's Better TRUE Black or IFX-14?

Your Thoughts?

Don't know what you're doing wrong exactly as I can't quite picture what you're describing, but if you went back through the instructions and made sure everything is in the correct place, then it's simply a matter of tightening the heatsink down.

With regards to fans, I'm going to recommend some Deltas. :D Okay okay, Scythe S-Flex's or San Ace 1011's.

Most people will agree that IFX-14 ≈ TRUE.

Edited by gwai lo

If the reason you are getting the TRUE Black is because your first TRUE was "loose" then you'll encounter the same problem again, they use the same mounting system.

Also Your Thoughts on Thermalright IFX-14 Heatsink? Who's Better TRUE Black or IFX-14?

I'd say TRUE Black, but again; I must reiterate that the TRUE is not the best choice in this situation.

http://www.frostytech.com/top5heatsinks.cfm

Top 3 are as follows:

1) Sunbeam Core Contact Freezer

2) Xigmatek S1283

3) Themalright Ultra 120

http://www.hardwarecanucks.com/forum/hardw...r-review-8.html

Review of the TRUE Black, outperformed by the Noctua NH-U12P, Xigmatek S1283 and OCZ Vendetta 2

http://www.hardwarecanucks.com/forum/hardw...-review-10.html

That, in addition to the Xigmatek S1283 and OCZ Vendetta 2 having WAY better value is why I would choose those two.

But to answer your question, I would say that 2 fans is not worth having the extra noise on your heatsink, one would be enough.

And for choice of fans, I would go with a Noctua NF-P12. Those fans have good static pressure, so they move air really well through the fins without having to spin at high RPM.

Thermalright's products are the king, that's for sure. However, most people tend to also factor price into their purchases...which is what takes down the TRUE.

Or if you get one with a FUBAR'd base like he did. It is not an uncommon problem with TRUEs. Let's see how the Black one does, maybe they fixed the base on it.

Fans:

Scythe, Noctua, Panalfo, Nexus, Zalman, Silverstone, Xigmatek, Evercool, Arctic Cooling, Yate Loon, Cooler Master, Antec...

Basically, look for fans that are not Sleeve. Sleeve is the cheap alternative, hydro-magneto-double-whatever-bearing are the good ones.

I just got the TRUE black about a month ago and I can say it is still a little loose, but using the "washer mod" pretty much alleviated the problem. For reference, I use 2 Scythe S-FLEX SFF21F (1600RPM) fans and they are VERY quiet.

Perhaps you can try the washer mod with your current TRUE and see if it helps before buying any other cooler.

Another vote for Xigmatek, ThermalRight is over-priced and they have been a little incosistent in manufacturing quality in my experience (concave bases on a couple units I have tried).

I think I read it somewhere that they deliberately didn't make it flat, but it could just be one of their excuses :p

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I'm still on Windows 10 22H2 because I didn't want to deal with all the issues in Windows 11, so I waited almost a week before installing the latest Patch Tuesday update (KB5094127), I went ahead and did it, and it was a huge mistake—ever since then, my File Explorer has seen a performance drop of about 30% when transferring large files... Once again, Microsoft has outdone itself! This update cannot be uninstalled, either through the Control Panel (via Settings) or by accessing Advanced Startup Options. The only possible alternative would be to use system restore points, but I’d have to reinstall all app and driver updates (and there’s no guarantee it would work). Or there’s the “nuclear option” of a in-place repair without losing files or apps, but even then, all my customizations would be lost! Microsoft just can’t help but mess everything up! Way to go, Microsoft! But I still don’t want your c****y Windows 11!
    • Microsoft: Windows 11 could finally solve a major issue across AMD, Nvidia, and Intel GPUs by Sayan Sen While Microsoft has been trying to improve it, Windows 11 is definitely not flawless, as even today some issues are taking a year to publicly acknowledge. However, one area of trouble that may finally see much better results soon is graphics driver crashes. Work on graphics driver timeouts, also called Timeout and Detection Recovery (TDR), is not new as the latest WDDM 3.2 also has specific improvements regarding it. Windows Display Driver Model (WDDM) version 3.2 is supported on Windows 11 24H2 and 25H2. However, with the upcoming version 26H2, TDR crash diagnosis could go to the next level as Microsoft is introducing a new DirectX 12 API feature called "DirectX Dump Files". Similar to how system memory dump files work when a system crashes or freezes or encounters any such major issue, DirectX Dump Files (DDF) will essentially record a snapshot of the GPU execution right at the moment a graphics-related crash or hang or freeze occurs, so that developers can better understand and diagnoze these TDR and timeout detection errors. The dump will be available as a .dxdmp file for analysis and it will be a comprehensive dump file generated with detailed insights about the hardware, drivers, Windows, as well as the affected application. This should be another welcome change in this department. Earlier at GDC 2026, when the technology was first debuted, Microsoft had shared more details regarding it. The company had explained how DDF is designed to gather data from every layer of the graphics stack into a single file, eliminating the need for developers to manually correlate logs from multiple tools. As mentioned above, the dump can contain a lot of useful details like GPU hardware state information such as register values, shader program counters, page fault virtual addresses, shader memory data, and command buffers. Alongside that, it also captures DirectX runtime and kernel information, including D3D objects, pipeline state objects, device error data, adapter details, and CPU call stacks. Microsoft says the feature has been built around two primary use cases: retail device removals and local device removals. The former allows developers to collect crash information from end users' systems in the field, while the latter helps QA teams and developers investigate issues on test machines. Developers will also be able to include up to 2 MB of custom application data through new D3D12 APIs, providing additional context for troubleshooting. In addition, Microsoft is introducing three dump collection modes ranging from zero-overhead capture, which has no runtime performance impact on supported hardware, to higher-detail modes that collect more vendor-specific debugging data. On compatible Tier 2 hardware, zero-overhead dumps will be enabled by default, meaning developers may begin receiving useful crash diagnostics without making any code changes. The table below explains the three tiers: Tier Description NO_OVERHEAD Enables crash capture with no runtime cost and is suitable for broad deployment MEDIUM_OVERHEAD Provides a balance, capturing additional diagnostic data with moderate impact HIGH_OVERHEAD Collects the most detailed GPU and driver state available, enabling deeper investigation at the cost of higher runtime overhead In terms of availability, the company expects broader release to be around the fall of 2026, which should be right around the time when Windows 11 version 26H2 lands. Right now, DirectX Dump Files are available as a preview and currently, only AMD has the compatible AgilitySDK Developer Preview driver version 26.10.07.02. You can find the official announcement post here on Microsoft's website.
    • And with SO much better perf than the laggy mess that is Files.
    • BrowserOS 0.46.0 by Razvan Serea BrowserOS is a free, open-source Chromium-based browser that runs AI agents natively, offering a smarter, more productive browsing experience. It supports Chrome extensions and integrates AI agents to automate tasks, fill forms, and streamline workflows. Your data stays on your computer: you can use your own API keys or run local models via Ollama, making it a privacy-first alternative to tools like Perplexity, Comet, or Dia. With built-in productivity tools and app integrations, BrowserOS boosts efficiency while keeping control firmly in your hands. Being Chromium-based, BrowserOS lets you effortlessly import your bookmarks, passwords, and Chrome extensions in just a few clicks. BrowserOS works with OpenAI GPT models, Anthropic Claude, Google Gemini, and local AI models via Ollama or LMStudio. You can use your own API keys and effortlessly switch between providers. BrowserOS Agent Your AI productivity assistant that organizes and manages your browsing effortlessly Quickly list, group, or close tabs Save and resume browsing sessions Search your history and organize bookmarks Switch instantly to the tab you need BrowserOS Navigator – Automate web tasks with ease Navigate websites and search automatically Interact with pages without manual effort Handle repetitive tasks in seconds What makes BrowserOS special Feels like home - same familiar interface as Google Chrome, works with all your extensions AI agents that run on YOUR browser, not in the cloud Privacy first - bring your own keys or use local models with Ollama. Your browsing history stays on your computer Open source and community driven - see exactly what's happening under the hood MCP store to one-click install popular MCPs and use them directly in the browser bar (coming soon) Built-in AI ad blocker that works across more scenarios! BrowserOS 0.46.0 changelog: Run Claude Code & Codex right in your browser — We've extended the agent harness to bring full coding agents into BrowserOS. Claude Code and Codex now come bundled and plug straight into the assistant, so you can drive your browser with the agent — and the subscription — you already use. A brand new experience — A redesigned new tab, a calmer composer, and a rebuilt command center for switching between agents. The whole assistant is cleaner, faster to reach, and easier to live in. New MCP tools — We rebuilt the browser tool surface from the ground up — a tighter, more reliable set of tools for agents to drive the browser. Plus one-click install of BrowserOS as an MCP server into the agents you already run, with automatic URL sync. Chromium 148 — Updated to the latest Chromium base with all recent upstream fixes and security patches. Streamlined — We've pulled back a few features that weren't getting much use — Skills, Soul, and Memory — so we can focus and ship better versions of them soon. Download: BrowserOS 0.46.0 | 181.0 MB (Open Source) Download: BrowserOS for macOS | 485.0 MB Links: BrowserOS Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      591
    2. 2
      +Edouard
      187
    3. 3
      PsYcHoKiLLa
      77
    4. 4
      Michael Scrip
      75
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!