Problem uninstalling Xubuntu from Windows XP


Recommended Posts

I decided to install Xubuntu 8.04 inside my Windows installation from the ISO file I downloaded [Wubi]. After having some fun, I decided to uninstall it, and this where the problem arises.

When I clicked the uninstall button in my Add/Remove Window in XP, nothing happens, there is no activity related to the uninstallation of Xubuntu. I had a similar problem a few days back, so I decided to remove all related files and mistakenly deleted ntldr file which resulted in a terrible mess.

Anyways, help me out guys!

Yeah, ntldr is a Windows file. Very important, and has nothing to do with Linux. Don't know why you deleted it, but I think you can pop in the XP CD and boot into "recovery console" and do a fixboot to have it repair itself.

Also, since Linux isn't a Windows app, you won't see it under the Windows "add/remove programs" button.

I'm not very familiar with wubi, but it is a virtual filesystem creator, so you don't have to repartition, and then Ubuntu gets "installed" onto some filesystem images that exist on your NTFS partition. I would think that merely removing these filesystem images would "remove" Ubuntu quite well. :yes:

If wubi installs GRUB as your boot loader, then you can also do a fixmbr at your XP CD boot "repair console" to set the Microsoft boot loader into the MBR.

That should be about it, really. Remove the filesystem images, and restore Microsoft boot from the recovery console (if wubi installed GRUB).

NTLDR is Missing:

  Quote
1. Insert the Windows XP bootable CD into the computer.

2. When prompted to press any key to boot from the CD, press any key.

3. Once in the Windows XP setup menu press the "R" key to repair Windows.

4. Log into your Windows installation by pressing the "1" key and pressing enter.

5. You will then be prompted for your administrator password, enter that password.

6. Copy the below two files to the root directory of the primary hard disk.

In the below example we are copying these files from the CD-ROM drive letter, which in this case is "e." This letter may be different on your computer.

copy e:\i386\ntldr c:\

copy e:\i386\ntdetect.com c:\

7. Once both of these files have been successfully copied, remove the CD from the computer and reboot.

Try that.

^^^ Why use a solution (logging in and copying files to a specific drive letter) that is more complex than it has to be?

http://support.microsoft.com/kb/315233 <== Perform "Resolution" item #1, and you are done. (Y)

There was a bug in earlier versions of Wubi which left its entry behind in Add/Remove, despite having uninstalled Ubuntu. You can delete the entry by editing the registry. Remove the Wubi entry at the following address:

HKeyLocalMachine\Software\Microsoft\Windows\CurrentVersion\Uninstall\

  markjensen said:
Yeah, ntldr is a Windows file. Very important, and has nothing to do with Linux. Don't know why you deleted it, but I think you can pop in the XP CD and boot into "recovery console" and do a fixboot to have it repair itself.

Also, since Linux isn't a Windows app, you won't see it under the Windows "add/remove programs" button.

I'm not very familiar with wubi, but it is a virtual filesystem creator, so you don't have to repartition, and then Ubuntu gets "installed" onto some filesystem images that exist on your NTFS partition. I would think that merely removing these filesystem images would "remove" Ubuntu quite well. :yes:

If wubi installs GRUB as your boot loader, then you can also do a fixmbr at your XP CD boot "repair console" to set the Microsoft boot loader into the MBR.

That should be about it, really. Remove the filesystem images, and restore Microsoft boot from the recovery console (if wubi installed GRUB).

Oh don't worry about the ntldr, I managed to download the file and place it in the C: using the Ubuntu LiveCD. Easy as that.

  Wilhelmus said:
NTLDR is Missing:

Try that.

I solved that. I just mentioned it in my post to demonstrate that I have done something about removing Xubuntu.

  Mr Fish said:
There was a bug in earlier versions of Wubi which left its entry behind in Add/Remove, despite having uninstalled Ubuntu. You can delete the entry by editing the registry. Remove the Wubi entry at the following address:

HKeyLocalMachine\Software\Microsoft\Windows\CurrentVersion\Uninstall\

All my Linux files are intact. So it is not the entry problem. Besides, I see it every time in the boot menu.

  • 3 weeks later...

Finally got the problem solved. Here is how I did it:

1) Microsoft Support [Click]

2) Backup your boot.ini

3) Edit your boot.ini

4) In the boot.ini file, delete the line c:/wubildr = "Xubuntu" or something similar to that. Click Ok and close. With that you have removed the boot entry and you will no longer be shown a choice of Xubuntu or Windows XP during boot.

5) Remove the related Xubuntu files manually by deleting them:

(i) C:/wubildr and wubildr.mbr

(ii) [The drive in which you installed Xubuntu]:/ubuntu,wubildr and wubildr.mbr

You re done.

To remove the entry in Add/Remove, use Mr Fish's method:

  Quote
There was a bug in earlier versions of Wubi which left its entry behind in Add/Remove, despite having uninstalled Ubuntu. You can delete the entry by editing the registry. Remove the Wubi entry at the following address:

HKeyLocalMachine\Software\Microsoft\Windows\CurrentVersion\Uninstall\

Thanks for your help guys!

  • 2 weeks later...
  Quote
Also, since Linux isn't a Windows app, you won't see it under the Windows "add/remove programs" button.

Yes it is, he used wubi, so yes, it IS a windows apps. It just require a reboot to use it, but it is in C:/Program Files/ and got an entry in add ans remove program.

^^^ Linux is not a Windows app.

wubi does, however, place a sort of entry to "uninstall" that resets the MBR and removes the imaged filesystem. So, I guess to the user it does appear this way.

In the end, reset the MBR and you are free to remove the image file.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • BurnAware 18.7 by Razvan Serea Free burning software to create CDs, DVDs, and Blu-ray discs of all types. BurnAware is a full-fledged, easy-to-use burning software which allows users to write all types of files such as digital photos, archives, documents, music and videos to CDs, DVDs and Blu-ray Discs, including BDXL and M-Disc. With BurnAware, you also be able to create boot or multisession discs, high-quality Audio CDs and Video DVDs, make and burn ISO images, copy and backup discs, extract audio tracks, verify and recover data from multisession or unreadable discs. BurnAware is available in three editions - Free, Premium and Professional. Compare and pick edition which is suitable for you. Features Burn files and folders to CD, DVD or Blu-ray Discs. Append or update multisession discs. Burn standard or boot disc images. Burn ISO files to multiple recorders simultaneously. Create boot CDs or DVDs. Create Audio CDs. Create DVD-Video discs. Create MP3 CD / DVD / Blu-ray Discs. Make standard or boot disc images. Copy CD, DVD or Blu-ray Discs to ISO images. Copy from discs to discs. Verify discs byte by byte. Recover files from damaged discs or different sessions. Extract audio tracks from Audio CDs. Erase and format re-writable discs. View detailed disc and drive information. Supports All media types (CD/DVD/Blu-ray Disc) including Double Layer All current hardware interfaces (IDE/SCSI/USB/1394/SATA) including AHCI UDF/ISO9660/Joliet file systems (any combination) On-the-fly writing (no staging to hard drive first) Verification of written files Multisession DVD-RW/DVD+RW Unicode CD-Text (tracks and disc) Compatible with Windows Vista 7, 8, 10, 11 (32-bit or 64-bit) BurnAware 18.7 changelog: Updated translations. Updated disc burning SDK. Improved indirect disc copying (CD <-> DVD). Optimized overall performance on 64-bit systems. Download: BurnAware Free 18.7 | 11.8 MB (Freeware) View: BurnAware Free Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Yeah, as a general rule I prefer standard XBox-like controllers that work like usual out-of-the-box. additional software tends to be overkill. p.s. even my 8BitDo Ultimate 2C wired, while I had to tweak something (setup a udev rule) on Linux for it to work 'out-of-the-box' (which is required for Xinput mode to work in kernels prior to 6.12), I can slightly tweak a small amount of additional buttons/features on the controller itself, no software needed.
    • Are you saying that you don’t think they will be adding the “.” versioning? They definitely will.
    • What will you find out about me?? Are you not going to answer this question as well? Empty threats for just asking questions😂
    • My Alexa Show is just a glorified Alarm clock and weather reporter.
  • Recent Achievements

    • Apprentice
      Adrian Williams went up a rank
      Apprentice
    • Reacting Well
      BashOrgRu earned a badge
      Reacting Well
    • Collaborator
      CHUNWEI earned a badge
      Collaborator
    • Apprentice
      Cole Multipass went up a rank
      Apprentice
    • Posting Machine
      David Uzondu earned a badge
      Posting Machine
  • Popular Contributors

    1. 1
      +primortal
      535
    2. 2
      ATLien_0
      265
    3. 3
      +Edouard
      193
    4. 4
      +FloatingFatMan
      183
    5. 5
      snowy owl
      135
  • Tell a friend

    Love Neowin? Tell a friend!