Rumour: First PS3 firmware 2.5 details

By +Audioboxer
in PlayStation

 Share

Recommended Posts

Grand Master

AbandonedTrolley

Posted
Posted
Because the likelyhood is that the PS3 controller works independently of the PS3 and is a BT device, maybe you can't send a 'kill' signal to it.

The controllers will turn off automatically if you shut down the PS3 so they should be able to impliment something.

Grand Master

Ricardo Gil

Posted
Posted
Isn't that already there? My controller has turned itself off a few times before when left alone for a short while. It isn't low on charge, BTW! :D

I've mentioned that before in these forums, a friend of mine has a JAP 60GB and his controllers power off automatically.

Would be much better than taking screen shots.

But I think Sony just have other priorities, think they gave this feature a back-seat for now.

Yeah, it took them months just to let you update the firmware without having to pair a controller, or navigate the XMB with the analog. They must be busy making couches and other virtual furniture.

Grand Master

DirtyLarry Veteran

Posted
  • Veteran
Posted
I don't suppose there's anyway to get optical and hdmi outputs working at the same time correct? I have no receiver. I just want my TV speakers to have sound too.

Sure there is, as that is how my setup is, HDMI for the Video, Optical for the Audio.

I believe you just choose each setting as such in the settings and you are good to go.

Proficient

AJR1

Posted
Posted
Sure there is, as that is how my setup is, HDMI for the Video, Optical for the Audio.

I believe you just choose each setting as such in the settings and you are good to go.

Isnt optical supposed to be of lower quality than what HDMi 1.3 carries?

I looked into this, but read that HDMI was actually better quality.

Grand Master

Kreuger

Posted
Posted
Then a battery charge doesn't last long.
Something wrong. I've sat and played COD4 for 3 or 4 hours straight once or twice and it never even got below 2 of 3 little blocks. Mine holds for seemingly a long time, unlike I found with the xbox 360 controllers. Anyways, I'd also like to have the ability to press the PS button when a message is received and have it bring you directly to the message.
Grand Master

jerzdawg

Posted
Posted
Sorry about my unclear question.

Can I use HDMI and optical for audio at the same time? My 5.1 speakers use optical, and I want my TV to have sound through HDMI

I do not believe so, you have to choose the output setting and you can only select one.

For the above posters questioning which is better to use.... unless you have a receiver that is capable of receiving the 5.1 audio via HDMI, you are better off using optical for 5.1 surround.

Grand Master

DirtyLarry Veteran

Posted
  • Veteran
Posted
Isnt optical supposed to be of lower quality than what HDMi 1.3 carries?

I looked into this, but read that HDMI was actually better quality.

Yep, its better to be using HDMI then using the Optical. There is a level of quality loss when using an optical cable versus a HDMI cable.

My battery lasts atleast 8-10 hours...

I do not believe so, you have to choose the output setting and you can only select one.

For the above posters questioning which is better to use.... unless you have a receiver that is capable of receiving the 5.1 audio via HDMI, you are better off using optical for 5.1 surround.

What jerzdawg said. My receiver was nothing super fancy, so for the 5.1 Digital Dolby, I need to use Optical. And I will tell you what, it sounds pretty damn good to me either way.

Grand Master

jerzdawg

Posted
Posted
What jerzdawg said. My receiver was nothing super fancy, so for the 5.1 Digital Dolby, I need to use Optical. And I will tell you what, it sounds pretty damn good to me either way.

I forgot to tell you DL.. I finally picked up a new receiver... this one can accept the digital audio via HDMI so I have been able to hear the dolby true hd and dtshd or whatever they call it for bluray, it def sounds great... but I still don't know if it is due to that or that it was an upgrade from my aging sony receiver...

Grand Master

DirtyLarry Veteran

Posted
  • Veteran
Posted
I forgot to tell you DL.. I finally picked up a new receiver... this one can accept the digital audio via HDMI so I have been able to hear the dolby true hd and dtshd or whatever they call it for bluray, it def sounds great... but I still don't know if it is due to that or that it was an upgrade from my aging sony receiver...

Nice. I gotta check it out one day and see if I can hear the difference.

The only thing I can really notice is a lot of newer games are actually made in Dolby Digital, where even games released earlier this year were not, so the new games it does make a big difference in the sound.

Grand Master

jerzdawg

Posted
Posted
Nice. I gotta check it out one day and see if I can hear the difference.

The only thing I can really notice is a lot of newer games are actually made in Dolby Digital, where even games released earlier this year were not, so the new games it does make a big difference in the sound.

hmm... perhaps our resident ps3 expert AB can answer this.... is there any plans for a game to be released with the audio formats such as TrueHD or DTS-HD ..

Grand Master

soniqstylz

Posted
Posted
hmm... perhaps our resident ps3 expert AB can answer this.... is there any plans for a game to be released with the audio formats such as TrueHD or DTS-HD ..

MGS4, Uncharted, and R:FoM were PCM 7.1, according to a couple posts on Blu-ray.com.

I remember Kojima saying they were using PCM 7.1 a long time ago, tho, so I know that holds up.

Grand Master

jerzdawg

Posted
Posted
MGS4, Uncharted, and R:FoM were PCM 7.1, according to a couple posts on Blu-ray.com.

I remember Kojima saying they were using PCM 7.1 a long time ago, tho, so I know that holds up.

nice... i only have mgs4... but I would like to see if there is any difference at all ... thanks.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Nothing Ear (a) and CMF Buds Pro 2 with active noise cancellation drop to lowest price ever

      By Fiza Ali · Posted

      Nothing Ear (a) and CMF Buds Pro 2 with active noise cancellation drop to lowest price ever by Fiza Ali With Prime Day 2026 scheduled to run from Tuesday 23 to Friday 26 June, Amazon has already begun rolling out early access offers ahead of the main event. Particularly, Nothing Ear (a) and CMF Buds Pro 2 wireless earbuds have dropped to their lowest price ever with limited Prime deal offering 33% and 24% discounts, respectively. Nothing Ear (a) are equipped with 11mm dynamic drivers featuring a PM1 + TPU diaphragm. For noise control, the earbuds offer active noise cancellation (ANC) of up to 45dB across frequencies reaching 5,000Hz. The smart ANC algorithm adapts to surrounding noise levels, while a Transparency Mode allows users to remain aware of their environment when needed. Connectivity is handled via Bluetooth 5.3, with support for AAC, SBC, and LDAC audio codecs. Additional features include IP54-rated earbuds for dust and splash resistance, paired with an IPX2-rated charging case. Furthermore, users also benefit from pinch controls, in-ear detection, Google Fast Pair, Microsoft Swift Pair, dual-device connectivity, and a low-latency mode designed for gaming and video playback. The Nothing X app unlocks a range of customisation options, including a personalised equaliser, bass enhancement, control remapping, ear tip fit testing, firmware updates, dual-device management, a Find My Earbuds feature, and low-latency mode settings. When it comes to the battery, the earbuds house a 46mAh lithium-ion battery, while the charging case contains a 500mAh cell. With ANC disabled, users can expect up to 9.5 hours of playback from the earbuds and up to 42.5 hours in total with the charging case. With ANC enabled, battery life is rated at up to 5.5 hours per charge and up to 24.5 hours combined with the case. Finally, fast charging is also supported that should provide up to 10 hours of playback from a 10-minute charge with ANC turned off. Nothing Ear (a) Wireless Earbuds (Black): $53.20 (Amazon US) - 33% The CMF Buds Pro 2 feature a dual-driver audio system consisting of an 11mm bass driver and a 6mm micro-planar tweeter. The earbuds use PU (polyurethane) and PET (polyethylene terephthalate) titanium-coated diaphragms and are tuned by Nothing to deliver balanced audio performance. They further support active noise cancellation of up to 50dB across a frequency range of up to 5,000Hz, and noise control features include a Smart ANC algorithm, Adaptive ANC, Transparency Mode, and Clear Voice Technology 2.0. For calls, the CMF Buds Pro 2 use a total of six microphones and feature an environmental noise-cancelling algorithm, Clear Voice Technology 3.0, and Wind Noise Reduction 3.0 that should improve voice clarity during conversations. Furthermore, when it comes to the connectivity, it is provided through Bluetooth 5.4. Additional features include an IP55 rating for dust and water resistance, Google Fast Pair, Microsoft Swift Pair, in-ear detection, a low-latency mode, and a Find My Earbuds function. Moreover, through the Nothing X app for Android and iOS, users can access custom EQ settings, a bass enhancement algorithm, customisable controls, Find My Earbuds, low-latency mode, dual-device connectivity, an ear tip fit test, and firmware updates. The earbuds contain a 60mAh rechargeable lithium-ion battery, while the charging case houses a 460mAh battery. A full charge of the earbuds and case via USB-C should take approximately 85 minutes, while the earbuds alone should be fully recharged in the case in around 60 minutes. Battery life is rated at up to 11 hours of playback on a single charge and up to 43 hours with the charging case when ANC is turned off. With ANC enabled, playback time is reduced to up to 6.5 hours on the earbuds and up to 26 hours with the charging case. Talk time is rated at up to 6 hours on the earbuds and 25 hours with the case with ANC disabled, or up to 4.8 hours and 18.6 hours, respectively, with ANC enabled. CMF Buds Pro 2 Wireless Earbuds (Dark Grey): $37.05 (Amazon US) - 24% Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Windows 11 version 26H2 is now available for testing in the latest preview build

      By excalpius · Posted

      I'll move to it when it hits beta, I suspect.
    • Windows 11 gets new audio improvements in the latest builds

      By excalpius · Posted

      The entire world moved to the vastly superior and now universally supported Dolby Atmos technology a very long time ago, mate.
    • Nothing kills CMF Phone 2 Pro's successor due to rising memory prices

      By Jose_49 · Posted

      Insane. This is as crazy as COVID back in 2020, where you could go back one year in time and tell them that everybody's gonna be locked in and now with memory that your old computer was going to be worth more tomorrow
    • Microsoft: Windows 11 could finally solve a major issue across AMD, Nvidia, and Intel GPUs

      By Teddy Albina · Posted

      "Bad Pool Caller" meaning one of your software is trying to change memory it doesn't own, in a memory pool that's it ,nothing to do with Windows

  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later

  • Popular Contributors

    1. 1
      +primortal
      544
    2. 2
      +Edouard
      187
    3. 3
      Michael Scrip
      77
    4. 4
      PsYcHoKiLLa
      75
    5. 5
      Steven P.
      71
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!