Sound via a ATi 4850 over HDMI


Recommended Posts

Hey guys, so I read somewhere that the ATi HD Cards all support HDMI via an adapter similar to those used for DVI-VGA. I also read that doing this also allows for sound to travel via HDMI.

Anyone have any ideas on this? My PC will primarily be hooked up to my HDTV and obviously this'd save a audio cable if it were possible. I wish I could find the original review to double check, but I cant.

Thanks guys

Link to comment
https://www.neowin.net/forum/topic/662546-sound-via-a-ati-4850-over-hdmi/
Share on other sites

Look what I found,

http://www.sapphiretech.com/us/productfile...ound_output.pdf

Anyone have any experience with doing this? From what I understand the Graphics Card has its OWN Audio Processor instead of just forwarding the audio from the Internal Audio. Doubt it's any worse then the built in SoundCard on my motherboard.

Go to Realtek, grab download the "ATI HDMI Audio Device" Driver and install it.

http://www.realtek.com.tw/downloads/downlo...p;GetDown=false

Connect the HDMI Cable

Next right click on the volume icon in the system tray (by the time) and choose 'Playback Devices'.

Then right click on Realtek HDMI Output (ATi HDMI Audio), and select 'Set as Default Device'.

Voila, sound over HDMI!

Note: My 'Set as Default Device' is grayed out since I don't have HDMI Connected at the moment, it will become available once you connect the card to a HDMI source.

post-11767-1219886278.jpg

  • 1 year later...
Go to Realtek, grab download the "ATI HDMI Audio Device" Driver and install it.

http://www.realtek.com.tw/downloads/downlo...p;GetDown=false

Connect the HDMI Cable

Next right click on the volume icon in the system tray (by the time) and choose 'Playback Devices'.

Then right click on Realtek HDMI Output (ATi HDMI Audio), and select 'Set as Default Device'.

Voila, sound over HDMI!

Note: My 'Set as Default Device' is grayed out since I don't have HDMI Connected at the moment, it will become available once you connect the card to a HDMI source.

Hi ive downloaded and installed drivers ,i just dont know how to do it in windows xp :( my video card is ati 4850 and i have dvi connected in my video card and hdmi in my lcd - can someone please tell me how to do it in windows xp please!! :)

edit: im sorry :( i just saw post 9.. the problem now is that under Sound playback /default devices now i see Realtec HD audio output and sound tap recorder .. someone please help :)

Edited by thefear1
Hi ive downloaded and installed drivers ,i just dont know how to do it in windows xp :( my video card is ati 4850 and i have dvi connected in my video card and hdmi in my lcd - can someone please tell me how to do it in windows xp please!! :)

edit: im sorry :( i just saw post 9.. the problem now is that under Sound playback /default devices now i see Realtec HD audio output and sound tap recorder .. someone please help :)

Audio will not transfer from the DVI port. To transfer audio and video in the same cable you must use a HDMI to HDMI connection.

Does your graphics card have a HDMI port?

no my vid.card is 4850 and it has 2 dvi ports.. dvi side of the cable goes from the card and hdmi side in the lcd...i 've connected it to the lcd and been watching 1080p movies and stuff but the sound comes from my computer speakers :) can i make it come out from the tv?

Edited by thefear1
If there is no HDMI port and it indeed can transfer audio over HDMI, it probably has a non-standard DVI port and requires a special DVI-HDMI adapter.

Actually dvi ports are capable of sound its just that most companies didnt do it because computers didnt need to but now that lcd screens are more common the 4xxx series and up can do it via an regular dvi-hdmi adapter.

"DVI to HDMIUnlike HDMI, DVI usually carries no audio data in its TMDS channel. However, as DVI is for the most part compatible with HDMI (see Compatibility with DVI), it is just as possible to support including audio data by incorporating the audio in the TMDS signal. Because DVI displays typically have no sound capabilities, a DVI to HDMI adapter/cable can then be used to connect the device to an HDMI display. For instance, this feature allows PCs to send audiovisual data to a high definition television. It is increasingly found on modern computer graphics cards (e.g. cards by Nvidia[1] and ATI[2]) and certain motherboards with integrated graphics."

Hmm Some dvi to hdmi connectors dont allow the audio. IM guessing due to not having all the required pins .So if you still have the dv to hdmi adapter that came with your card then you should be set.

IF not this one should work .

http://www.newegg.com/Product/Product.aspx...N82E16814999010

sorry had wrong link.

You need an Official ATI HD Radion DVI to HDMI adaptor, these will carry sound from the graphics card over HDMI.

Most DVI to HDMI adaptors will not carry sound, however the official ATI ones too.

I?m using one of these on my media centre pc: http://cgi.ebay.co.uk/Original-ATI-HD-Rade...=item4ceba0252b

After you have an ATI DVI to HDMI adaptor just do what tkyoshi says in the above post and you will get audio and video over HDM:):)

Any drivers for sound are included with the Catalyst drivers.

  • 7 months later...

you do not need any cables to connect to the graphics card from the inside of the computer apart from the power cable. on ATI cards the DVI-HDMI port is sometimes a different color. on my 4850 the port is colored yellow. all you need is the special DVI-HDMI adapter and a HDMI lead, plug them in and then into the TV/LCD monitor and enable the HDMI audio output on windows. the Catalyst drivers come with the Audio drivers included. install them and you are ready to go.

im confused - there's a DVI-to-HDMI adapter... ok but that wont transmit sound. DVI wont transmit sound at all...

if you have an HDMI plug on the card, then that'll pass audio to a tv (for example) when the option is selected in the driver (or during the install like i do)

im confused - there's a DVI-to-HDMI adapter... ok but that wont transmit sound. DVI wont transmit sound at all...

if you have an HDMI plug on the card, then that'll pass audio to a tv (for example) when the option is selected in the driver (or during the install like i do)

Yes it will transmit sound, i use it alot. the DVI port on the sound card is modified to transmit sound on the newer cards, and the adapters are able to pick the sound up and push it through the HDMI cable to the Monitor /TV.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AltSendme 0.4.2 is out.
    • Simple answer is yes, you will still get the Windows updates and as long as browser is up to date, you will be good. Only thing secure boot does is protect you against boot level threats and make it harder to install other OS's. I've been looking into this pretty thoroughly lately myself as wifes computer has secure boot disabled plus my other, older computers that run Linux, don't have secure boot enabled. Have seen all kinds of questions about this on the Linux Mint and MX Linux forums. Just don't suddenly enable secure boot now.
    • How many other companies will follow Ford's lead? Or, have they already gotten lazy and become enslaved to AI--and now can't figure out how to get out of that mess.
    • Why would any self-respecting intelligent person follow any recommendation by Donald's GOP administration? With almost two years of fabrications, deceit, and blatantly illegal behavior, why believe them now? They had best be gone after the November 2026 election, so we'll wait and see.
    • AltSendme 0.4.2 by Razvan Serea AltSendme is a minimal, cross-platform application designed for fast, secure, and private peer-to-peer file transfers. It allows users to send files or entire directories directly between devices without relying on cloud servers, accounts, or any personal information. Everything is encrypted end-to-end using modern protocols like QUIC and TLS 1.3, ensuring both strong security and low-latency performance. Transfers are verified with BLAKE3 for data integrity, and interrupted downloads automatically resume, making the experience reliable even on unstable connections. You can transfer anything—images, videos, documents, and more. Integrity checks are performed on both ends, so your files are automatically verified for correctness during both sending and receiving. AltSendme works seamlessly across local networks or long-distance links, capable of saturating multi-gigabit connections for extremely fast delivery. With built-in NAT traversal and encrypted relay fallback, it connects devices almost anywhere. The app integrates with the Sendme CLI and will soon support mobile and web platforms. Fully free and open-source, AltSendme offers a lightweight, privacy-first alternative to traditional cloud-based services, removing size limits, upload costs, and unnecessary data exposure. AltSendme 0.4.1 changelog: Release Highlights Self-hosted relays: Run your own iroh relay so transfers don't rely on public infrastructure. Includes a full deployment template in deploy/relay/ with Docker Compose for a VPS and configuration examples for production use. Fly.io support: One-click deploy template for Fly.io, including a quick-start config (fly.dev.toml) for testing without a custom domain, plus production setup with Let's Encrypt and your own hostname. Relay settings UI: New Settings → Network panel to choose how AltSendme connects: automatic public relays, custom self-hosted URLs (with optional auth token), or disabled. Test connections, verify latency, and see live relay status in the footer. Disable relays: Turn off relay servers entirely when you only need same-network transfers (e.g. LAN). Direct connections only. No relay hop required when devices can reach each other. Android graduates from beta: Android is now part of the regular release cycle alongside desktop. APKs ship with each version (universal, arm64, and armv7). Other improvements Private relay access control via shared auth token Relay fallback notifications when a custom relay is unreachable Broadcast mode toggle in sharing settings Android release build fixes (split-per-ABI APKs, universal APK preservation) UI polish: mobile safe-area insets, dropzone layout, transfer progress animation Bug fixes for minification-related serialization issues and system tray icon loading What's Changed feat(relay): add relay status functionality and settings UI (a120cdf) feat(relay): implement custom relay server configuration and verification (51276c7) feat(relay): add configuration for private relay access and enhance observability features (48fbabf) feat(relay): enhance relay URL validation, display connection status (d4fffa0) feat(relay): add RelayChangeGuard component and enhance relay-related translations (16ba514) feat(broadcast): add toggle setting for broadcast mode in sharing UI (ca6d977) fix(relay): correct QUIC discovery port, pin image, templatize fly.dev (52a2ba5) fix: More broken serialization due to minification (67491a9) fix(android): preserve true universal APK across per-ABI builds (e9f256f) fix(ui): conditional safe-area insets padding on mobile (1182f0e) refactor(transfer): CircularRing component animation fix (944572b) chore(android): drop x86 and x86_64 release APKs, keep universal+arm64+armv7 (34ada0b) AltSendme 0.4.2 release highlight: Modern Debian & Ubuntu support. The .deb package now declares compatible dependency alternatives (libayatana-appindicator3-1, libgtk-3-0t64) alongside the older Ubuntu 22.04 names, so it installs cleanly on Debian and Ubuntu 24.04+. Fixed settings sidebar header being covered by the custom title bar on Linux. What's Changed #172 Fixed #168 Addressed feat(tauri): support for modern debian (80f548d) fix(setting-sidebar): linux-only custom title bar covering nav header (fb55c9d) Download: AltSendme 0.4.2 | ARM64 | ~9.0 MB (Open Source) Download: AltSendme for MacOS | Android Links: AltSendme Home Page | GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      494
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      149
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!