Is readyboost only useful for slow or low-memory systems?


Recommended Posts

The reason I asked was because some have been telling me its only good for low memory systems, however, others have said that your readyboost drive should be as large as the amount of ram you have.

With 8GB of RAM it'll probably just make it slower.

I have a fairly new laptop with 2Gb ram and there is a clear difference with readyboost in use. There's certainly no downside to trying, is there?!

Agreed.

Pop one in, test it out with some games and other applications you use a lot. See if any thing feels different (loads faster/slower, less/more lag, etc.) If the results aren't what you expected, rip out the external memory and get on with your life.

As for as official documentation goes, Microsoft doesn't make it clear when to use ReadyBoost (only that it'll help make your pc perform better).

Personally .. I think it's only usefull when you have 1GB of RAM or less in your computer. What ReadyBoost does, it comes between the RAM and the HDD-based swap file. Rather then writing to the god-awefull-slow HDD, it'll write memory-data on the ReadyBoost enabled flash memory making it perform better. As you may know, swap files are primairly made for when the physical RAM is full and more RAM is needed. That is why you'll barely see improvements on 1GB++ systems as they don't need to swap as much as low-memory systems.

Hope that clears it up for some people.

Ps. The minimum amount of RAM required by Windows Vista is 512MB of physical RAM. You won't see Vista systems with less (nor do you want to...)

Hmmm, 8 gig flashdrives aren't that expensive, but I would want to know if its helping, no difference, or even going slower.

Is there any way I can benchmark how vista performs with and without readyboost? Not just benchmark the performance of the USB drive itself.

ReadyBoost is useful if your trying to do ALOT of things which require huge chunks of memory...

Example:

Open & flick between/use the following

- The entire Adobe Master CS3 suite

- Web Browser

- Crysis

- VM Machines

My RAM doesn't fill up... ;)

As you may know, swap files are primairly made for when the physical RAM is full and more RAM is needed. That is why you'll barely see improvements on 1GB++ systems as they don't need to swap as much as low-memory systems.

That's absolutely not true. You really should understand when and how the swap file is used before trying to explain it to someone else. The swap file is ALWAYS in use regardless of how much ram you have or how "full" the ram is. MS designs their OS's to use virtual memory at all times.

That's absolutely not true. You really should understand when and how the swap file is used before trying to explain it to someone else. The swap file is ALWAYS in use regardless of how much ram you have or how "full" the ram is. MS designs their OS's to use virtual memory at all times.

Bad design in my opinion, Linux and Mac OS X use all available RAM at all times, after all, thats what it's there for.

well I think the readyboost option works for some people because the USB Flash Drive is fast at Read/Write too. no moving parts like a page file on a regular harddrive. Unless your on SSD. ;)

I have 3 gb's of ram, and I found that ready boost did not help at all. I turned the service off.

Bad idea, I'd re-enable that service. Readyboost controls the "readyboot" service which is used to decrease boot times (using RAM as a cache during boot time, has nothing to do with flash drives, this service should stay enabled.)

That's absolutely not true. You really should understand when and how the swap file is used before trying to explain it to someone else. The swap file is ALWAYS in use regardless of how much ram you have or how "full" the ram is. MS designs their OS's to use virtual memory at all times.

True and not true .. It is true that all applications use virtual memory however this is mainly to garrantee all apps get enough RAM as the system may not have enough RAM to run everything at the same time. You can quickly test your own theory by turning off the page file (the official Microsoft name for it).

Bad idea, I'd re-enable that service. Readyboost controls the "readyboot" service which is used to decrease boot times (using RAM as a cache during boot time, has nothing to do with flash drives, this service should stay enabled.)

+1 (Y).

I dont know the working of the page file and RAM mangement, but in pritical terms I have found using a readboot device has made commonly used progams such as firefox and media center launch a hell of a lot quicker.

As mentioned previously, you should give it a try and see what results you get. As seems to be the case with Vista each persons experience with is various functions and features seems to vary wildly.

ready boost uses an external drive to boost your speeds for low memory systems. the theory is it's faster to use the flash memory than to use the HDD

so we really have 2 issues here:

1) if you are only turning on the service, without plugging in an external thumb drive, then no you won't see an increase and you can turn the service off

2) if you readyboost with an external drive, then yes you should see an increase

but remember, this is for low memory systems. if you have 4GB then, even if you plug in an external drive, you won't see an increase. and those of you who are just turning on the service without plugging anything in are wasting your time

Ps. The minimum amount of RAM required by Windows Vista is 512MB of physical RAM. You won't see Vista systems with less (nor do you want to...)

That's the minimum amount of RAM required for INSTALLATION of Vista. Vista can "run" on less than that. I witnessed this truth during my previous job...

There was an eMachine computer on display with 512MB RAM running Vista basic. The 512MB was on 2 256MB sticks. One of the sticks failed leading to the display model crashing all the time. Management wanted the display model there and did not want to RTV the bad computer, so a stick was placed on order from eMachines under warranty. So, the defective stick was removed and the display model set back up while we were waiting on the RAM to arrive, and Vista still "ran" on 256MB. Now, actually trying to USE a vista machine with less than 512MB RAM would make me want to shoot myself, or better yet, the computer's owner.

Back on topic now. I had an HP micro-tower that I use primarily for outputting video onto a highdef TV while streaming it from my other computer on the network. It has 1.5GB RAM. I was using a 2GB flash drive for readyboost on it at the time, and I found absolutely zero improvement, nor did I find it to slow things down either. Eventually, I just unplugged the flash drive. Now, the computer runs Ubuntu, just because I found Compiz to be more fun than Aero. For readyboost, I think it's really only good for the sub-1GB machines. The problem though, is that for readyboost to be worthwhile, a fast flash drive needs to be used, and the cheap $5 1GB flash drives generally don't cut it, and if you're going to spend $10 or more on a flash drive, you might as well buy RAM.

One thing to note about readyboost: it can be useful if you hibernate your machine. If you have 4GB memory and a 4GB readyboost stick, it will put the hibernation file on the stick which can dramatically improve resume times.

And, as others have said, the readyboost service also controlls the readyboot service. As a result, it shouldn't be disabled. Unless, of course, you want slower boot times and no boot optimization.

Disabling the service will not improve performance either.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Media Player Classic - Home Cinema 2.7.3 by Razvan Serea Media Player Classic - Home Cinema (MPC-HC) is a free and open-source video and audio player for Windows. MPC-HC is based on the original Guliverkli project (which is no longer maintained) and contains many additional features and bug fixes. As the continuation of the original Media Player Classic, MPC-HC isn’t flashy but it works with nearly any media format. MPC-HC uses DXVA technology to pass decoding operations to your modern video card, enhancing your viewing experience. And MPC-HC supports both physical and software DVDs with menus, chapter navigation, and subtitles. Overview of features A lot of people seem to be unaware of some of the awesome features that have been added to MPC-HC in the past years. Here is a list of useful options and features that everyone should know about: Dark interface Menu > View > Dark Theme When using dark theme it is also possible to change the height of the seekbar and size of the toolbar buttons. Options > Advanced Video preview on the seekbar Options > Tweaks > Show preview on seek bar Adjust playback speed Menu > Play > Playback rate The buttons in the player that control playback rate take a 2x step by default. This can be customized to smaller values (like 10%): Options > Playback > Speed step Adjusting playback speed works best with the internal audio renderer. This also has automatic pitch correction. Options > Playback > Output > Audio Renderer MPC-HC can remember playback position, so you can resume from that point later Options > Player > History You can quickly seek through a video with Ctrl + Mouse Scrollwheel. You can jump to next/previous file in a folder by pressing PageUp/PageDown. You can perform automatic actions at end of file. For example to go to next file or close player. Options > Playback > After Playback (permanent setting) Menu > Play > After Playback (for current file only) A-B repeat - You can loop a segment of a video. Press [ and ] to set start and stop markers. You can rotate/flip/mirror/stretch/zoom the video Menu > View > Pan&Scan This is also easily done with hotkeys (see below). There are lots of keyboard hotkeys and mouse actions to control the player. They can be customized as well. Options > Player > Keys Tip: there is a search box above the table. You can stream videos directly from Youtube and many other video websites You can stream videos directly from Youtube and many other video websites Put yt-dlp.exe or youtube-dl.exe in the MPC-HC installation folder. Then you can open website URLs in the player: Menu > File > Open File/URL You can even download those videos: Menu > File > Save a copy Tip: to be able to download in best quality with yt-dlp/youtube-dl, it is recommended to also put ffmpeg.exe in the MPC-HC folder. Several YDL configuration options are found here: Options > Advanced This includes an option to specify the location of the .exe in case you don't want to put it in MPC-HC folder. Play HDR video This requires using madVR or MPC Video Renderer. After installation these renderers can be selected here: Options > Playback > Output Ability to search for and download subtitles, either automatically or manually (press D): Options > Subtitles > Misc Besides all these (new) features, there have also been many bugfixes and internal improvements in the player in the past years that give better performance and stability. It also has updated internal codecs. Support was added for CUE sheets, WebVTT subtitles, etc. Media Player Classic - Home Cinema 2.7.3 changelog: Updated LAV Filters to version 0.82 Updated MPC Video Renderer to version 0.10.4.2550 Updated MPC Audio Renderer A few crash fixes, bug fixes and small improvements. Download: MPC-HC 2.7.3 (x64) | Standalone | ~20.0 MB (Open Source) Download: MPC-HC 2.7.3 (x86) | Standalone Links: MPC-HC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft will finally let you sign in to Edge with a Google account by Usama Jawad As things currently stand, Microsoft Edge only allows you to sign in to the browser with a Microsoft Account (MSA). This allows you to sync your browser settings and other data across other devices, as long as you sign in with the same account. However, Microsoft is now modifying this mechanism in a way that will likely please many users. In an update to its Microsoft 365 Roadmap, Microsoft has indicated that it will soon let users sign into Edge using a Google account from the profile menu and the Edge sign-in screen. This will be in addition to the MSA login option, and it opens up new doors for people who prefer using Edge, but cannot be bothered to configure a Microsoft account. This brings several advantages such as the ability to sync your data across devices using just a Google account. It may even facilitate flexible single sign-on (SSO) experiences where you can quickly login to websites and services through a single Google account that is presented as the preferred sign-in option. Up until now, Microsoft allowed customers to indirectly use a Google account, by configuring a Google account as a Microsoft account, or by setting up a one-way sync option between Edge and Chrome. This is a rather interesting development, especially considering that Google Chrome still limits you to a Google account sign-in, but it will be interesting to see if the company reciprocates Microsoft's gesture in the future. This is not the only recent instance in which Microsoft has extended a handshake to Google via Edge. In April 2026, it began tracking the development of a work search banner for Google Search queries, just like the one present in Edge. However, if we go back almost seven years, to January 2020, Microsoft had emphasized that it had no plans to "integrate Google services into Microsoft Edge by default", in response to people requesting Google sign-in services on Edge. Fast-forward to today, and Microsoft is planning to release this feature in July 2026, with IT admins having the option to control its availability on Windows and macOS through the NonMicrosoftAccountSignInEnabled policy.
    • If they ever come out and say the AI is no longer accessible to the gen pop people aren't going to know how to tie their own shoelaces.
    • It's hard not to when they are shoehorning Ai into EVERYTHING. Some are active users by choice, I bet a lot of them are because it's shoved in their face the entire time.
    • Thunderbird 152.0 by Razvan Serea Thunderbird is a free, open-source, cross-platform application for managing email and news feeds. It is a local (rather than a web-based) email application that is powerful yet easy-to-use. Thunderbird is clean and elegant by default, but easily customizable to match your workflow and visual preferences. It is loaded with unique and powerful features. Thunderbird is developed, tested, translated and supported by the folks at Mozilla Corporation and by a group of dedicated volunteers. Thunderbird gives you control and ownership over your email. There are lots of add-ons available for Thunderbird that enable you to extend and customize your email experience. Thunderbird gives you IMAP/POP support, a built-in RSS reader, support for HTML mail, powerful quick search, saved search folders, advanced message filtering, message grouping, labels, return receipts, smart address book LDAP address completion, import tools, and the ability to manage multiple e-mail and newsgroup accounts. Thunderbird 152.0 changelog: SecurityDevices enabled in enterprise policies One-click account setup for Thundermail accounts What’s Changed Use 'Add' instead of 'New' for account, calendar, address book creation buttons GMail OAuth updated to use PKCE Mail server hostname also checked when detecting address books and calendars Updated about:rights to replace local with hosted url 'Hide completed tasks' now also hides cancelled tasks What’s Fixed New mail alerts appeared on wrong monitor in three-monitor setup Spam messages triggered new mail notifications before being moved to Spam folder Filtered IMAP or NNTP subscriptions were lost after closing Subscribe dialog 'Download Headers' dialog for newsgroups failed to open Messages nested deeper than 255 levels disappeared from threading view Performing Delete followed by Undo on thread parent message could corrupt view Single messages still appeared collapsible after thread members were deleted Updated threads remained misordered until folder refresh or resort Non-threaded subject sorting separated 'RE:' replies from original messages BCC recipients were included in signed email headers Filter search on Body missed draft messages containing German umlauts Thunderbird could crash during local message search Blocked file warning showed without 'Unblock File' button in compose window Forwarding/Redirecting Exchange messages failed with NS_ERROR_OUT_OF_MEMORY Compose window closed early and send progress dialog hung after NNTP failure Compose window stayed open after sending when mailnews.sendInBackground set Microsoft OAuth2 failed when HTTPS localhost redirect was not intercepted Pasting contact photos stopped working when photo button had focus Filter dialog lacked focus ring and had poorly distinguishable buttons Subfolder kept stale accessibility unread count after unread messages were deleted 'Edit as New Message' and inline 'Forward' not possible with PGP-signed messages Various MIME improvements EWS messages could go missing from folder view IMAP "Show only subscribed folders" could not be changed without restart Unable to delete more than 1000 messages at a time on Microsoft 365 EWS folders in Trash were moved to Trash again instead of being hard deleted IMAP notifications repeated for emails read on another device after sleep wake POP3 deadlocked when server went silent without closing socket Calendar acceptance no longer distinguished between single occurrence and series Transparent popups on macOS made calendar event editing difficult Duplicate attendees were added to invitations instead of being filtered out Task percentage complete was not preserved separately from status in tooltips Visual and UX improvements Security fixes Download: Thunderbird 152.0 for Windows (EN/US) | 32-bit | ~70.0 MB (Open Source) Download: Thunderbird 152.0 for Mac OS (EN/US) | 145.0 MB Download: Thunderbird 152.0 in other languages View: Thunderbird Website | Screenshot | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      89
    4. 4
      Steven P.
      76
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!