Recommended Posts

Yes. System restore is useless - until the first time you need it - and then it's invaluable. Unless you have a third party backup or imaging utility (such as True Image or Ghost) you should leave System Restore enabled. And even if you do have one of those utilities, there's no advantage to disabling System Restore except for disk space. And of course there's a huge pinned thread on UAC and why it makes no sense to disable it - it should just be set to silent mode if the pop-up warnings bother you. And then there's Superfetch - why exactly would someone disable that?

Oh well, to each his own ;)

System Restore has saved me a bunch of times. I would never disable it. It is better than SR was in Xp.

User Account Control

System Protection (drives are imaged, data stored seperately)

Superfetch

Windows Search

Sidebar

Security Center

Windows Modules Installer (I enable it whenever I need it, it stops TrustedInstaller barraging my CPU (and battery life)).

As for superfetch, battery life for me is more important than applications starting 2 seconds faster, and the constant hard drive thrashing that superfetch causes has a severe negative impact on battery life.

Because it slows down a lot of games and similar applications. It also sits there and crunches at your harddrives for no apparent reasons. The day I turned off, my performance increased for everything *but* the initial loading of programs. But a **** lot of good that does; I'd rather wait an extra second or two for the application to load and then have it run smoothly and effortlessly for the entirity of the session.

Your experiences may vary. Disabling Superfetch definitely speeds things up on my end for the applications I use the most.

Superfetch does NOT slow down games. I have tried superfetch on and off and games and intensive apps that need tons of memory perform the same and apps launch faster. When an application needs memory the cache is instantly purged which is no slower than allocating free memory.

Superfetch also does NOT cause hard drive thrashing, if you have constant drive thrashing it is something else, not superfetch. For me and I have 4 gb of ram superfetch only takes a minute of two to load everything into ram which is hardly "constant thrashing"

I have only disabled the sidebar and put UAC into silent mode on my desktop and laptop. Completely turning off UAC is pointless when you can use silent mode.

Edited by ViperAFK

I turn off Windows Defender and disable its service, Avast already does active scanning for spyware too, don't need two 2 programs doing the same thing.

Windows Search, cause I don't really do much file system searching at all, and when I do I'm fine with the extra ten seconds or so to do it.

Sidebar, cause its just useless to me and never found any gadgets that I reallyyy needed.

System restore, cause its just a waste of drive space and I keep very good backups on my own.

Readyboost service disabled, cause I just neverr use it.

Windows Firewall, I use Comodo.

Security Center, cause its just useless to me. I know the status of my security.

Uh, thats bout it. I've grown to prefer UAC on. I am curious bout SuperFetch now tho, never even tried turning it off. People really seeing performance gains with it off?

I turn off Windows Defender and disable its service, Avast already does active scanning for spyware too, don't need two 2 programs doing the same thing.

Windows Search, cause I don't really do much file system searching at all, and when I do I'm fine with the extra ten seconds or so to do it.

Sidebar, cause its just useless to me and never found any gadgets that I reallyyy needed.

System restore, cause its just a waste of drive space and I keep very good backups on my own.

Readyboost service disabled, cause I just neverr use it.

Windows Firewall, I use Comodo.

Security Center, cause its just useless to me. I know the status of my security.

Uh, thats bout it. I've grown to prefer UAC on. I am curious bout SuperFetch now tho, never even tried turning it off. People really seeing performance gains with it off?

if you have 2 gb of ram or more it will only make your system slower if you disbale it.

Well, I was just playing around with a Virtual Machine of Windows Vista Home Premium on my MacBook starting with 512MB of RAM and slowly moving up the ranks going up to 1.8GB of RAM (I only have 2GB of RAM and Leopard needs at least 200MB of RAM to function properly).

I can safely say that Vista was a LOT faster with SuperFetch OFF on anything below 1GB of RAM, however anything above 1GB SuperFetch was really helping.

For example

Firefox Web Browser 3.1 - 1.5GB of RAM

With Superfetch = 0.8 second load time

Without Superfetch = 3.7 second load time

Microsoft Word 2007 - 1.5GB of RAM

With Superfetch = 2 second load time

Without Superfetch = 12 seconds load time

Obviously I cannot check games as the virtual machine can only render DX7 graphics and i've got nothing that old :D but by the looks of things superfetch DOES dump everything when going into a full screen application. I saw my RAM useage jump from 82% to 12% in a matter of seconds, not paged to disk, dumped!

Superfetch does work in most normal situations, dont disable it.

EDIT: Forgot to mention boot times,

With SuperFetch an Extra 20 seconds, no big deal.

I disabled UAC because I think it is really annoying. I'm the only user of my PC so it's my fault if something goes wrong and I don't need UAC holding my hand and constantly popping up. :p

Also have disabled the sidebar because I don't use it.

Whats the point in buying Vista and disabling the features that make it!?!?!

Maybe because not everyone uses all the features of Vista?

As for the original question, I get rid lots of stuff: sidebar, search indexing, system restore, superfetch, etc...

vLite FTW! :punk:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Wow, that could have been dangerous, certainly not ready for these things. They have to be 100% or pretty well close to it. Not that I will see one i doubt, never mind ride in one, they may have them in London, but I doubt they will come to where I live.
    • Nothing kills CMF Phone 2 Pro's successor due to rising memory prices by Hamid Ganji Storage and RAM prices have been rising over the past year, leading to a significant increase in the cost of electronics for customers around the world. Many companies are now revising their plans for upcoming devices due to higher component costs and overall production expenses. CMF is the latest company to cancel the successor to one of its best-selling phones due to rising memory prices. CMF is a sub-brand of Nothing and focuses on making budget smartphones for growing markets. The brand launched the CMF Phone 2 Pro last year with some eye-catching specifications and an affordable price. While many customers may have been waiting for a successor this year, one of the company’s executives has announced that CMF will not release a new smartphone this year. And AI is to blame. As Nothing co-founder Akis Evangelidis announced on X, the company has been working on a successor to the CMF Phone 2 Pro, but with current memory prices, it cannot “build a phone that feels like a genuine step forward at a price that makes sense for CMF.” So, no new CMF phone will be launched this year. Meanwhile, Evangelidis said the company still has several new products in the pipeline, including some in entirely new categories. He added that the Nothing brand will also continue launching new products through 2026. Budget smartphones are among the first victims of the surge in RAM and memory prices, as they have become more expensive to build. The sharp increase in memory costs could also reshape the traditional price ranges associated with budget phones. Apple CEO Tim Cook also recently said that price increases for some of the company’s products are unavoidable because RAM and memory have become significantly more expensive this year. Analysts estimate that the base price of the upcoming iPhone 18 Pro could rise to $1,399 due to current market shortages.
    • Nudge me when they bring back hardware audio acceleration so I can get my EAX 5 back. We've evolved graphics to real-time path tracing, but regressed audio some 15 years back in time with this stupid software audio stack.
    • Ocenaudio 3.19.4 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.4 changelog: Adds fallback fonts so every language and symbol displays correctly Improves autosave and session recovery stability Improves region navigation and display Fixes a crash when the level meter is used on displays with a scaling greater than 200% Fixes memory corruption when using the silence selection tools Fixes crashes when closing a file while effects are still being processed Fixes a freeze when applying effects to many files at once (macOS) Fixes crashes related to audio devices on Windows Fixes invalid file names when exporting regions whose label is used as the file name Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hasleo Disk Clone 5.8.2.1 by Razvan Serea Hasleo Disk Clone is a free and all-in-one disk cloning software for Windows 11/10/8/7/Vista and Windows Server that can help you migrate Windows OS to another disk, clone one disk to another disk or clone one partition to another location quickly and efficiently. Completely Free Windows Migration and Disk/Partition Cloning Software Migrate Windows from one disk to another without reinstalling Windows, apps. Clone one disk to another and makes the data on 2 disks are exactly the same. Clone a partition to another location without losing any data. Easily adjust the size and location of the destination partition. Convert MBR to GPT or convert GPT to MBR by cloning. Creation of Windows PE emergency disk. Extremely fast cloning speed and multi-language support. Supported OS: Windows Vista/Server 2008 or later, fully compatible with GPT and UEFI. Hasleo Disk Clone 5.8.2.1 changelog: Fixed an issue that caused disk enumeration to fail Fixed an issue where WinPE created under Windows ARM64 26H1 did not work properly Download: Hasleo Disk Clone 5.8.2.1 | 32.3 MB (Freeware) Link: Hasleo Disk Clone Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      546
    2. 2
      +Edouard
      187
    3. 3
      Michael Scrip
      78
    4. 4
      PsYcHoKiLLa
      75
    5. 5
      neufuse
      71
  • Tell a friend

    Love Neowin? Tell a friend!