Recommended Posts

The session thing UAC does that ends up disabling Aero (Temporarily at least)

It's probably for security, stability, and performance.

The Secure desktop is supposed to be impenetrable. If you add the DWM, you're potentially adding an attack vector. As well, running the DWM on another desktop would add considerable resource usage and most likely making the transition even worse.

If you watch the task manager after startup, you can see the cached memory meter fill up, and free memory drop to zero within a few minutes. On my old laptop, this caused considerable slowness. On my new laptop, and on any other machine I've used, I've never noticed it causing any performance issues. (Which is kind of funny, because my old laptop had a faster hard drive than my new one). After that fills up, the excessive hard drive usage should stop.

Keep in mind that Vista is reading (in some cases) several gigabytes of data off of the harddrive as low priority, which means that it's going to be skipping around/relinquishing control to other apps which are also starting up. That takes more than a few seconds.

I've started using vista with superfetch turned off, it's made a hell of a difference.

the desktop appears roughly 2 seconds after the welcom text appears on screen, usually the welcome text stays on screen for roughly 30 seconds before the desktop shows up.

the hdd thrashing is gone, usually it thrashes for 2-3 mintues after the desktop shows up.

advantage, get to use my pc quickly, i know superfetch on or off has been discussed a lot, but its not really needed imo. the standard prefetching is enough, for 4 days I noticed no change in program load speeds. also disabling readyboost did not affect my boot time.

It's probably for security, stability, and performance.

The Secure desktop is supposed to be impenetrable. If you add the DWM, you're potentially adding an attack vector. As well, running the DWM on another desktop would add considerable resource usage and most likely making the transition even worse.

...

Yeah, but "meh"

I like UAC and I keep it enabled, I just hope MS streamlines it and makes it less annoying in Windows 7, maybe then people will stop disabling it for silly reasons.

Edit: I disabled the sidebar for a few reasons, mainly 99% of my time is spent in full-screen apps and I haven't found any widgets I like (I've found one for the Dashboard in OS X).

I disabled Dreamscene. It was cool at first, but then I noticed I never actually see much of my desktop while I'm using my computer. It's either completely blocked by games/movies, or I have so many windows up I can only see a sliver of desktop. So, in the interest of saving processor time, I went back to static image backgrounds.

I've started using vista with superfetch turned off, it's made a hell of a difference.

the desktop appears roughly 2 seconds after the welcom text appears on screen, usually the welcome text stays on screen for roughly 30 seconds before the desktop shows up.

the hdd thrashing is gone, usually it thrashes for 2-3 mintues after the desktop shows up.

advantage, get to use my pc quickly, i know superfetch on or off has been discussed a lot, but its not really needed imo. the standard prefetching is enough, for 4 days I noticed no change in program load speeds. also disabling readyboost did not affect my boot time.

Glad to see turning it off helped!

I have disabled nothing. I have never actually had any problems with Vista at all.

When I first built my PC in 2007 UAC bothered me but then I had allowed everything so it very rarely pops up now. I have upgraded the CPU since then to a Quad core and a bit more RAM making 3gb but apart from that the system hasnt changed.

Vista idles at 300mb or just over, cpu sits on 1%, hdd never gets thrashed or anything.

Maybe i was one of the lucky ones but i never saw the benefit to disabling anything as my PC ran perfect and never got and lag on opening anything or any games.

I have disabled nothing. I have never actually had any problems with Vista at all.

When I first built my PC in 2007 UAC bothered me but then I had allowed everything so it very rarely pops up now. I have upgraded the CPU since then to a Quad core and a bit more RAM making 3gb but apart from that the system hasnt changed.

Vista idles at 300mb or just over, cpu sits on 1%, hdd never gets thrashed or anything.

Maybe i was one of the lucky ones but i never saw the benefit to disabling anything as my PC ran perfect and never got and lag on opening anything or any games.

300MB?? That's impossible. With all the mentioned features disabled, Vista idles at 600-700MB (at least on my PC).

Edited by Hani

Windows Features I removed are.

Games,Print Services, Tablet Pc Optional Components, Meeting Spaces, Fax and Scan, Windows DFS.

For services.

Windows Search because it is useless for me, Windows Firewall,Defender cause it sucks,Security Center cause it sucks, UAC cause I do not need it, all Diagnostic Services cause they are useless. More but no time to list them all.

Disabling core system features of Vista (UAC, Superfetch, etc) is an absolute waste of your time, money, and machine.

UAC - If you do anything, on a regular basis that requires a prompt via UAC and you're a "Standard User", you're doing something wrong... seriously. Although, Microsoft does need to make it so that if you're an "Administrator", you shouldn't see any prompts. However, shame on those people that use an "Administrator" account on a regular basis...

SuperFetch - It's meant to increase application start times based on the users habits and most used applications. So all those people claiming Vista performed better with superFetch off under 1GB aren't properly testing the feature. You would need to setup a VM, and regularly perform certain tasks at specific intervals to properly give the SuperFetch AI room to work and then test the times. I would say a week of activity would be enough. Also, throwing in curve-balls would be acceptable too, but you should expect it to have a negative outcome.

Search Indexing - A little up in the air, but if you don't search that often, I would think you could spend some extra time and limit the indexing instead of disabling it. Vista caches HDD reads / writes to memory, so indexing on Vista is tremendously faster and a lot more efficient. You'll barely notice it if your HDD is a SATA 1.5gb/s 7200RPMs and higher.

Aero - Most of the "eye candy" is dependent on the GPU and VRAM, which you barely even use outside of playing a game. Guess what else, Vista automatically disables Aero when you're playing a game in full screen mode, so you don't get a performance hit because of it. The performance hit you see is a combination of the DX10 implementation and drivers. So, go ahead, disable Aero and let your video card waste 90% of it's life doing nothing.

ReadyBoost - A feature that will dramatically improve performance on machines with very little / slow memory provided you have the hardware. Regardless, this is a very situational feature, I can understand disabling it if needed.

System Protection - Another situational feature that I understand disabling. Some people are very meticulous in their back-ups already (like me)

UAC - If you do anything, on a regular basis that requires a prompt via UAC and you're a "Standard User", you're doing something wrong... seriously. Although, Microsoft does need to make it so that if you're an "Administrator", you shouldn't see any prompts. However, shame on those people that use an "Administrator" account on a regular basis...
If you use the actual Administrator account, then you don't get UAC prompts.

If you use user created administrator accounts, you get Admin Approval Mode prompts.

If you use a standard user account, you have to plug your password into the UAC box.

So Microsoft has already done that. The account is just disabled by default in order to prevent most people from using it. If people used it all the time, the security advantage over XP would shrink quite a bit.

ReadyBoost - A feature that will dramatically improve performance on machines with very little / slow memory provided you have the hardware. Regardless, this is a very situational feature, I can understand disabling it if needed.

Disabling the ReadyBoost service also disables ReadyBoot, a performance feature.

Disabling the ReadyBoost service also disables ReadyBoot, a performance feature.

Does some searching, what is ReadyBoot.

Hmmm, didn't know that. Always just assumed ReadyBoost was a useless service if don't use the thumb drives as more ram thing.

Turns ReadyBoost service back on.

I disable Search for the sole fact that i NEVER search and can't think of time that I have in the last 3+ years.

Other stuff I have tried on and off and don't really see a noticeable difference over the course of a month. I guess its just my user habits.

Have noticed a definite improvement in my bootup time now with ReadyBoot back on.

As you should. It does some fancy optimizations to try and make it so that the next time you reboot, it's faster.

I'm pretty sure that ReadyBoot helps out the most with more RAM, which makes it slightly ironic that it's housed in the same service as a feature designed to help out RAM limited PCs.

Unfortunately I still have to use Vista at and for work but at home I have disabled it altogether by wiping it off my primary machines. It doesn't make sense to run a slower os just to disable all of its "features". Might as well save the hassle and not use it at all.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I just looked on my computer and there are settings and log files for utilities I have never even turned on!
    • O&O ShutUp10 3.1.1104 by Razvan Serea O&O ShutUp10 offers a simple yet effective way to take control of your Windows privacy. It provides access to almost 50 privacy-related tweaks, most of them hidden or not easily accessible to the average computer users. Using a very simple interface, you decide how Windows 10/11 should respect your privacy by deciding which unwanted functions should be deactivated. Using ShutUp10 you can easily disable Windows Defender, turn off telemetry, disable peer-to-peer updates, turn off Wi-Fi Sense, disable automatic Windows updates, turn off and reset Cortana and more. ShutUp10 allows you to create a System Restore point before you apply any changes, so that you can revert your system at any time if you run into problems. O&O ShutUp10 is entirely free and does not have to be installed – it can be simply run directly and immediately on your PC. And it will not install or download retrospectively unwanted or unnecessary software, like so many other programs do these days! O&O ShutUp10 Free and Premium The latest version brings O&O ShutUp10 Premium, expanding the app’s long-standing privacy controls with automatic enforcement of user-defined settings. Instead of manually rechecking options after every Windows update, users can set their preferred privacy configuration once—or apply recommended settings in a single click—and the tool continuously monitors them in the background. If Windows 10 or 11 re-enables disabled features or introduces new data collection paths, Premium restores the chosen settings automatically without user intervention. The free version remains available and fully functional for manual adjustments, offering the same core privacy controls for Windows. However, the Premium tier is aimed at users who want long-term, hands-off protection, adding automatic reapplication after updates, ongoing monitoring, and optional notifications to ensure privacy settings remain consistent over time. O&O ShutUp10 3.1.1104 changelog: Added “Show Differences” button in the overview panel “Don’t show again” option for the restore point prompt Ctrl+F keyboard shortcut for search/filter functionality Detection and linking of system-wide and user-specific setting associations Automatic search while typing PREM: Option to preserve notification counters and timestamps across application restarts PREM: Reset blocked settings button in the Settings dialog PREM: Informational message when no settings are blocked PREM: Update check can also be triggered from the menu PREM: Notification deduplication and activity log summary feature Improved L005 “Disable Windows Location Service”: Version-specific split (up to Windows 11 23H2) and new variant for Windows 11 24H2+ L001 (Disable Location): Added Night Light warning to the description in all languages Search now detects setting IDs even when ID display is disabled and offers to enable it Detection and removal of Copilot/AI desktop apps in RecallTerminator Optimized High DPI support PREM: Reset button is now only enabled when blocked items exist – setting IDs are shown in the confirmation dialog PREM: Updated tray icons with higher-resolution versions PREM: Activity Log timestamps now use localized date and time formats PREM: Tray icon status now uses OK/Warning indicators and localized tooltips PREM: Recall folder detection switched to service-based detection PREM: Copilot uninstallation now provides UI feedback and improved verification Fixed Description text was not displayed correctly for the last item and disappeared when clicking the scrollbar Crash when clicking a search result heading or the […] button PREM: Installation path is now correctly preserved during upgrades PREM: Tray icon was not reliably removed when exiting the application PREM: Main window was not displayed correctly in single-instance mode PREM: Incorrect display of the & symbol in tray icon tooltips on Windows 10 PREM: Fixed notification flooding after sleep/standby PREM: Dashboard was not refreshed after applying recommended settings during onboarding PREM: Progress bar was not reset after deleting Recall folders PREM: Fixed service startup failures PREM: Fixed incorrect drift detection when Automatic Protection was disabled PREM: Notifications now correctly count all deviating settings when protection is enabled PREM: Registration Wizard was shown after sleep/standby despite a valid license Download: O&O ShutUp10 3.1.1104 | 76.4 MB (Freeware) Download: O&O ShutUp10 32-bit | ARM64 View: O&O ShutUp10 Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Fascinating...W h i t e P o w e r is now also asterisks out.  
    • In the past few days I have noticed two odd moderation activities. First, when I posted the term 'White Nationist Christian' it was asterisk's out. When I changed it to **** it was allowed! Second, in the Politics is a ###business thread I was allowed to post that the GOP is a party of p e d ophiles but I was censored  when I posted the GOP are a party of p e d ophile protectors. Wtf Neowin. Please explain.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      547
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Steven P.
      66
    5. 5
      ATLien_0
      64
  • Tell a friend

    Love Neowin? Tell a friend!