Recommended Posts

Got an Antec P182 from chconline, and installed my new E7200 and the Noctua NH-U12P that I got a few weeks ago.

Here are the pictures:

imgp2915ys4.jpg

Using the Corepad XXL that I also got from chconline.

imgp2916cf6.jpg

Interior, this case is A LOT better for cabling, still trying to figure out away to hide the SATA cable and the front panel connectors. Will probably be getting an SATA optical drive too to make those cables look better.

Managed to overclock it to 3.610GHz at 380FSB so it's a decent overclock. Don't really feel like pushing more voltage into the processor yet though.

First impressions of case:

Despite being a used case in what I would say as 9.5/10 condition. It's still pretty nice. Just from lifting it from the post office to my car I could tell it's pretty heavy, and the box was HUGE.

I liked how there were cable ties included as well as a lot of space behind the motherboard tray for me to route my cables.

Having a modular PSU definitely helps in this case.

Fans were quiet at lowest speed setting, and with the case cover on it was almost silent.

First impression of mouse pad:

Nothing really here, it was big and easily covers majority of my desk. Don't really like the bottom right hand corner (how it's rounded) but otherwise it's not bad.

Processor:

Seem to have hit an FSB wall at 380MHz, for various reasons (either my chip hit its limit, me not putting enough voltage, or my motherboard being the barrier). Perfectly happy with 8 hours ORTHOS small FFTs stable at 380FSB though.

Definitely a lot faster than my old Pentium D 805, and runs tons cooler as well; only 51C at load with 3.312v at load with vdroop. On my Pentium D I had to under volt to 1.1v just to get it to run at 40C idle. :p

3DMark2006 Score with Pentium D 805 @ 2.667GHz: ~4k

3DMark2006 Score with E7200 @ Stock: ~10k

Notice how heavily CPU reliant 3DMark06 is? That's another thread though. ;)

FPS difference in Bioshock using the built in benchmark: E7200 was about 20-30% faster. This is using DX9 seeing as how I'm running Windows XP 32bit. Noticed that I could run at higher resolutions without the game studdering at graphically intensive parts. However, my old processor wasn't as much of a bottleneck for my 9600GT as I had previously thought.

And for those of you wondering, I'm running a 9600GT Superclocked Edition (which is again further overclocked to 725/1798/1010)

A Corsair HX520 PSU

Intel Core 2 Duo E7200

and 2GB of OCZ Platinum Rev. 2 running at 1:1 with my CPU.

Edited by shift.
Link to comment
https://www.neowin.net/forum/topic/663408-new-heatsink-case/
Share on other sites

Nice, Shift. That looks bigger than the Ripper XXL. might be the angle though..

I had a non-modular psu, and it was hard to get it right.

The fans are quiet, but the Noctuas FTW!

Processor:[/i]

Seem to have hit an FSB wall at 380MHz, for various reasons (either my chip hit its limit, me not putting enough voltage, or my motherboard being the barrier). Perfectly happy with 8 hours ORTHOS small FFTs stable at 380FSB though.

It looks like you have a Gigabyte board and an E7200, which is what I have. For 3.8GHz, I use these voltages:

CPU: 1.368v (in Windows it drops to 1.32v idle, 1.3v load, may be different on your board. 1.3v minimum is about what you need for 3.8GHz usually, so you have to check the voltage during load, not just in the BIOS.)

Northbridge +.1v

RAM: whatever your RAM is rated for at 400MHz. 4GB needs more voltage than 2GB, and may need looser timings.

FSB +.1v helps sometimes.

Make sure Performance Enhancement is set to standard.

Also make sure your RAM isn't being overclocked if you are using DDR2 800 RAM. In general, don't use any of the "auto" timings or voltages in the BIOS.

Will try what toadeater said, but overclocking from 2.53GHz to 3.610GHz only gave me like 1k more points in 3dMark06 (which would probably mean even worse scaling in real gaming performance).

I'm at 1.312v at load, so yeah; I might need more voltage to be stable at 3.8GHz.

@ raider: Yeah I'm at about 37C at idle and 51C load with 1.328v idle, and 1.312 after vdroop at load.

Edited by shift.
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • As I've been usually saying lately - we all can thank "AI" for this.
    • Friday Windows 11 preview builds are here. Insiders in the Experimental (formerly Dev) and Beta Channel can download builds 26300.8697 and 26220.8690. My Windows11 device on the Preview Channel just got 26220.8728. My guess is this build is a nightly update from 26220.8690.
    • Traffic has a surprisingly unexpected impact on your surroundings by Sayan Sen Image by Radik 2707 via Pexels A collaborative study by researchers from several Israeli institutions found that everyday pollution from traffic and industrial activity measurably changed the atmospheric electric field over the Tel Aviv metropolitan area, providing new evidence of how human activity can influence the lower atmosphere. The research was led by Dr. Roy Yaniv of the Hebrew University of Jerusalem and the Gertner Institute at Sheba Medical Center, Dr. Assaf Hochman of the Fredy & Nadine Herrmann Institute of Earth Sciences at the Hebrew University, and Prof. Yoav Yair of Reichman University. The study also involved Itay Froomer, a student from Hadera High School and the Israeli Museum of Medicine and Science (Technoda), who carried out the work as part of the Ministry of Education's 5-unit physics research track. The researchers focused on the atmospheric electric field under fair-weather conditions. Even in the absence of storms, a weak electric field naturally exists between Earth's surface and the atmosphere. One of the main ways scientists measure this field is through the Potential Gradient (PG), which is the inverse of the vertical component of the electric field. PG is a key part of the global electric circuit, a planet-wide system of electrical currents maintained by thunderstorms and electrified clouds around the world. Scientists have long known that the atmospheric electric field can be influenced by factors ranging from large-scale atmospheric processes to local weather conditions such as dust, fog and clouds. Human-made pollution is also known to play a role, but understanding exactly how urban emissions affect the electric field close to the ground has remained an area of ongoing research. To investigate this relationship, the team analyzed measurements from a newly installed electric field mill, an instrument used to continuously monitor the strength of the atmospheric electric field. The instrument was installed at the Center for Technological Education (Roter House) in Holon and became operational in August 2024. It was funded by Israel's Ministry of Education and the Holon municipality. The electric field mill forms part of a broader monitoring network that includes nearby meteorological stations and air-quality monitoring sites. This allowed researchers to compare electric field measurements with detailed weather data and pollution records to better understand what was driving changes in the Potential Gradient. The study focused on two major urban pollutants: fine particulate matter (PM2.5) and nitrogen oxides (NOx), both commonly produced by vehicle traffic and industrial activity. PM2.5 refers to microscopic airborne particles small enough to remain suspended in the atmosphere for extended periods, while NOx is a group of gases released during fuel combustion. Researchers examined daily, weekly and seasonal patterns in the atmospheric electric field and compared them with changes in pollutant concentrations. Their analysis revealed a clear relationship between NOx levels and changes in the Potential Gradient, particularly during morning and evening rush hours when traffic emissions were at their highest. “What we observe is a direct physical link between emission peaks and electrical variability,” explained Dr. Roy Yaniv. “NOx reduces atmospheric conductivity very quickly, so the electric field responds almost instantaneously during traffic rush hours.” Atmospheric conductivity describes how easily electrical charges move through the air. According to the researchers, nitrogen oxides rapidly alter this conductivity, causing a near-immediate response in the electric field. PM2.5, however, was associated with a delayed response. The researchers attributed this difference to the particles' longer atmospheric residence time, meaning they remain in the atmosphere for longer periods, as well as their different microphysical interactions with surrounding air and atmospheric components. The study also identified a pronounced "weekend effect." In Israel, traffic volumes and some industrial activity decline significantly on Fridays and Saturdays. During these periods, concentrations of both NOx and PM2.5 dropped, and corresponding changes were observed in the atmospheric electric field. “The weekend signal demonstrates just how sensitive the electric field is to changes in human activity,” the researchers noted. “When emissions decline, the electrical environment adjusts at once, providing a high-resolution indicator of urban atmospheric conditions.” The findings showed that pollution levels can influence not only the chemical composition of the atmosphere but also its electrical properties. Researchers said the results strengthened the case for using atmospheric electricity as an additional tool for environmental monitoring, particularly in densely populated urban areas where anthropogenic, or human-caused, influences are most pronounced. The study also pointed to potential public health applications. By combining air-quality measurements with observations of atmospheric electricity, researchers said they could gain a more complete picture of how urban atmospheric conditions change over time. “Integrating air-quality data with electric-field measurements gives us a clearer picture of how the lower atmosphere evolves moment by moment,” the researchers added. “It’s a framework that can support both scientific insight and practical environmental decision-making.” Beyond the scientific findings, the project highlighted a collaboration between universities, public institutions and secondary education. Researchers said the work demonstrated how students could take part in real-world environmental research while contributing to studies of air quality, atmospheric processes and their potential effects on society. Source: Hebrew University, ScienceDirect This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing
    • We aren't even at the all-star game and Microsoft is talking about an update that will most likely be released during the World Series if not after. A lot can happen in the world between now and the 2026 World Series, including the 2026 FIFA Cup. Tell me about it again after the FIFA Cup is concluded. That should allow plenty of time to prepare for it.
    • Great, tell me when I have a "Bad Pool Caller" elsewhere not in Windoze.
  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      542
    2. 2
      +Edouard
      186
    3. 3
      Michael Scrip
      77
    4. 4
      PsYcHoKiLLa
      77
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!