Get 500GB on your PS3 with the Samsung M6


Recommended Posts

Exclusive: There's only one way to unlock 500GB of storage on your PlayStation 3 -- using the new Samsung Spinpoint M6. Here's how to install it in five easy steps.

206951-2.jpg

Is that measly 40GB hard drive keeping you from downloading all your favorite movies and games from the PlayStation Store? Here are five easy to follow steps to supercharge your PS3 to a whopping 500 gigs for all your downloading pleasures. Watch the video walkthrough to see how it's done.

Step #1:

Purchase the Samsung M6 500GB hard drive (widely available online for around $230). Important note: The M6 is the only 500GB internal hard drive that will fit into the PS3. Use the PS3's Backup function to transfer saves and other content to a USB drive.

Step #2:

Unplug the PS3 and ground yourself. Open the PS3's hard drive access port, located on the side of the unit, with your fingernail.

Step #3:

Carefully unscrew the blue screw using the correct screwdriver bit (Philips Precise) using gentle pressure, taking care not to strip the screw. Pull out the metal hinge, and slide the hard drive tray out.

Step #4:

Unscrew the four screws that attach the hard drive to the metal tray, and remove the old hard drive (place old drive in anti-static bag).

Step #5:

Attach the new Samsung 500GB hard drive to the tray, replacing the four screws from the previous step. Slide the hard drive tray back into the PS3 port, and snap the metal hinge back into place, then replace the blue screw. Close the access port, power up your PS3, and replace the date stored on your USB drive. Voila -- you're done! Enjoy your massive storage space.

206951-1.jpg

Video walkthrough @ Source: http://www.gamepro.com/article/features/20...harge-your-ps3/

First time 500GB has been attempted, good news, but ouch at the price for the drive!

How is this different from any other HDD installation?

It's not, but the Samsung M6 is the only 500GB drive that'll work for now supposedly.

Important note: The M6 is the only 500GB internal hard drive that will fit into the PS3
It is news worthy. Up till now, anything over 320GB (I believe) wouldn't work.

Have there been any 2.5" over 320GB at this point? This is the worlds first 2.5" 500GB.

As I said, Samsung creating the disc is impressive, a 2.5" fitting in the 2.5" slot of the PS3 is not, it's stating the obvious. I don't mind the word spreading on this HDD either, just hate how the article is written. Like they have some sorta' secret on how to unlock 500GB on the PS3 or tells us something nobody knew.

It has nothing to do with this being the first HDD at that size. You do realise that the bigger capacity HDD's physically won't fit in the PS3, right?

If you are telling me other 2.5" won't fit the 2.5" slot of the PS3, then I am willing to say sorry and correct my mistake.

If you are telling me 3.5" drives won't fit the 2.5" slot, you are stating the incredibly obvious.

Have there been any 2.5" over 320GB at this point? This is the worlds first 2.5" 500GB.

It's not

http://www.lambda-tek.com/componentshop/in...p;prodID=B99763

The first 500GB units that fit in the notebook industry standard 9.5mm height dimension are expected to hit the market next month and are produced by Samsung.

Hitachi also recently introduced the 500GB 2.5″ HDDs with a 12.5mm height.

The MHZ2 BT hard drives have a height of 12.5mm, which is not a standard dimension for 2.5-inch laptop hard drives.

Source: http://laptoping.com/fujitsu-mhz2-bt.html

Others exist, only the Samsung is 9.5mm but.

It has nothing to do with this being the first HDD at that size. You do realise that the bigger capacity HDD's physically won't fit in the PS3, right?

Yup, others exist, but none have fitted till now.

If you are telling me other 2.5" won't fit the 2.5" slot of the PS3, then I am willing to say sorry and correct my mistake.

If you are telling me 3.5" drives won't fit the 2.5" slot, you are stating the incredibly obvious.

That is exactly what I'm saying. I'm sure AB already knows you're sorry though.

Okay, this is the kinda news you'd expect to read in such an article. Hence why I think it's a crap article.

As I said above, my comments weren't targeted at you AB, I just hate these sensational articles with no information and stating something which on the surface, has been covered a million times. Had they actually said anything about the Hitachi drives and their physical hight 'problems' I could see the point of the article. But as it stands now, it's just an article on how to fit a 2.5" HDD which is even covered by the PS3 manual.

So I'm sorry to have thread crapped.

Okay, this is the kinda news you'd expect to read in such an article. Hence why I think it's a crap article.

As I said above, my comments weren't targeted at you AB, I just hate these sensational articles with no information and stating something which on the surface, has been covered a million times. Had they actually said anything about the Hitachi drives and their physical hight 'problems' I could see the point of the article. But as it stands now, it's just an article on how to fit a 2.5" HDD which is even covered by the PS3 manual.

So I'm sorry to have thread crapped.

It's fine :) but I did point out in post 3 that it was the only 500GB drive to fit the PS3, the article says that itself - I took a direct quote from it, therefore the article does explain the uniqueness of the Samsung M6 to the PS3

I guess had you known other 2.5" 500GB drives are out and have been for a while, you'd of clicked.

Anyway, back on topic, is anyone going to grab a 500GB? I still think the price is too high for now, in comparison to what a 320GB will cost you (either plenty of space for your PS3).

It's fine :) but I did point out in post 3 that it was the only 500GB drive to fit the PS3, the article says that itself - I took a direct quote from it, therefore the article does explain the uniqueness of the Samsung M6 to the PS3

I guess had you known other 2.5" 500GB drives are out and have been for a while, you'd of clicked.

I just searched for the Samsung M6 and everywhere it was being called "The worlds first 500GB 2.5", So I just assumed you guys were talking about ordinary HDD's or something else. :)

But as for my self, still using the 60GB and It's barely 20% full at this point. I'll probably wait a year or so before I consider upgrading, by then a 500GB should be at an affordable level.

Stay away from Pixmania!

They've been reported and features on television around here a number of times. Horrible service, extremely late delivery, broken goods and even not delivering at all even though they withdrew the money.

So unless they changed the last months, save yourself the trouble.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This looks awesome, I will request access via Steam later this afternoon!
    • Personally, I’ve found that it’s usually worth investing in the infrastructure you don’t want to replace later, especially cabling. Running Cat6A (or better, depending on your needs) during an upgrade is relatively inexpensive compared to having to re-cable a few years down the road. For switches I try to balance current specs with realistic growth. If my budget allows it Ill choose switches with higher uplink speeds which leaves room for expanding later on, but I don’t necessarily overspend on access ports if the endpoints won’t benefit from them anytime soon. One lesson I’ve learned is that planning for scalability pays off. It’s much easier to add devices, VLANs, or higher-bandwidth workloads when your network infrastructure already supports it than to replace hardware later.  What is your budget like?
    • I hate the term, "future-proof." We saw it back in the 90's / 2000's, if not before. You cannot future-proof anything, since there is no definition of how far into the future you plan on prepping for. Best idea is to tell us what you currently have and what its use is at the moment, and we can then offer ideas about some areas that might need an upgrade and other areas that can be left alone.
    • I can agree that it is being used in a small capacity. I worked for a company where their engineers still used XP, and when asked why it was because their sensor software wasn't compatible with newer operating systems and the software was discontinued so they couldn't upgrade the software. Given that the sensors were still in use by companies, they had to continue using XP to support the sensor, otherwise the price to the company would have gone into the millions or billions. Our response was simple: Ok, you can keep the XP machine. But we're removing it from the network. "But then it can't access the Internet or folder shares!" Yup, kinda the point. If someone wants to continue using an unsecure OS they can do, I have no problem with that. But it should be isolated. Simple. I had a fight with a guy in the engineering department for weeks before he finally relented. But we digress.   What do I plan on doing to commemorate the anniversary? Nothing. I have fond memories of the OS, but at the end of the day it's just an OS. If I had some time I might see if I could install it on my Raspberry Pi for a laugh. But my reflex memory with today's OS ideas would probably get me frustrated and I'd uninstall it after 5 mins.
    • Shutter Encoder 20.2 by Razvan Serea Shutter Encoder is one of the best video converter software and image, audio available today. It has been designed by video editors in order to be as accessible and efficient as possible. It is one of the few free professional tools. Based on FFmpeg, it has the largest codec library available. You can thus convert your files into many different formats. Complete settings for the most advanced Shutter Encoder has a panel containing a large number of settings, in order to define your own choices based on your files and perfect your video or audio output. Well-thought-out settings, with parameters predefined to create files quickly and easily. List of functions Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Extract, Subtitling, Video inserts Sound conversions: WAV, AIFF, FLAC, MP3, AAC, AC3, OPUS, OGG Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, GoPro CineForm, Uncompressed YUV Output codecs: H.264, H.265, VP9, AV1, OGV Broadcast codecs XDCAM HD422, AVC-Intra 100, XAVC, HAP....and much more. Shutter Encoder 20.2 changelog: Added "Intel Quick Sync" hardware acceleration for Linux Added 'Identify speakers' option for "Audio transcription" function Improved installer package Improved video player performance Improved timecode display with drop-frame videos Improved naming convention for surround audio files Fixed splash screen freeze Fixed bug with file hanging Fixed bugs with presets loading Fixed bugs with video player's buffer Fixed bug with 'Total length of file' option Fixed bugs with 'Record screen/device' option Fixed bug with "XAVC" & "XAVC Long GOP" functions Rollback to XPDF tool for PDF conversion Removed unused binary architecture for Mac Various corrections Various improvements Download: Shutter Encoder 20.2 | 166.0 MB (Open Source) Download: Shutter Encoder Portable | 185.0 MB Links: Shutter Encoder Home Page | FAQ / Tips | macOS | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      265
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      99
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!