Vista installed; I want to make another part and dual boot


Recommended Posts

Step one, get or make an Ubuntu CD.

Step two, make sure your PC's BIOS is set to boot CD first.

Step three, boot CD, and perform the install.

Step four, when it asks about making room, it will present a slider to 'make room' on your hard drive. Slide it to give about 10-20GB, or even more, depending on how generous you feel.

That's about it. It will install GRUB which will handle your dual-booting.

Step one, get or make an Ubuntu CD.

Step two, make sure your PC's BIOS is set to boot CD first.

Step three, boot CD, and perform the install.

Step four, when it asks about making room, it will present a slider to 'make room' on your hard drive. Slide it to give about 10-20GB, or even more, depending on how generous you feel.

That's about it. It will install GRUB which will handle your dual-booting.

Sounds too easy IMO.

If I later wish to remove Ubuntu and just boot with Windows, is it easy too?

The only complicated part would be restoring the Windows MBR, which is done by booting the Windows Vista CD.

If you are likely to remove, maybe a "wubi" install would make it so you dont need to partition. And install is a simple Windows "uninstall".

The only complicated part would be restoring the Windows MBR, which is done by booting the Windows Vista CD.

If you are likely to remove, maybe a "wubi" install would make it so you dont need to partition. And install is a simple Windows "uninstall".

wubi sounds like a good alternative. How do I do it?

wubi has NO limitations right? All I want to do is make my wificard work under Ubuntu and be able to download/install packages/drivers/software/etc....LiveCDs can't do that (all info is lost when I restart) and a VM is a bit crappy.

wubi is a real install.

It just uses a virtual filesystem (not a virtual machine, or install or such).

You boot, and select the wubi boot, and you are running Ubuntu indistinguishable from a "traditional" install.

wubi is a real install.

It just uses a virtual filesystem (not a virtual machine, or install or such).

You boot, and select the wubi boot, and you are running Ubuntu indistinguishable from a "traditional" install.

OK Thanks :)

52 minutes till I download Ubuntu 8.04.1

Well, a "traditional" install survives any removal of Windows partitions. A "wubi" install relies on the NTFS partition, because that is where the virtual filesystem is created.

For "just checking it out", wubi is probably the better choice. (Y)

Well, a "traditional" install survives any removal of Windows partitions. A "wubi" install relies on the NTFS partition, because that is where the virtual filesystem is created.

For "just checking it out", wubi is probably the better choice. (Y)

If I choose to, can I make this virtual partition larger/smaller afterwards?

Another thing

For what I want what would be the proper size, more or less? 10GB?

Woah I dont even have to boot....I can directly open wubi up in Computer and select it from there....

Im gonna go with 10GB. Here we go...

I could have done with mounting using Dameon Tools instead of burning a ISO right?

Pretty much everything is broken :( Now I have to go on a driver hunt.

Do you have a good install? What is working? What is broken?

Because the term "everything" is not very accurate.

welcome to Ubuntu
Oooh! Can I now go into Virus/spyware/adware threads and post "Welcome to Windows" now? Oh, that would be soooo funny, right? Hilarious! :sleep:

its an autocracy, so yeah you can if you want.

..

I really wanted this Ubuntu thing to work but if an OS cant be taken out of the box and installed successfully on a Virtual Machine without editing this file and that other file and... then to be honest I cant be bothered.

..

Im in IT and spend/spent way too much time doing this type of things, not a chance I will do the same at home.

Pity because I really liked how the interface looks/feels.

Ok. Sorry to hear you had problems setting it up in a virtual machine (MSVPC? It has known issues).

Well, thanks for your input to the thread, and (not) helping the poster out.

Bye.

yeah MSVPC.

so, maybe I should use VirtualBox ? Tried installing Windows XP Pro on it, my Windows 2008 GPOs are not pushed to the VM client.

sooo..I should use MSVPC for Microsoft clients and VirtualBox for *nix... ? yeah.. right.

in any case, my comment was 'welcome to Ubuntu'. you decided its interpretation.

i didnt know it was a private forum. apologies, I will go delete my account and then prolly set myself on fire as a tradeoff for 'spoiling' the thread.

..

gimme a shout when you get off the high horse.

Do you have a good install?

Yes

What is working?

Nothing like I said:

Wifi doesnt work properly (Intel 4965AGN)

Bluetooth doesnt work properly (Dell Wireless 360 Module)

Graphics card isnt support in advance mode (nVidia GeForce 8400M)

I dont know how to write/erase a CD-RW

Sound doesnt work properly (Its a Realtek)

Mouse/trackpad sorta work

Ethernet does not work (also a Realtek)

What is broken?

Everything mentioned above :p

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • draw.io Desktop 30.2.6 by Razvan Serea draw.io desktop is a downloadable security-first diagramming application that runs on Windows, MacOS and Linux. Creating diagrams in the desktop app doesn’t need an internet connection. This is useful when you are disconnected or when you must create diagrams in a highly secure environment, where data protection is of the utmost importance. When you use the draw.io desktop app, your diagrams will be stored on your local device. Because this is a stand-alone application, also designed to run offline, there are no interfaces to cloud storage platforms available. Of course, you can still store your diagrams in folders that are synchronised to your cloud storage if you wish. Easy-to-use diagram editor The draw.io apps work just like the office and drawing tools you are used to using. Drag and drop shapes from the shape libraries and drag to draw connectors between them. Drag connectors to add waypoints and set a precise shape and position, or let them reroute automatically. Double click and start typing to add a label to anything. Create tables and swimlane flows with a familiar tool. Style shapes and connectors with customisable palettes, sketch options, fonts and text formatting tools. Search for shapes, including in open-source icon libraries. Use our vast libraries of shapes and templates, organised into logical categories, to create a range of diagrams and infographics. Generate diagrams from text descriptions using our smart templates. Diagram faster with keyboard shortcuts. draw.io Desktop 30.2.6 changelog: Uses electron 42.5.0 #2452 Updates to draw.io core 30.2.6. Download: draw.io 64-bit | Standalone (Open Source) Download: draw.io 32-bit | ARM64 | ARM64 Standalone Links: draw.io Home Page | Project page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      209
    3. 3
      PsYcHoKiLLa
      146
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!