Vista tcpip.sys Auto Patcher v2.2


Recommended Posts

I'm getting "TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts" in my event viewer when I use bit torrent lately. I used the wrong vista tcpip auto patcher version and really screwed up my OS, I had to restore an image. Since I know what I did wrong I think I'll try again but use the correct auto patcher for my version of the tcpip.sys file.

Is there another way around this problem or what?

Link to comment
https://www.neowin.net/forum/topic/666548-vista-tcpipsys-auto-patcher-v22/
Share on other sites

Is there another way around this problem or what?
yeah correctly configure your BT client to not make so many half open connections!! A lower half open connection has no effect on your download speed.. But hitting the limit sure will.

the tcpip patcher doesn't work on Vista x64 very well. it's extremely hard to get it working properly, so if you have vista x64 then give up and just set your connections lower

if you on windows xp or vista 32-bit then there are plenty of guides out there

I run utorrent, and have my net.max_halfopen set to the default 8, and have never once had the 4226 error in the event log. I just double checked -- the log goes back to 2/11/08, not one 4226 error

And utorrent is running 24/7/365 -- normally download and seeding multiple items.

if you are getting these errors, you most likely have something else running at the same time as your bt client also creating half open connections.

if you don't believe us that its FUD, here is some more info

http://www.p2pforums.com/viewtopic.php?f=111&t=32557

TCP/IP.sys Half-open connection limit guide.

Do your own research you will find that anyone telling you to install some patch has not a freaking clue to what they are talking about - PERIOD!

Does the limit in anyway actually slow down what its suppose to slow down -- I highly doubt it.. 10 half open connections a second it a lot of connections! So that worm could still find lots of machines to infect.. but hopefully the slow down it will cause in the normal traffic would alert the user that something is clearly wrong, etc.

I would suggest you look to what else might be causing your 4226 errors. Grab your fav sniffer and take a look at what is being put on the wire.. But even if you managed to remove the 10 half open connections a second limit, you did not fix anything. And only managed to mask an underlaying issue with your system.

And what problem did it fix exactly? Do you have any idea why the limit is there in the first place or even what a half-open connection is?

it fixed my error in event viewer and my internet doesn't drop when I use utorrent. I read a couple weeks ago that the limit is there because of worms that use to run IRC and make multiple connections as hosts. I'm probably wrong, I just skimmed over what I read, and I don't know what a half-open connection is.

the tcpip patcher doesn't work on Vista x64 very well. it's extremely hard to get it working properly, so if you have vista x64 then give up and just set your connections lower

if you on windows xp or vista 32-bit then there are plenty of guides out there

you can see from my last post that I got it working, and it was very easy. I just ran the batch file that installed the patched tcpip.sys file and readydriver plus to automate the disabling of digital driver signature signing check. it took less then 2 minutes, i have a true image backup in case things go wrong.

I have no idea why people still believe this FUD. The patch does nothing!

read my last post.

I run utorrent, and have my net.max_halfopen set to the default 8, and have never once had the 4226 error in the event log. I just double checked -- the log goes back to 2/11/08, not one 4226 error

And utorrent is running 24/7/365 -- normally download and seeding multiple items.

if you are getting these errors, you most likely have something else running at the same time as your bt client also creating half open connections.

if you don't believe us that its FUD, here is some more info

http://www.p2pforums.com/viewtopic.php?f=111&t=32557

TCP/IP.sys Half-open connection limit guide.

Do your own research you will find that anyone telling you to install some patch has not a freaking clue to what they are talking about - PERIOD!

Does the limit in anyway actually slow down what its suppose to slow down -- I highly doubt it.. 10 half open connections a second it a lot of connections! So that worm could still find lots of machines to infect.. but hopefully the slow down it will cause in the normal traffic would alert the user that something is clearly wrong, etc.

I would suggest you look to what else might be causing your 4226 errors. Grab your fav sniffer and take a look at what is being put on the wire.. But even if you managed to remove the 10 half open connections a second limit, you did not fix anything. And only managed to mask an underlaying issue with your system.

I did some research, and its a common problem on vista as well as XP. I reformatted to see if I receive the error on a fresh install, and I did. So I ruled out a possible infection. I have suspicion that my onboard NIC is going bad, so that could be my underlaying cause.

I don't know what a half-open connection is.
Then it's quite clear you did not even make a half ass attempt at any research to what your issue really is.. Just as the rest of the lemmings out there following the FUD about the so called "patch" Who then pass on the nonsense to their buddy :rolleyes:

Did you even bother reading the info I linked to?

Then it's quite clear you did not even make a half ass attempt at any research to what your issue really is.. Just as the rest of the lemmings out there following the FUD about the so called "patch" Who then pass on the nonsense to their buddy :rolleyes:

Did you even bother reading the info I linked to?

I probably read what it is but I didn't remember. You could be right, or you could be wrong, it just depends what site you get your info on, if you google the problem theres a wealth of information. I could find 20 links that agree with you or 20 that don't. But I have nothing to prove, if my problem creeps back, then I have images to restore to. My PC is clean, with eset smart security 3.0, spybot, and windows defender so I'm not worried about a malware infection.

I probably read what it is but I didn't remember. You could be right, or you could be wrong, it just depends what site you get your info on, if you google the problem theres a wealth of information. I could find 20 links that agree with you or 20 that don't. But I have nothing to prove, if my problem creeps back, then I have images to restore to. My PC is clean, with eset smart security 3.0, spybot, and windows defender so I'm not worried about a malware infection.

Rest assured, in this area, if Budman says you're wrong...you're wrong.

I agree with you there are plenty of sites that promote the patch -- and I will state again, none of them have a clue to WTF they are talking about.. Heres a hint -- there is lots of FUD out there!!!

But it's common sense in understanding your not fixing anything -- why do you think you need to make more than 10 HALF OPEN connections a second?

Half open connections are connections that do not answer.. Your machine should not be trying to connect to IPs that do not answer.. When you try to make connections to IPs that do not answer faster than 10 a second, you end up filling up the queue, and now all new connections - even ones that would answer will be slower, since they have to wait their turn in the queue to be created..

This is really what would help find infections, not the limiting to 10 connections a second factor. Since if there are process(es) on your machine looking at random IPs (that do not answer) to infect -- it will fill up the queue, and you will NOTICE the slow down in your internet connection -- ie just browsing can be really slow when your queue is full.. You would then look into WHY this is happening and correct it from doing it -- not just hack it so you do not see the symptom of the problem anymore, like your doing.

If you want to see which process is doing this -- a simple quick easy way to verify that its your BT client doing it.. Then from a command line do a netstat -ano -- this will show you your connections that are half open. Ie they will be in the SYN_SENT state

You can create an example by trying to make a connection to an IP that you know will not answer..

In one command prompt I tried to telnet to this IP, that I know does not listen on telnet, From another command prompt I can see that it is in the half open state.

Active Connections

Proto Local Address Foreign Address State PID

TCP 10.40.0.4:1163 10.10.10.10:23 SYN_SENT 932

The 932 is the PID of the process trying to make the connection. You can then find this processing using your task manager or tasklist from the command line, or just doing a -b on netstat will give you the process name (but can be slow to finish)

If your BT client is in fact doing it, then lower the half open setting again.. Some people run it at 1, due to the fact they use other software at the same time that creates half open connections. This is in no way going to slow down downloads -- since half open connections are not helping you download anything anyway ;) It might just take a few extra seconds to make valid connections is all. If some other process is creating lots of half open connections -- look to why it would be doing that.

It could be your nic I guess -- if your connection attempts are not actually going out on the wire, or your not seeing the answer then your OS would think the connection is half open.. I tend to doubt that -- but sure it could happen I guess, if you have a faulty nic -- that does not put connection requests on the wire, or that does not see the answer.. Don't you think you should FIX THAT vs just masking the issue.

Hacking the stack to remove this limit is like pulling out the check engine light when it comes on vs looking to WHY it is coming on. Like I said before if you managed to remove the limit, you did NOT FIX ANYTHING you masked the issue from you noticing it -- just like pulling out the check engine light on your car cause you don't like it flashing at you ;)

You could be right, or you could be wrong, it just depends what site you get your info on, if you google the problem theres a wealth of information. I could find 20 links that agree with you or 20 that don't. But I have nothing to prove, if my problem creeps back, then I have images to restore to. My PC is clean, with eset smart security 3.0, spybot, and windows defender so I'm not worried about a malware infection.

What is that, Internet Logic? Here's one for you:

5 + 5 = 10 (citing Neowin.net, this post).

5 + 5 = 11 (citing Neowin.net, this post).

One of the above statements is clearly wrong, since they directly contradict each other. Reality does not depend on "what site you get your info on". Realize that you're experiencing a problem, and have addressed the symptoms because that involves double-clicking on some executable file that you downloaded off the Internet, as opposed to actually taking time to diagnose the cause of the issue.

Here's some more food for thought - if you're going to download and run some executable from the Internet without knowing exactly what it does, or why it is useful/not useful, then why exactly do you expect your security software to protect you from malware? Most malware infections these days aren't the fault of the software - they're the fault of the idiot with the admin password, sitting at the keyboard.

^ well said!

And I completely agree with this "fault of the idiot with the admin password, sitting at the keyboard."

But they do not always need the admin password to screw it up.. So you could shorten it to "Fault of the idiot sitting at the keyboard"

Or to really shorten it up -- "PEBKAC" ;)

While I agree that half-op[en connections shouldn't matter, I have had the same experiences as these guys. On multiple machines, Vista and XP. Even after a fresh install.

The patch does something. How else can it be explained that applying the patch fixes the slowdown issues so many users have while using BT?

I recently set up a new Vista box for a friend. The first thing they did was to start downloading a bunch of stuff using uTorrent. Not long after, the web browsing became very slow. The uTorrent D/L and U/L rates where appropriately capped and all other settings where set correctly. Did the TCP/IP patch and everything has been smooth since.

It DOES provide a benefit, albeit a small one, for a small period of time.

I used to use it on my XP system, but didn't bother after reformatting. I only notice BT is slow to get connections for the first minute or so, then it's established and running. I've repeated that behaviour a few times on various systems.

While I agree it does help, it's not really a good solution because of other reasons. (Refer to Budman's post/s)

  • 4 weeks later...
...

Half open connections are connections that do not answer.. Your machine should not be trying to connect to IPs that do not answer.. When you try to make connections to IPs that do not answer faster than 10 a second, you end up filling up the queue, and now all new connections - even ones that would answer will be slower, since they have to wait their turn in the queue to be created..

...

Thanks for clearing that up BudMan. I was just sitting here with the patch ready to go resting my finger on executing it. Well, it seems I have no reason to.

If I understand correctly then I should be able to lower my halfopen connections setting in Utorrent down to... 4? Because if a computer doesnt answer within 4 seconds when I am using a 100Mbit connection then I definately dont wont anything to do with that connection(?).

Anyone kno if Uttorrent recently change their setting for half open connections? Ive never had this problem before and just recently updated Utorrent.

Not sure where you came up with the doesn't answer in 4 seconds? Setting it to 4 does not mean that is how long it waits.

As to the comment "While I agree it does help" -- BS plain and simple.

edIt: @ "The patch does something. How else can it be explained that applying the patch fixes the slowdown issues so many users have while using BT?"

What part do you not understand about if you go over 10 half open connections a second your new connections have to get queued?????? Yes if you have hit the limit, ie a 4226 error -- then yes everything can become slow as Molasses.. Does not matter what you limited the upload/download or number of connections too.

As I thought I clearly went over, and the link I provided also goes over --- correct you application to not create so many freaking half open connections and you will never hit the error limit.. And you will not start queue up new connections.

How you set your bandwidth limits or max number of connections on your application has NOTHING to do with the number half open connections it might try to make. Utorrent defaults to 8, you can lower it if you have other applications running that might also create half open connections or that setting still puts you over the limit -- ie 4226 errors in the event log.. The latest version makes mention of something so it will never go over the half open limits -- the details I am not sure on yet.. But you can lower it to 1 if you need too.. It will not slow down your torrent speeds at all.

Edited by BudMan
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Thank you for the post. Just a FYI that links to an outside site or promoting specific software is considered spamming here. Asking general questions is fine.
    • I have been thinking about AI detector tools as a software workflow rather than a single "AI score" widget. When someone pastes text or uploads a document, the UI can return a report with a probability-style score, sentence highlights, reliability notes, and limitations. The useful part is that it can point a reviewer toward passages worth reading again. The risky part is that a polished score can look more certain than it really is. For people who build or review web apps, what should happen before the user copies or exports that kind of report? The minimum I would expect is: A clear input boundary for pasted text versus document files. Limits shown near the workflow, including minimum text length and maximum file size. A report label that says the result is a signal, not proof of who wrote the text. Sentence highlights and evidence notes alongside the global score. Reliability notes when the sample is too short or lacks enough sentence variety. False-positive and false-negative caveats that remain visible in copied/exported summaries. I am trying to avoid the pattern where a clean report card becomes the whole product story. For AI detection, "review this evidence in context" seems more honest than "trust this score." Would you keep the warning text visible on every report, or make it collapsible so the main result stays easier to scan? Disclosure: I work on a small AI detector/reporting workflow, but I am intentionally not linking it here. I am asking about software and report design, not promoting a site.
    • Build your own business with a Sellful lifetime plan now at 76% off by Steven Parker Today's deal from our Apps + Software section of the Neowin Deals store, lets you save 76% off Sellful: ERP Agency Plan lifetime deal. AI-Powered Software and Website Builder for Agencies Ever feel like a client’s needs simply can’t be met on a single platform? With Sellful, it’s all here, and all white labeled. Build anything from simple websites to complex workflows to automate your business in a few clicks. Manage everything from email & social media marketing, to payroll & invoicing. It’s got a white label website builder, online shop, CRM, ERP, marketing, memberships, invoicing, appointments, online courses, project manager, and point of sale functions. Sellful is the only white label platform in the world that is truly all in one, combining all aspects of your business in one place no matter the industry. What can you do with Sellful? Automatically generate amazing websites, funnels, & landing pages in seconds using AI Sell physical & digital products online Keep track of customers with native CRM Automate communication & outreach using AI Manage all aspects of your business in one place Collect emails & phone numbers via forms on your website, then send newsletters to customers with important updates, sales, and discounts Build membership programs with various levels of access for your customers Receive payments from your clients using any number of payment gateways including Paypal, Stripe, Authorize.net, Square & more Have your clients book appointments for services & meetings quickly Build powerful & robust online courses to sell to or instruct people Build communities on Sellful social networking sites with activity feeds, private messaging, & groups See & adjust a visual version of everything going on within your client projects Sync your online shop’s inventory with multiple offline store locations & registers Manage inventory, coupons, & sales through Sellful’s native POS app on your computer Manage employee recruitment, time clocks, payroll & leave requests Automate help desk tasks such as support ticket creation Communicate with your team on multiple chat channels Keep an accounting of your income & expenses Automate billing & website creation for your marketing agency What's in the ERP Agency Plan: White Label Unlimited 10 Sites/Sub Accounts Included 100% White Label For Your Brand Or Your Client's Brand Website Builder Sales Funnel Builder Online Shop Automation Builder CRM & Pipeline Management Email Marketing SMS Marketing Reputation Management 2 Way Communication (Email, SMS & Phone) Appointment Scheduler Memberships Subscriptions Forms, Surveys & Polls Client Portal AI Assistant & Chatbot Social Media Automation Legally Binding Contract Signing Project Management System Online Courses (LMS) Invoicing External CRM Connect Class Attendance & Event Booking Restaurant Builder Support Ticket System Team Chat AliExpress Drop Shipping Accounting Advanced Affiliate Program Community Builder Point Of Sale HR Suite (HR, Time Clock, Payroll & ATS) 5000+ App Integrations 20+ Payment Gateways (No Fees From Us) Custom Mobile App Agency Billing System Setup Wizard Builder Content Cloner Tool Digital Marketing Courses Actionable Marketing PDF Guides Unlimited Contacts Per Site/Sub Account Unlimited Pages Per Site/Sub Account Unlimited Blog Posts Per Site/Sub Account Unlimited Users Per Site/Sub Account Unlimited Products Per Site/Sub Account Unlimited Visitors Per Site/Sub Account 100 Gigs Of File Storage 50,000 Free Email Sends* Unlimited Domain Names Per Site/Sub Account *Email sending can be purchased in packs of 10,000 for $10/Month. You can also add your own external sending service to send without limits. Email sends are shared in a pool throughout all websites and email addresses on the account. System emails are always free. Good to know Length of access: lifetime Redemption deadline: redeem your code within 30 days of purchase Updates included Sellful: ERP Agency Plan (Lifetime) normally costs $1,497 but it can be yours for only $349.97, that's a saving of $1,147.03 (76%) off! For terms, and more details click the link below. Get a lifetime plan to Sellful at 76% off (was $1,497) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
  • Recent Achievements

    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      507
    2. 2
      +Edouard
      181
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!