• 0

[C#] Problem with double-click on ListBox item


Question

Hi there,

I have a ListBox with a few items and at sometimes, when the ListBox only has a couple of items, you'll see a blank area after the last item because there are no more items to fill the ListBox.

Now, I've implemented the MouseDoubleClick event to get the index of the double-clicked item in the ListBox like this:

private void listNotes_MouseDoubleClick(object sender, MouseEventArgs e) {
	int noteIndex = listNotes.IndexFromPoint(e.Location);

	// DO SOMETHING ELSE...
}

However, if I double-click on that blank area, noteIndex will have the index value of the last item on the list.

I need to ignore this behavior. Any suggestions?

21 answers to this question

Recommended Posts

  • 0

You are right about something, SelectedIndex is much simpler. I don't know why I didn't use it in the first place... However, it does not solve the problem.

Double-clicking the blank area will return the index from the last item in the ListBox. Forget for a minute about the double-clicking, because that's not probably the problem. Let's say that event is not implemented, when you single-click any item in the ListBox, that item will be selected, but if you single-click on the blank area below the last item, that last item will be selected.

Conclusion, the last item is being selected when I click on the blank area, that's what I want to avoid...

  • 0
  Nazgulled said:
You are right about something, SelectedIndex is much simpler. I don't know why I didn't use it in the first place... However, it does not solve the problem.

Double-clicking the blank area will return the index from the last item in the ListBox. Forget for a minute about the double-clicking, because that's not probably the problem. Let's say that event is not implemented, when you single-click any item in the ListBox, that item will be selected, but if you single-click on the blank area below the last item, that last item will be selected.

Conclusion, the last item is being selected when I click on the blank area, that's what I want to avoid...

If I click the blank region in a listbox the last item is not selected and the selectedIndex returns -1. If there is a item selected from a previous single click then that selected index will be returned because it is the item selected, and the double click is based on clicking the listbox.

ways around would be to clear the Selected Items before you get the selectedIndex. make a copy of them before, and then re-assign them after you get the selectedIndex from the mouseClick.

That way, no interference from other events should be a problem.

  • 0

I don't understand what you are saying.

I cleared the selected items, clicked the blank area and the last item was selected...

One thing I haven't told you and maybe that's where is the problem... I'm using the KryptonListBox from the Krypton Toolkit, not the ListBox from Windows Forms. Maybe I should post this on the Krypton forums...

Thanks for all your help :)

  • 0
  Nazgulled said:
I don't understand what you are saying.

I cleared the selected items, clicked the blank area and the last item was selected...

One thing I haven't told you and maybe that's where is the problem... I'm using the KryptonListBox from the Krypton Toolkit, not the ListBox from Windows Forms. Maybe I should post this on the Krypton forums...

Thanks for all your help :)

From what I understand, you were saying that clicking a the blank area in the Listbox selects the last item. I can't recreate this behaviour using the 2008 Windows Forms version. Whether the Krypton one adds this is something to investigate.

The main problem I understand is that the double click event works, just that other event handlers and functions are getting in the way, such as single click, ect. To rectify this the only way I can think of would be to save the state of the object before the click, then clear down all selected properties, and just look at the one from the MouseEventArgs.

Then you can copy the data back in. That way, any items selected before the double click will be ignored. Of course this is catering for a very small number of possibilities..

  • 0

I don't really know what to say...

Please take a look at the attached solution. It's a very simple C# app with just the KryptonListBox. Open it, press F5 and click on the blank area. You'll see the last item getting selected...

WindowsFormsApplication1.zipFetching info...

  • 0
  Nazgulled said:
I don't really know what to say...

Please take a look at the attached solution. It's a very simple C# app with just the KryptonListBox. Open it, press F5 and click on the blank area. You'll see the last item getting selected...

Not played with C# for a while, but wouldn't you be able to hook into the ondoubleclick event on the items themselves, thus avoiding this issue?

  • 0
  DaveLegg said:
Not played with C# for a while, but wouldn't you be able to hook into the ondoubleclick event on the items themselves, thus avoiding this issue?

I tried to do this earlier but I don't its possible in C#. Played with the attached solution as well and can't really get anywhere with it.

  • 0

Oh its an custom made listbox. I played with it and the same happens so I changed "SelectionMode" to None and it works... and it doesnt. MouseDoubleClick event doesnt work only SelectedIndexChanged. I guess the creator of the control left some things out.

  • 0

I'm not sure what exactly is going on, but I tried a simple project with a listbox, a few items and subscribed to the MouseDoubleClick event, and this worked fine;

MessageBox.Show(listBox1.IndexFromPoint(e.Location).ToString());

Which is what you were using earlier, and it works on my machine. Regardless of previously selected items, if you double click in the extra space in the listbox (the area not occupied by a list item), it successfully returns -1 :s

  • 0

The author of Krypton Toolkit answered me with this:

  "Phil Wright" said:
I think the difference in behavior is because the Krypton list box is owner drawn and your standard one is not. But you can use code to work out the answer. Compare the returned item with the display rectangle of that item to ensure it really is under the mouse...

		private void kryptonListBox1_MouseDoubleClick(object sender, MouseEventArgs e)
		{
			int noteIndex = kryptonListBox1.IndexFromPoint(e.Location);
			if ((noteIndex >= 0) && (!kryptonListBox1.GetItemRectangle(noteIndex).Contains(e.Location)))
				noteIndex = -1;
		}

That would work for the MouseDoubleClick but I also have some buttons that perform actions on the selected listbox item. A single mouse click on the blank area also selects the last item. I also need to ignore this behavior... I've been trying a couple of things around the code above but haven't managed to do so, any ideas?

  • 0

I can override some if I created a class based on KryptonListBox, actually, already tried this but couldn't find a method that would help me with this problem, or I'm seeing how could I use that method to work around the problem...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft 365 Word gets SharePoint eSignature, now you can ditch third-party signing tools by Paul Hill Microsoft has just announced that it will be rolling out an extremely convenient feature for Microsoft 365 customers who use Word throughout this year. The Redmond giant said that you’ll now be able to use SharePoint’s native eSignature service directly in Microsoft Word. The new feature allows customers to request electronic signatures without converting the documents to a PDF or leaving the Word interface, significantly speeding up workflows. Microsoft’s integration of eSignatures also allows you to create eSignature templates which will speed up document approvals, eliminate physical signing steps, and help with compliance and security in the Microsoft 365 environment. This change has the potential to significantly improve the quality-of-life for those in work finding themselves adding lots of signatures to documents as they will no longer have to export PDFs from Word and apply the signature outside of Word. It’s also key to point out that this feature is integrated natively and is not an extension. The move is quite clever from Microsoft, if businesses were using third-party tools to sign their documents, they would no longer need to use these as it’s easier to do it in Word. Not only does it reduce reliance on other tools, it also makes Microsoft’s products more competitive against other office suites such as Google Workspace. Streamlined, secure, and compliant The new eSignature feature is tightly integrated into Word. It lets you insert signature fields seamlessly into documents and request other people’s signatures, all while remaining in Word. The eSignature feature can be accessed in Word by going to the Insert ribbon. When you send a signature request to someone from Word, the recipient will get an automatically generated PDF copy of the Word document to sign. The signed PDF will then be kept in the same SharePoint location as the original Word file. To ensure end-to-end security and compliance, the document never leaves the Microsoft 365 trust boundary. For anyone with a repetitive signing process, this integration allows you to turn Word documents into eSignature templates so they can be reused. Another feature that Microsoft has built in is audit trail and notifications. Both the senders and signers will get email notifications throughout the entire signing process. Additionally, you can view the activity history (audit trail) in the signed PDF to check who signed it and when. Finally, Microsoft said that administrators will be able to control how the feature is used in Word throughout the organization. They can decide to enable it for specific users via an Office group policy or limit it to particular SharePoint sites. The company said that SharePoint eSignature also lets admins log activities in the Purview Audit log. A key security measure included by Microsoft, which was mentioned above, was the Microsoft 365 trust boundary. By keeping documents in this boundary, Microsoft ensures that all organizations can use this feature without worry. The inclusion of automatic PDF creation is all a huge benefit to users as it will cut out the step of manual PDF creation. While creating a PDF isn’t complicated, it can be time consuming. The eSignature feature looks like a win-win-win for organizations that rely on digital signatures. Not only does it speed things along and remain secure, but it’s also packed with features like tracking, making it really useful and comprehensive. When and how your organization gets it SharePoint eSignature has started rolling out to Word on the M365 Beta and Current Channels in the United States, Canada, the United Kingdom, Europe, and Australia-Pacific. This phase of the rollout is expected to be completed by early July. People in the rest of the world will also be gaining this time-saving feature but it will not reach everyone right away, though Microsoft promises to reach everybody by the end of the year. To use the feature, it will need to be enabled by administrators. If you’re an admin who needs to enable this, just go to the M365 Admin Center and enable SharePoint eSignature, ensuring the Word checkbox is selected. Once the service is enabled, apply the “Allow the use of SharePoint eSignature for Microsoft Word” policy. The policy can be enabled via Intune, Group Policy manager, or the Cloud Policy service for Microsoft 365 Assuming the admins have given permission to use the feature, users will be able to access SharePoint eSignatures on Word Desktop using the Microsoft 365 Current Channel or Beta Channel. The main caveats include that the rollout is phased, so you might not get it right away, and it requires IT admins to enable the feature - in which case, it may never get enabled at all. Overall, this feature stands to benefit users who sign documents a lot as it can save huge amounts of time cumulatively. It’s also good for Microsoft who increase organizations’ dependence on Word.
    • It's always good to have an option to secure your stuff to another medium. I did that with DVD/CD collection, and run my own media server now. It's more convenient that way and no need for separate players anymore.
    • Google Search AI Mode gets support for data visualization and custom charts by Aditya Tiwari Google announced it is rolling out support for data visualizations and graphs for finance-related queries in Google Search's AI Mode. Introduced last month at the Google I/O 2025 keynote, the feature lets you analyze complex datasets and create custom charts simply using natural language prompts. The updated AI Mode lets you compare and analyze information over a specific period, Google explained. It generates interactive graphs and provides a comprehensive explanation for your questions. AI Mode utilizes Gemini's multimodal capabilities and multi-step reasoning approach to comprehend the question's intent while accessing historical and real-time information relevant to the question. For instance, instead of manually researching individual companies and their stock prices, you can use AI Mode to compare the stock performance of different companies for a specific year. Once the graph is generated, you can choose the desired time period using the mouse cursor and ask follow-up questions based on the data presented. These new data visualizations for finance queries are available to users who have enabled the AI Mode experiment in Labs. AI Mode was introduced earlier this year as an experimental feature in the US. The feature is an upgraded version of AI Overviews, and Google closely worked with AI power users through the initial development process. It uses the “query fan-out” technique to perform multiple related searches across subtopics and different data sources, then combines them to come up with a comprehensive response. Google updated AI Mode last month to use a custom version of the latest Gemini 2.5 model. It added several new features, including Deep Search, live capabilities, agentic capabilities of Project Mariner, a new shopping experience, and the ability to add personal context by linking Google apps. The search giant is planning to turn AI Mode into its bread and butter. It has begun testing ads for the feature, which will appear below and be integrated into AI Mode responses where relevant.
    • Guys, you should find another way to promote your deals... It's the third article in the last months that promote this deal for an upgrade from 10. Considering that upgrade from 10 to 11 is free it's a total non-sense.
    • Store should be a shrine of useful applications, vetted and verified. Easily sorted by publisher. Windows should start with not much installed and have things as options in the store. Not the wild west mess that it is. You could delete 95%+ of the crap on there and no one would notice. They need to add a better UI to the updates, it's awful right now.
  • Recent Achievements

    • Week One Done
      luxoxfurniture earned a badge
      Week One Done
    • First Post
      Uranus_enjoyer earned a badge
      First Post
    • Week One Done
      Uranus_enjoyer earned a badge
      Week One Done
    • Week One Done
      jfam earned a badge
      Week One Done
    • First Post
      survivor303 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      432
    2. 2
      +FloatingFatMan
      239
    3. 3
      snowy owl
      213
    4. 4
      ATLien_0
      211
    5. 5
      Xenon
      157
  • Tell a friend

    Love Neowin? Tell a friend!