• 0

Time Sheet Online


Question

Hi All,

After some thought, I've decided to take the Time Sheet project that I've been working on to the online arena. This new project includes many of the features found within the Time Sheet desktop application. The features the online version includes are:

- The ability to record time and allocate it to a job

- The ability to generate invoices

- The ability to email invoices directly to your client from within Time Sheet

I'd really appreciate any feedback that anyone may have on this online version of Time Sheet. Feel free to try it out by visiting this page and logging in using the user name and password 'demo'.

One known issue is that it doesn't work properly in IE6, and I still haven't decided on the best font to use for the interface yet (it defaults to Gill Sans MT and falls back to Arial when this font can't be found).

Again, any feedback is greatly appreciated. :D

As always, thanks in advance,

Steven

Link to comment
https://www.neowin.net/forum/topic/679418-time-sheet-online/
Share on other sites

Recommended Posts

  • 0
Hi,

Doesn't work for me, however you do warn me that it won't on the main page when you state it needs "JavaScript" to work ;)

Yeah, it uses JavaScript to provide an AJAX powered interface (what with the timer and all :)). Did you give it a try? :)

It worked for me but the design is not that great. Maybe smaller Icons would look better.

Thanks for the feedback. Anything else in the design besides the icons you feel could be improved on?

Steven

  • 0
Yeah, it uses JavaScript to provide an AJAX powered interface (what with the timer and all :)). Did you give it a try? :)

Thanks for the feedback. Anything else in the design besides the icons you feel could be improved on?

Steven

Ye, functionality seems fine... just hate browsing the net with JavaScript on :p

  • 0
Yeah, it uses JavaScript to provide an AJAX powered interface (what with the timer and all :)). Did you give it a try? :)

Thanks for the feedback. Anything else in the design besides the icons you feel could be improved on?

Steven

No that is about it. Just be security conscious.

  • 0
No that is about it. Just be security conscious.

Thanks for the feedback.

Any further feedback on this service? In terms of features offered and functionality, (when released) what would you think of a $20 a year fee to use it?

Thanks,

Steven

  • 0
Thanks for the feedback.

Any further feedback on this service? In terms of features offered and functionality, (when released) what would you think of a $20 a year fee to use it?

Thanks,

Steven

I thought that you were doing this for your own use for your own company. There are l corporations that do this exclusively. I don't believe that you will be able to compete with them.

  • 0
I thought that you were doing this for your own use for your own company. There are l corporations that do this exclusively. I don't believe that you will be able to compete with them.

How so? Are there features this service is lacking? What do you believe makes this service incapable of competing with others?

Steven

  • 0
How so? Are there features this service is lacking? What do you believe makes this service incapable of competing with others?

Steven

The fact that these corporations have thousands of employees all over the country. You may be able to compete at a small scale such as in your area. But these corporations not only do what your program does they also do the payroll and W-2's etc, they do the entire payroll of companies. A great many companies have outsourced this type of work.

  • 0

You should have it autosave every few minutes, incase the browser crashes or something. I closed the tab after two minutes, so maybe it does after a longer period of time, but just an idea, should the browser crash, power goes out or something. Updates the time to the serverLooks good other wise though

  • 0
You should have it autosave every few minutes, incase the browser crashes or something. I closed the tab after two minutes, so maybe it does after a longer period of time, but just an idea, should the browser crash, power goes out or something. Updates the time to the serverLooks good other wise though

That sounds like a great idea. :) It should be easy to implement; I'll look into it. :) Thanks for the feedback.

Steven

  • 0

Hi All,

I've updated Time Sheet Online, taking into account what you guys, as well as others, have suggested. I'd love to know what you think of the updates. The URL and demo account user name and password are in the first post.

Thanks,

Steven

  • 0
Not really, maybe apply dynamic style sheets so that user can alter look & feel? Not keen on the standard style myself, not sure why though, just doesn't appeal to me. *shrugs* Personal taste... I know.

Sounds like a great idea; I'll look into it. :)

Steven

  • 0

Here are a few things I've spotted - I only played with it for a few minutes, so I may have looked over some important areas.

  • Invoices would be great if they could export directly to PDF.
  • If you're looking to sell this to businesses, you'll need to have the ability to export any and all data to quickbooks.
  • Have the ability to add tasks/time individually (not using the 'record' feature). From personal experience, I may forget/not have a chance to start/stop/pause a project if something else comes up, and would need to enter hours manually.
  • Give the option to automatically round numbers to nearest quarter-hour/half-hour. Many company's have a MINIMUM number of time increments to bill by (If I do 27 minutes of work - its automatically bumped to 30 minutes).
  • Reduce the size of the header - it's too tall.
  • Let the pages "run" (don't have a scrollbar inside the page). If i would use this, I would probably make it a very small browser window on the side of my screen - if that's the case, i would have multiple scrollbars (inside page and outside vertical...pain to scroll).
  • I don't think that "stopping" the timer should clear it as well. I think the buttons should be "play", "stop", and "clear". Would be nice to have the option for multiple timer's at once. (Often I'll be 20 minutes into 1 job, and then need to take a phone call that puts me 10 minutes into a different hob).

Hope that helps!

  • 0
Here are a few things I've spotted - I only played with it for a few minutes, so I may have looked over some important areas.

  • Invoices would be great if they could export directly to PDF.
  • If you're looking to sell this to businesses, you'll need to have the ability to export any and all data to quickbooks.
  • Have the ability to add tasks/time individually (not using the 'record' feature). From personal experience, I may forget/not have a chance to start/stop/pause a project if something else comes up, and would need to enter hours manually.
  • Give the option to automatically round numbers to nearest quarter-hour/half-hour. Many company's have a MINIMUM number of time increments to bill by (If I do 27 minutes of work - its automatically bumped to 30 minutes).
  • Reduce the size of the header - it's too tall.
  • Let the pages "run" (don't have a scrollbar inside the page). If i would use this, I would probably make it a very small browser window on the side of my screen - if that's the case, i would have multiple scrollbars (inside page and outside vertical...pain to scroll).
  • I don't think that "stopping" the timer should clear it as well. I think the buttons should be "play", "stop", and "clear". Would be nice to have the option for multiple timer's at once. (Often I'll be 20 minutes into 1 job, and then need to take a phone call that puts me 10 minutes into a different hob).

Hope that helps!

Thank you so much for the feedback! I really do appreciate it, and I really like some the suggestions. The rounding of time is already taken into account; in the invoices, it rounds time to the nearest 15 minutes. I'll work on making this more dynamic though. :) If you want to go in the draw to win a one-year license, complete the survey at the link mentioned above, but in the comments field, just mention your Neowin user name and that you gave feedback on Neowin. :D

since we are helping you with it, we should get free accounts :p

since we are helping you with it, we should get free accounts :p

Have you looked at the survey above? I'm giving out five one year licenses to those who complete the survey. :)

Thanks again for the feedback - I really appreciate it!

Steven

  • 0

I've now updated Time Sheet Online, taking into account many of the suggestions posted on this forum. I'd appreciate any feedback on the changes made, and would appreciate it if you could complete the survey (the link to the survey can be found when you log in). The user name and password are both demo.

You can view the demo at the link specified in the first post, or you can go here. I am in the process of setting up an SSL certificate on the website, too - this should take effect soon. :)

Thanks in advance,

Steven

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
    • Normally, I admit when a title is clickbait (unfortunately, it's become somewhat necessary to compete against AI-dominated news sections today), but in this case, all supported versions is implied and doesn't need to be spelled out in the title. Of course, I'm covering a Patch Tuesday update bug that is only available to supported Windows SKUs. All our coverage relates to supported Windows software and SKUs only unless we expressly state that it's "unsupported", "unofficial", or "third-party". I'm sorry, but supported/official SKUs don't need to be spelled out as such in every Neowin headline.
    • ALL versions or ALL SUPPORTED versions? Neowin does it again.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      595
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      77
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!