Patriot SSD 64GB Review


Recommended Posts

SSDs right now are not great for anyone. The price/performence is just not worth it.

Also, the brands are not the same; Seagate/WD rule in the magnet deparment while it seems Patriot rules in the flash deparment.

Its gonna be a few years (Id even say 5) until SSD drives become standard (not to mention the size limitations right now)

SSDs right now are not great for anyone. The price/performence is just not worth it.

Also, the brands are not the same; Seagate/WD rule in the magnet deparment while it seems Patriot rules in the flash deparment.

Its gonna be a few years (Id even say 5) until SSD drives become standard (not to mention the size limitations right now)

Size isn't much of a problem for me to be honest. I have a Data hard drive which keeps all the files I use. My current RAID-0 array is my Operating System only.

Found some wierd stuff out, I formatted the SSD's in 4KB allocation units (not even what is recomended!) instead of 512byte and a lot of the lock ups went away... go figure... but ontop of that I did lose about 10% of the read speed, and write speed went down to a little below what the 2 HDD's in RAID0 was

? Sequential Reading ? 157.0 MB/ps

? Sequential Writing ? 68.20 MB/ps

? Random 512KB Reading ? 137.90 MB/ps

? Random 512KB Writing ? 35.90 MB/ps

? Random 4KB Reading - 14.71 MB/ps

? Random 4KB Writing ? 1.81 MB/ps

when you say MB/ps is that for pico seconds? cause that's really fast... if it's for per second then then you don't need the " / " sign per means divide in this case....

Sorry I am a nerd and these things catch my eye.

when you say MB/ps is that for pico seconds? cause that's really fast... if it's for per second then then you don't need the " / " sign per means divide in this case....

Sorry I am a nerd and these things catch my eye.

That's an average of sustained speeds

  • 2 weeks later...
Found some wierd stuff out, I formatted the SSD's in 4KB allocation units (not even what is recomended!) instead of 512byte and a lot of the lock ups went away... go figure... but ontop of that I did lose about 10% of the read speed, and write speed went down to a little below what the 2 HDD's in RAID0 was

Do you think the OCZ V2 SSD's would work like the Patriot SSD's if I used a RAID controller with onboard memory?

That's an average of sustained speeds

Hey I loved your review, it actually sealed my purchase on two of these, couldn't pass up the price.

I have them running in raid 0 right now and they are very fast, however I'm only getting like 160MB/s read. Is it because I didn't use the same stripe size as you did? Would changing the stripe size allow me to reach up to the same read speeds you were getting? Also I didn't specify any particular format size either. Currently I haven't noticed any studdering, which was the only thing I was worried about before getting them. Have you tried multiple formats and stripe sizes, and found the best one? Sorry for the bombardment of questions, but any input would be greatly appreciated!

  • 3 weeks later...

Excellent review, in-depth and informative. I was waiting for a real person to deliver some test results along a review for the new SSD's. Once SSD fixes it's little quirks and expands to 1TB or larger, then I'll make the switch.

Although, having a dedicated SSD solely for virtual memory would be very interesting to test...

  • 1 month later...

I got this thing!

~ 120MB/S Read

~ 0.3 Ms seek

But, it does get stuck sometimes. Gaming loading times are much better.

Performance is better but as I take it due to the method Window uses to write files, it's performance actually might suffer, so any application like O&O for example, to maximize the performance?

Defragmentation software would not help. Regardless of what the fragmentation software tells the SSD to do, the SSD will not listen. For example, if the software tells the drive to make a copy of [File Part Two] directly after [File Part One] and then delete the old copy, the SSD will receive the command but will make a copy of [File Part Two] at a random location to prevent wear-and-tear on the drive, rather than making a copy where it was told to make it. In all likelihood, the file will remain fragmented, but the drive will tell the defragmentation software, "I did what you asked", and the defragmentation software will think it accomplished something when it actually didn't.

  • 5 months later...

I heard Windows 7 RC builded with TRIM (SSD Command). Does anyone know if the Patriot SSD 64GB needs a firmware upgrade to utilitize the TRIM on Windows 7 RC?

I am going to setup a previously used Patriot SSD 64GB in a new HP Mini 2140 on Windows 7 x86 RC platform. Do I need to wipe it clean with a SSD erase tool before the re-install to claim all the memory back? If so, which one should I use? Anyone has any other advice?

Edited by vto
I heard Windows 7 RC builded with TRIM (SSD Command). Does anyone know if the Patriot SSD 64GB needs a firmware upgrade to utilitize the TRIM on Windows 7 RC?

I am going to setup a previously used Patriot SSD 64GB in a new HP Mini 2140 on Windows 7 x86 RC platform. Do I need to wipe it clean with a SSD erase tool before the re-install to claim all the memory back? If so, which one should I use? Anyone has any other advice?

probably should have started a new thread for this, but no, you dont need any "SSD Erase tool." it works just like a normal hard drive.

windows 7 does support the TRIM command, but i have no idea if this drive does, or ever will, support it. check the drive's website.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Valve finally confirms Steam Machine prices, starts at $1049 for 512GB option by Pulasthi Ariyasinghe The $1,428 option The Steam Hardware lineup that Valve announced last year is slowly starting to roll out. Following the recent Steam Controller launch, Valve has now confirmed the price of the Steam Machine, its all-in-one console-like solution for PC gaming in the living room. There are currently four variants being presented, with only the storage and the included controller being the biggest differences. All of the Steam Machines have the same internals consisting of a semi-custom AMD Zen 4 CPU with six cores and 12 threads, an RDNA 3 28CU GPU, 16GB of DDR5 memory, and 8GB of GDDR6 VRAM, all inside the familiar box Valve has been showing off for months now. The Steam Machine base model starts at $1,049. This has a 512GB NVMe SSD but does not come with a Steam Controller. Keep in mind that storage can be expanded with the microSD card slot too. Next, the $1,128 model has the exact same storage as the previous one but it does come with the new Steam Controller. If you need the Steam Machine to have more storage for games and apps than that, then the 2TB tiers are also available. The $1,349 Steam Machine has no controller once again, but it does ship with two extra faceplates (red fabric and solid walnut) to replace the standard black one. The final option costs $1,428, and it adds the controller back into the bundle. The Steam Machine ships with the Linux-based SteamOS. The box has a 1 Gigabit Ethernet port, DisplayPort 1.4, and HDMI 2.0, as well as one USB-C and four USB-A ports. Keep in mind that when purchasing standalone, the Steam Controller has a $100 price tag. With the above bundles, that drops to $80. It's a rather expensive machine for the internals it is touting, though the design and small form factor do help it somewhat. However, at the same time, the lack of upgradability hurts it. Valve says the ongoing parts shortages and massive price hikes for memory were the leading causes for this price. "The overall effect is that our original goal for the price of Steam Machine is no longer viable," added the company. "So the prices we're sharing today reflect the state of the world for manufacturing; or, more accurately, it reflects the price of the components as we've secured them over the past 6 months." Valve wants interested gamers to reserve it now to get the chance to pre-order a Steam Machine starting June 25, with shipping starting on June 29. Head here to sign up. The invites to buy it will be sent in a randomized order.
    • What the press release doesn’t mention, however, is how much water the natural gas plant itself will consume, Natural gas plants use about 2,803 gallons of water per megawatt-hour produced, which is significantly less than coal-fired plants that use around 19,185 gallons per megawatt-hour. Overall, natural gas plants are more water-efficient, using 584% less water than traditional power plants on average. AI generated
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      203
    3. 3
      PsYcHoKiLLa
      97
    4. 4
      Michael Scrip
      82
    5. 5
      neufuse
      67
  • Tell a friend

    Love Neowin? Tell a friend!