Patriot SSD 64GB Review


Recommended Posts

SSDs right now are not great for anyone. The price/performence is just not worth it.

Also, the brands are not the same; Seagate/WD rule in the magnet deparment while it seems Patriot rules in the flash deparment.

Its gonna be a few years (Id even say 5) until SSD drives become standard (not to mention the size limitations right now)

SSDs right now are not great for anyone. The price/performence is just not worth it.

Also, the brands are not the same; Seagate/WD rule in the magnet deparment while it seems Patriot rules in the flash deparment.

Its gonna be a few years (Id even say 5) until SSD drives become standard (not to mention the size limitations right now)

Size isn't much of a problem for me to be honest. I have a Data hard drive which keeps all the files I use. My current RAID-0 array is my Operating System only.

Found some wierd stuff out, I formatted the SSD's in 4KB allocation units (not even what is recomended!) instead of 512byte and a lot of the lock ups went away... go figure... but ontop of that I did lose about 10% of the read speed, and write speed went down to a little below what the 2 HDD's in RAID0 was

? Sequential Reading ? 157.0 MB/ps

? Sequential Writing ? 68.20 MB/ps

? Random 512KB Reading ? 137.90 MB/ps

? Random 512KB Writing ? 35.90 MB/ps

? Random 4KB Reading - 14.71 MB/ps

? Random 4KB Writing ? 1.81 MB/ps

when you say MB/ps is that for pico seconds? cause that's really fast... if it's for per second then then you don't need the " / " sign per means divide in this case....

Sorry I am a nerd and these things catch my eye.

when you say MB/ps is that for pico seconds? cause that's really fast... if it's for per second then then you don't need the " / " sign per means divide in this case....

Sorry I am a nerd and these things catch my eye.

That's an average of sustained speeds

  • 2 weeks later...
Found some wierd stuff out, I formatted the SSD's in 4KB allocation units (not even what is recomended!) instead of 512byte and a lot of the lock ups went away... go figure... but ontop of that I did lose about 10% of the read speed, and write speed went down to a little below what the 2 HDD's in RAID0 was

Do you think the OCZ V2 SSD's would work like the Patriot SSD's if I used a RAID controller with onboard memory?

That's an average of sustained speeds

Hey I loved your review, it actually sealed my purchase on two of these, couldn't pass up the price.

I have them running in raid 0 right now and they are very fast, however I'm only getting like 160MB/s read. Is it because I didn't use the same stripe size as you did? Would changing the stripe size allow me to reach up to the same read speeds you were getting? Also I didn't specify any particular format size either. Currently I haven't noticed any studdering, which was the only thing I was worried about before getting them. Have you tried multiple formats and stripe sizes, and found the best one? Sorry for the bombardment of questions, but any input would be greatly appreciated!

  • 3 weeks later...

Excellent review, in-depth and informative. I was waiting for a real person to deliver some test results along a review for the new SSD's. Once SSD fixes it's little quirks and expands to 1TB or larger, then I'll make the switch.

Although, having a dedicated SSD solely for virtual memory would be very interesting to test...

  • 1 month later...

I got this thing!

~ 120MB/S Read

~ 0.3 Ms seek

But, it does get stuck sometimes. Gaming loading times are much better.

Performance is better but as I take it due to the method Window uses to write files, it's performance actually might suffer, so any application like O&O for example, to maximize the performance?

Defragmentation software would not help. Regardless of what the fragmentation software tells the SSD to do, the SSD will not listen. For example, if the software tells the drive to make a copy of [File Part Two] directly after [File Part One] and then delete the old copy, the SSD will receive the command but will make a copy of [File Part Two] at a random location to prevent wear-and-tear on the drive, rather than making a copy where it was told to make it. In all likelihood, the file will remain fragmented, but the drive will tell the defragmentation software, "I did what you asked", and the defragmentation software will think it accomplished something when it actually didn't.

  • 5 months later...

I heard Windows 7 RC builded with TRIM (SSD Command). Does anyone know if the Patriot SSD 64GB needs a firmware upgrade to utilitize the TRIM on Windows 7 RC?

I am going to setup a previously used Patriot SSD 64GB in a new HP Mini 2140 on Windows 7 x86 RC platform. Do I need to wipe it clean with a SSD erase tool before the re-install to claim all the memory back? If so, which one should I use? Anyone has any other advice?

Edited by vto
I heard Windows 7 RC builded with TRIM (SSD Command). Does anyone know if the Patriot SSD 64GB needs a firmware upgrade to utilitize the TRIM on Windows 7 RC?

I am going to setup a previously used Patriot SSD 64GB in a new HP Mini 2140 on Windows 7 x86 RC platform. Do I need to wipe it clean with a SSD erase tool before the re-install to claim all the memory back? If so, which one should I use? Anyone has any other advice?

probably should have started a new thread for this, but no, you dont need any "SSD Erase tool." it works just like a normal hard drive.

windows 7 does support the TRIM command, but i have no idea if this drive does, or ever will, support it. check the drive's website.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Yeah I have a Sound Blaster X3 too (bought myself) and that is set up with the 6-channel cable for true surround. BUT Spotify and TIDAL do not support 5.1 SACD formats so I have to use Acoustic Engine for the fake surround. Apparently Apple Music is the only music streaming service with true Atmos/5.1 support.
    • I was already thinking about trying Fairphone with Murena /e/OS exactly because I don't want any AI on my communication device. For now, I've turned off all AI possible and turned on "Process data only on device" on my Galaxy S24.
    • They should lower the price but make clothing in the shops, like they've had in previous games, actually cost money. (Unless it's required for a mission)
    • FotoSketcher Studio 4.30 by Razvan Serea FotoSketcher Studio is a free creative tool that instantly turns your photos into artwork. With just a few clicks, you can apply styles like pencil sketches, watercolor, oil painting, ink drawings, cartoons, and abstract effects. Powerful yet simple sliders let you adjust every detail to match your vision, from subtle enhancements to bold artistic transformations. You can also improve your images with tools for contrast, sharpness, color, and brightness, plus add frames and text. It supports JPEG, PNG (including transparency), BMP, and WebP formats for both opening and exporting. Available for Windows (64-bit) and macOS (Apple Silicon and Intel), FotoSketcher also offers batch processing, manual retouching, and custom effects for advanced users. Completely free, including commercial use, with no ads or spyware. FotoSketcher Studio 4.30 changelog: New LUTs effect In the Photo Lab category you will find a new LUTs (Lookup Tables) effect for custom colour grading. It comes with 18 presets built right into the application (Cinematic, Kodachrome, Golden hour, Portrait and more), each with a live preview so you can see the look before applying it. Right-click the preview to compare with your original image. And if you have your own .cube files, you can load those from disk too. New "Stylize" category Added a brand-new Stylize category with four new effects. Three of them (Mosaic, Circles and Triangles) are built on the same space-filling idea, turning your photo into tiled mosaics, clusters of circles, or a low-poly triangle look. The fourth, Cartoon, is a bit different: it gives a clean graphic style with defined lines and solid colours. A little tip - set the colour intensity to 0 and Cartoon draws a pure outline drawing with no fill. Combined with the "Do not erase background" option, you can run it on top of any other effect to add crisp contours in two quick steps. Auto-Enhance and Full Reset Two small but handy additions. Auto-Enhance (just press E) tries to optimise your source photo - exposure, white balance, local contrast - for a 'dehazed', natural-looking starting point. And Full Reset clears everything back to a clean slate in one step (working image, history, LUT, script, brushes and sliders) without having to close and reopen the program. Press Ctrl+Shift+N, or right-click the exit button. Scripts The script engine has been updated to support all the new effects, with a few new commands and improved help. If you would like some inspiration, the recent scripting tutorial on this blog walks through several ready-made example scripts. The usual improvements The interface now uses new colour accents for better readability, the history gallery has had a few tweaks, and you can now open .webp images directly. On top of that, this release includes some performance improvements and a good number of bug fixes. Download: FotoSketcher Studio 4.30 | 55.9 MB (Freeware) Download: FotoSketcher Studio for macOS | 119.0 MB View: FotoSketcher Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      519
    2. 2
      +Edouard
      189
    3. 3
      PsYcHoKiLLa
      87
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      72
  • Tell a friend

    Love Neowin? Tell a friend!