Xbox 360 NXE hard drive install chart established


Recommended Posts

I was going to have a reply to this, but everybody else to care of it for me.

The point is, even if the differences are small in some games now, developers can cater and build their games with HD installs in mind now. Not sure how that all works out but if they know its available, I bet they can really cut times down in the future.

Just because it doesn't matter now, doesn't mean it won't in the future.

No they can't

Since the HDD "install" is just making an image file of theDVD and putting it on the disk and loading from that. and games disks still need to be optimized for loading from DVD first and oremost, not optimized for being used as an image file.

The only way to really make it "faster" is to NOT use the features the 360 API/Devkits gives the developers for fast loading from the disk, like streaming and using the cache. So asically you can "optimize" it for the HDD by making the disk loading slower, but it doesn't really affect the disk loading at all.

The games that load faster they either don't use the cache, or they one one time long loadings for a very large region/map where the icnreased speed of the HDD helps as bit. But then you have other games that do use all the eatures the 360 has for speeding up loading times such as Halo, where it's actually slower on the HDD.

Guys, if you think HDD installs are useless, you must enjoy your 360 sounding like a jet that's about to take off. I do not. Less wear and tear on the DVD drive alone will be worth it, especially on games you play a lot.

This :D

My favourite feature of NXE so far haha.

Makes me want a bigger hard drive, but am I hell paying for a hard drive at the price they are at. Think I might do that hard drive mod when I have some spare cash about.

When I was at Circuit City yesterday, I saw that they had the 120GB drive in-stock for $139.99. Still a little too much for me though. They had the 20GB drives for $79.99. I'd rather have the 120GB drive though. Can't really say if I want to pay that much for a drive.

No they can't

Since the HDD "install" is just making an image file of theDVD and putting it on the disk and loading from that. and games disks still need to be optimized for loading from DVD first and oremost, not optimized for being used as an image file.

The only way to really make it "faster" is to NOT use the features the 360 API/Devkits gives the developers for fast loading from the disk, like streaming and using the cache. So asically you can "optimize" it for the HDD by making the disk loading slower, but it doesn't really affect the disk loading at all.

The games that load faster they either don't use the cache, or they one one time long loadings for a very large region/map where the icnreased speed of the HDD helps as bit. But then you have other games that do use all the eatures the 360 has for speeding up loading times such as Halo, where it's actually slower on the HDD.

Not saying your wrong, but devs will find a way to optimize this process in the future. Maybe not a huge leap, but like you said optimize it first for the DVD and move onto at least making sure it isn't slower with it installed to HD. :p

I think a few people in this thread have major ego problems that they've only got 20GB hard drives.

Look at it from this point of view, if only from this point of view. The XBOX 360 is well known to have a huge amount of issues including heat and laser issues. Less use of the DVD-Rom drive will lower internal system heat, if only by one or two degrees Celsius, and also your laser is going to last a LOT longer.

I'm playing Mirrors Edge at the moment, I've just done the first level twice, Once on DVD and once on HDD. The game occasionally "hiccups" when playing on the DVD Drive, when playing on the hard drive it was a lot more fluid.

Gears of War 2 has the best example though, no more pop-on-textures :p

You disc is more likely to get scratched from being inserted and removed every time you play, then if you were to just leave it in.

And why would you take it off? There's no difference.

It works the same exact way, except that loading is done from the HDD and not from the DVD.

to me its not about the time it takes to load a game. I am playing fable 2 and hdd install is great. Without hdd install, to travel from one area to another, it used to take 5-6 seconds to load but after I installed it to hdd, all the areas loads up instantly. So basically only loading I see is when I boot the game. After that it only take maximum 2 secs when I travel from one area to another.

I think a few people in this thread have major ego problems that they've only got 20GB hard drives.

Look at it from this point of view, if only from this point of view. The XBOX 360 is well known to have a huge amount of issues including heat and laser issues. Less use of the DVD-Rom drive will lower internal system heat, if only by one or two degrees Celsius, and also your laser is going to last a LOT longer.

I'm playing Mirrors Edge at the moment, I've just done the first level twice, Once on DVD and once on HDD. The game occasionally "hiccups" when playing on the DVD Drive, when playing on the hard drive it was a lot more fluid.

Gears of War 2 has the best example though, no more pop-on-textures :p

I still get Pop-on-Textures or atleast fading quality textures in Gears 2.

lol @ the war.

TJ, I understand what you are saying, but you must understand that while the advantages don't seem all that great to you, they do to a lot of other people. Try it, you might like it.

And be honest, you are more likely to do something else during an install than a loading screen, there's no real logic there.

What loading screen in LO takes 40 seconds? I played it quite a bit and don't remember an instance of loading going more than 10 or 15.

The only reason that 40 minutes isn't "gaming time" is because you're installing a game to the HDD, were you not installing it you would be playing. That 40 minute install time is longer than the total loading time while playing therefore it's useless.

You still lose total minutes of play time either way, but I'm pretty sure you lose MORE total minutes of play time if you use the install feature. It's pretty simple mathematics.

half life 2, loading screens 40 seconds right on the site. The annoying hiccups on the inventory screen in fable 2 add up quickly. Mass Effect and Oblivion loading times are even more examples. Especially when they recache data from one local to another.

you still dont understand nongaming time.

were you not installing it you would be playing. That 40 minute install time is longer than the total loading time while playing therefore it's useless.

I would not be using that time to play the xbox. I just stated, I would be doing other things around the house. Not every second of free time is game time. I would be multi-tasking, its a new revolutionary time managing system. Where as I would be installing it games off the disc while reading/watching television/cooking dinner/laundry/vacuuming/cleaning/surfing the web/replying to posts about "game time" etc.

I don't know if it's much of clue on how to start games, BUT.

Most likely the trick is to have a disc that has multiple security ID's attached to them, so you would only need one disc in.

Mostly for modded console people, and it's just a theory.

I have created a disc that has all most if not all content removed that has just the security ID so that the game can launch, but it doesn't work.

So I'm guessing either I removed something important, or that the disc needs to be the same size.

like someone previously mentioned, i don't understand why everyone is making such extreme arguments over an optional feature. you don't have to install all your games and don't need to avoid the feature completely to save the install time (hit install before you go to sleep ffs). personally, i play COD4 more than anything else, so i'll probably just install that one game since i only have a 20GB drive.

Guys, if you think HDD installs are useless, you must enjoy your 360 sounding like a jet that's about to take off.

Rubbish. If that's the case you must have the console in a very dirty and dusty place. My 360 is as quiet as the TV itself. I can barely hear anything running inside it. The only thing I hear is the game and sound effects that my 360 outputs.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Couple years ago I got a brand new 4TB Samsung 990 Pro for $250 during Black Friday
    • Thanks
    • Can confirm, I've built stuff for others and no complaints using their products.
    • Yes I agree, it's annoying. You can now miss tabs unless you point low enough.
    • Sysinternals Suite 2026.17.06 by Razvan Serea The Sysinternals Suite is a comprehensive package of advanced Windows utilities created by Mark Russinovich, who launched the Sysinternals website in 1996 to share his system tools and technical resources. This suite combines a wide range of troubleshooting and diagnostic tools, including Process Explorer, Process Monitor, Sysmon, Autoruns, ProcDump, the PsTools collection, and many others. It provides everything IT professionals and developers need to manage, monitor, and troubleshoot Windows systems and applications. The Suite bundles all of the core troubleshooting utilities along with their help files. Non-troubleshooting extras—such as the BSOD Screen Saver or NotMyFault—are excluded. In addition to the well-known tools, it also includes AccessChk, Autologon, Ctrl2Cap, DiskView, Disk Usage (DU), LogonSessions, PageDefrag, PsLogList, PsPasswd, RegMon, RootkitRevealer, TCPView, VMMap, ZoomIt, and more. Sysinternals Suite 2026.17.06 changelog: Autoruns v14.3 - This update to Autoruns, a utility for monitoring startup items, adds bug fixes and improves the command-line application autorunsc. ZoomIt v12.1 - This update to ZoomIt, a screen magnification and annotation tool, adds image backgrounds, webcam background blur and microphone noise cancellation support. Coreinfo v4.01 - This update to Coreinfo, a tool that reports processor, socket, NUMA memory, and cache topology of a system, as well as processor features supported, adds support for new processor features. DebugView v5.02 - This update to DebugView, a tool for displaying both kernel-mode and Win32 debug output, adds Ctrl-Shift-A support for selecting all output, and agent skills support for the CLI utility. LiveKd v5.64 - This update to LiveKd, a utility that allows running the kernel debugger on a live system, fixes a debugging privileges issue. ProcDump 3.5.2 for Linux - This update to ProcDump for Linux, a tool for capturing process dumps, adds .NET counters and a custom core dumper. Process Monitor v4.04 - This update to Process Monitor, a utility for observing real-time file system, Registry, and process or thread activity, adds some bug fixes Sysmon v15.21 - This update to Sysmon, an advanced host security monitoring tool, adds some bug fixes. Download: Sysinternals Suite 2026.17.06 | 168.0 MB (Freeware) Download: Sysinternals Suite for ARM64 | 15.4 MB Link: Sysinternals Suite Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      eurospharma62 earned a badge
      One Month Later
    • Week One Done
      With What earned a badge
      Week One Done
    • Week One Done
      Harris Gilbert earned a badge
      Week One Done
    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      542
    2. 2
      +Edouard
      168
    3. 3
      PsYcHoKiLLa
      85
    4. 4
      ATLien_0
      64
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!