[Review] 15-inch MacBook Pro (Late 2008)


Recommended Posts

So, my girlfriend and I went on vacation this weekend and decided that it would be fun to take the bus practically from one end of the province to the other. I'm a bit of a geek, so I wound up dragging my notebook with me, and sure enough I couldn't stand to go longer than an hour without opening it up. So, I decided to write a review of my MacBook Pro to kill the time, and now that I am home I thought I would post it here for all of you to read. Take it easy, it's my first review. ;)

=================================================

On October 14, 2008, Apple refreshed their line of portable notebooks, bringing a much needed overhaul especially to the design of the MacBook Pro, which has been using the same style casing as the PowerBook G4 which preceded it, and in the process upgraded many of the components inside of not only the MacBook Pro, but its little brother, the MacBook, and the MacBook Air as well.

The packaging was very well thought out in, cutting down on not only the amount of packaging materials used but on the size of the packaging as well, so that more units can be shipped in the same amount of space, reducing Apples overall carbon footprint.

If you have seen the previous generation MacBook Pro product packaging, you will know that the unit shipped in a large black box, and inside you would find the computer and the accessories buried between two large pieces of Styrofoam; while this approach protects the product inside, it isn?t the most environmentally friendly packaging (and Styrofoam is known to crumble and fall apart, and takes a long time to break down).

With the new packaging, the first thing you will notice when you open the box is that the packaging is very minimalist and clean. On the inside, there is a block of foam padding adhered to the top of the packaging, much like that found in the packaging for the MacBook Air and the iPhone as well. The MacBook Pro sits on top of a recyclable plastic tray, with a pull tab that allows you to easily remove the computer from the packaging. With the computer out of the way, you simply lift the plastic tray out of the box and you will be presented with the software media and user guides (?Everything Mac,? which is the user guide for the MacBook Pro, and ?Everything Else,? which has the warranty documentation, the power specifications, and the software installation discs).

If you are familiar with the earlier generation MacBook Pros, you will know how many pieces made up the overall case, including the top and bottom case assemblies. The process of upgrade the hard drive, clean the fans, or service the machine overall, it involved what seemed like to many as open heart surgery and involved practically disassembling the entire computer; and even then when the casing was reassembled there was a chance that the casing wouldn?t be put back in place, in the end there would usually be some gaps between the top and bottom casing, and there were a lot of screws involved (not only that, but there were different sizes, of both Phillips and Torx).

With the new MacBook Pro, Apple really stepped up to the plate and provided the most convenient enclosure to date. To access the hard drive or the battery, you simply press the release switch on the bottom of the computer and lift the cover off, inside you will find the battery (which has also been redesigned) and the hard drive, both of which have convenient pull tabs, no longer do you need to pry the hardware out of the casing.

Upgrading the memory is almost as easy; to do so you simply remove a few screws from the upper cover plate and remove the cover, where you will find the slots for the memory modules. You also gain access to the logic board, the fans, and other internal components (however, I would not recommend servicing these components yourself as it would void the AppleCare warranty, should you need any servicing done you should always contact AppleCare or an Apple Authorized Service Provider; although it will be useful to clean out the fans using a can of compressed air instead of paying a service technician to do the same thing.)

How did Apple come up with the new manufacturing process? Well, when they set out to create the MacBook Air they needed to create an enclosure that was not only light, but extremely thin, and it would not be feasible to use multiple layers of aluminum like in the MacBook Pro, and a thin layer of plastic would be brittle and easy to break. So, Apple created a new manufacturing process, which starts with a solid block of aluminum. With this process, the end product is one piece that is extremely rigid and solid, there?s less chance for failure.

What better than to bring this manufacturing process to the MacBook and the MacBook Pro, which brings the same rigidity and solid construction to the two most popular notebooks that Apple has to offer. The difference is quite noticeable compared to the previous generation MacBook Pro; you can pick up the new model with one hand at the edge and there is no flex or bend to the entire computer, it is very impressive.

The new MacBook and MacBook Pro both feature environmentally friendly materials, not only is aluminum extremely recyclable, but Apple now uses PVC-free plastics even with the internal cabling, brominate-free flame retardants and arsenic-free glass; the MacBook Pro also earned a rating of EPEAT Gold for 2008, which is very impressive. In a day and age where we need to be conscious about what is contained in the products that we use, Apple is taking some great strides and it makes me proud to use Apple products.

Apple also decided to make a few other changes to the MacBook Pro, which have a few users up in arms. One of these changes involve the screen, previous models offered both matte and glossy options; the new model only offers glossy, however it isn?t the traditional glossy coating that you?ve seen on the previous generation products. Instead, the glossy coating on the MacBook Pro is one sheet of glass, exactly like what is used on the iMac, and it looks very impressive.

Some have complained about the glossy display and that the reflections can be very distracting, but in all honestly I haven?t encountered any situations where the glossy screen is distracting to my work (I have used this computer in different lighting conditions in a bedroom, a kitchen, a living room, on a bus driving down the highway, and at my workplace where practically the entire ceiling is composed of nothing but fluorescent tubes). I usually have the brightness set to 3 bars above being off and it?s fine, in brightly lit areas where the sunlight may reflect off the screen I find that having the screen set to one half brightness is good; I haven?t been met with any situation that requires that I have the screen set to full brightness, which is so bright that it is almost blinding.

One reason why Apple chose glass on the display of the new model MacBook and MacBook Pro is the ability to add some structural rigidity to the display itself, meaning it is extremely solid; even when applying pressure to the back of the display there is absolutely no distortion to the image displayed on the panel.

During the announcement of the new MacBook Pro, it was mentioned that the new screen makes colors ?pop," and I have to agree, colors are very rich and blacks are very deep, my previous MacBook Pro had a matte screen and I don?t miss it at all.

Another change in the MacBook Pro is that the FireWire 400 port has been removed, leaving only one FireWire 800 port. I don?t use FireWire at all (all of my devices, including an external hard drive, a camera, and a camcorder, are all using USB 2.0), so this doesn?t bother me at all. For those of you who need FireWire 400, you can simply buy a FW800-to-FW400 conversion cable.

On the 13-inch Aluminum MacBook, there is no FireWire port at all, which leads me to believe that Apple will be phasing it out within the next year or two. Previously, you could use the Migration Assistant with a FireWire cable to migrate from one Mac to another, however with FireWire missing from the MacBook and only FireWire 800 present on the MacBook Pro, Apple has made a change to the Migration Assistant so that you can use an Ethernet cable to move your data. One thing that you won?t be able to do without FireWire though is booting the computer in Target Disk Mode which is a bit of a downfall, but it?s not like you?re going to use that feature every day.

The keyboard backlighting is much improved over previous MacBook Pro models, with less light leakage and better illumination of the actual letters on the keyboard. One change that has been inspired by the MacBook Air is the use of a plastic keyboard where the keys are actually embossed into the computer enclosure (this is commonly referred to as the ?chicklet? or ?pill? style) with a black background and white letter color scheme, which provides a lot better contrast compared to the silver keyboard on previous models; in my opinion this keyboard is a lot easier to type on compared to my older MacBook Pro, as my fingers used to ?catch? on the corners of the keys and it felt as if the keys were going to pop off, whereas with the new model my fingers glide across the keys with ease.

In February of 2008, when Apple updated the MacBook Pros, they introduced multi-touch gestures to the trackpad, simplifying things like page navigation in Safari and other common tasks. With the latest model, this has been upgraded to include four-finger gestures, which allows you to use Expos? to show all windows or show the desktop (this saves quite a bit of time), you can pinch to zoom in on documents and web pages, and you can rotate entire pages or pictures, all with the trackpad. It?s very sleek and impressive.

Besides the updated gestures, Apple has also decided to remove the dedicated trackpad button, instead the trackpad is now one entire touch sensitive button, and it?s made out of glass (it doesn?t look like it, but it really is). The response from the trackpad is very precise and your finger will glide across it with ease, and if you?ve used a Mac before you?ll have no problems getting used to not having a button to click; when I first set up the computer, I clicked on the trackpad just like I did with my old MacBook Pro without even noticing the difference of there being no button.

Now, across the entire MacBook lineup, Apple have decided to use the NVIDIA GeForce 9400M chipset, which also includes an integrated graphics solution that uses 256MB of the installed DDR3 memory, and overall the chipset is very impressive with a high level of performance and stability. This lowers the gap between the three MacBook products as far as performance.

The MacBook Pro that I chose has a 2.4 GHz processor (specifically, it is an Intel Core 2 Duo P8600, which has 3MB of L2 cache, a 1066 MHz front-side bus, and uses 25W of power), 2 GB of DDR3 1066 MHz memory, a 250 GB 5,400-rpm hard drive, and in addition to the GeForce 9400M integrated graphics processor, the MacBook Pro also includes a discrete GeForce 9600M GT, this model ships with 256MB of GDDR4 video memory for added performance.

There are several reasons why I chose this model, primarily it provides all the speed and storage that I require; a few extra megahertz and more L2 cache wouldn?t be very noticeable for the tasks that I perform and the extra 2 GB of DDR3 memory would be overkill. Also, this model is more power efficient as it uses a 25W TDP processor whereas the 2.53GHz and 2.8GHz Intel Core 2 Duo processors have a power usage of 35W.

One of the reasons why I bought my previous generation MacBook Pro was because of the discrete graphics processor that it provided (GeForce 8600M GT), however I find that even the GeForce 9400M in this new model is more than adequate for most tasks and performs quite well. I really haven?t found a need to use the GeForce 9600M GT as the applications that I use don?t really use it to its fullest potential, and I don?t play any games or use Boot Camp.

The 250 gigabyte hard drive is more than enough for my use. Two of the biggest storage uses on my computer would be my photo library and my music library (~ 2.7 GB in JPEGs in the iPhoto Library and 9.07 GB of AAC files in iTunes respectively). I did decide to reinstall Mac OS X about a week after I received the computer simply to remove the unneeded languages (as I didn?t feel like using unsupported tools like Monolingual or Xslimmer to remove them), so with all of my data in place I am using about 34 GB of the 232.57 GB that is available when the disk is formatted (don?t you just love it that hard drive manufacturers still get away with using incorrect terminology and twisting numbers?)

As far as battery life, I find that it is very good and it matches the expectations that Apple have set out in their marketing material. When using the GeForce 9400M integrated graphics processor and standard energy saver settings with Bluetooth and Airport (Wi-Fi) turned on while performing some web browsing, writing e-mails and instant messaging with iChat, along with some light graphic editing in Pixelmator and writing code in TextMate or documents in iWork ?08 with the screen brightness set to one half, the battery lasts for around 5 hours and 15 minutes, and when watching movies, the battery lasts for about 3 hours and 45 minutes, enough to watch two full-length feature films. While using the GeForce 9600M GT discrete graphics processor, the battery lasts for around 4 hours and 50 minutes performing common tasks and 3 hours and 10 minutes when watching movies, respectively.

Apple have also improved the internal layout of components and the amount of heat that is produced by these components has also been reduced. With the previous model MacBook Pro, the bottom of the computer would become quite hot, especially when using the computer on your lap; this isn?t a problem with the latest MacBook Pro especially when using the integrated graphics processor. The bottom of the unit does become slightly warm when using the discrete graphics processor, but it comes nowhere near to the amount of heat that the previous models used to produce.

These models no longer come with any trial software at all, neither pre-installed from the factory or on the installation media which is an excellent touch because you don?t need to reinstall the operating system when you pull the computer out of the box just to remove the trial software. Previously, I?d find myself reinstalling the software on any Mac when setting it up out of the box to fully remove the trial software that was installed (for example, Office for Mac 2004 and Aperture). This makes it a lot easier to get up and running.

In conclusion, the MacBook Pro (Late 2008) overall is an excellent product that performs well right when you take it out of the box and is one of the best tools you will ever own, I absolutely love it and I can sUnboxing Photos!s to come.

========================================

Unboxing Photos!

3084614773_ebf84a852f.jpg?v=0

3084618303_a5a5ff6937.jpg?v=0

3085454224_ba8a2062ee.jpg?v=0

3084616685_f01769cec3.jpg?v=0

3084619121_497765bb98.jpg?v=0

3085458380_57c2f4f85c.jpg?v=0

3084620511_a850279d30.jpg?v=0

3084621441_ac08292220.jpg?v=0

Workstation Photos

3085498100_4be99d61db.jpg?v=0

3085483802_ac35fc3093.jpg?v=0

3085483090_4143599606.jpg?v=0

3085477934_2b410c936d.jpg?v=0

3085476944_6509120b64.jpg?v=0

Edited by Mercellus
Link to comment
https://www.neowin.net/forum/topic/697736-review-15-inch-macbook-pro-late-2008/
Share on other sites

good review (was a bit of a long read but still good :))

Thanks! I was bored, that's actually the second revision of it (the first one didn't make much sense at all, it was too scattered). I'm hoping to do more reviews in the future though so I guess I have to start somewhere!

This was a well written but a slightly biased review. You seem to agree with everything Apple has done... which I find very odd.

No Firewire 400? Huge problem for me. My iPod is firewire 400 but my external harddrive is 800. On my current MBP I can plug in both at the same time. With the new one, not only do I have to lug an external adapter with me but I can only plug in one at a time.

No matte screen? Another huge problem. Glossy screens are good for video and 3D rendering... as for graphics design or any sort of design they are moot.

I don't understand how you are not having problems with the screen as I am having problems with it even at the Apple store. I have used my friend's macbook pro (late 2008) for a while and I just couldn't stand the glare and reflection (mostly of my face) wherever I go. Another huge problem for the new macbooks is if you tilt the base any higher than 45degrees, the screen collapses down. I nearly dropped the new MBP when that happened. Try it, open your MBP, tilt the MBP to abouy 60-90 degrees, your screen will fall down. This is a huge issue for in bed users like me (I like to type and chat late at night in bed...so sue me :D)

Magnet isn't strong enough for the latch. I feel that the magnet isn't strong enough for the latch to have that extra closed feeling. Probably just a personal issue but I like the button on my early 08 macbook pro.

On a side note, light leakage from the keyboard is perfectly fine. It defines the keys.. so you can easily see where you are typing. I don't know why people are flustered about this.

Not to say that your review is bad or anything but this is a pro laptop, and it seems that they're marketing it towards no pro users. What do you do on this computer if I may ask?

And as for the heat, have you tried running a game or 3D simulation software to see how how it usually gets? My early 08 Macbook pro is nice and cool surfing the internet / typing / coding but once you boot up Warcraft 3 it gets to 80 degrees... (this is when i turn the fan to 6000RPM and watch it go back down to 50)

My perfect laptop upgrade would be (in a few years, my early 08 has lots of life in it still):

Macbook pro Unibody design

1920x1200 15.4 Matte Screen

4gigs of DDR3 1066mhz ram

500 gb HD or 256 gb SSD

All the ports of the MBP early 08 design

Blu ray super drive

2.66ghz Core i7 with Montevina platform

nVidia GTX290m graphics chip with a 9400m chipset

10.6 Snow Leopard preinstalled

Edited by wankey
No Firewire 400? Huge problem for me. My iPod is firewire 400 but my external harddrive is 800. On my current MBP I can plug in both at the same time. With the new one, not only do I have to lug an external adapter with me but I can only plug in one at a time.

Like I said, I don't use FireWire, and I don't have any FireWire devices, everything that I own uses USB 2.0 - from my iPhone, my iPod, my external hard drive, my camera and camcorder, etc.

No matte screen? Another huge problem. Glossy screens are good for video and 3D rendering... as for graphics design or any sort of design they are moot.

I had a matte screen previously, and quite honestly I find that the color is a lot better than on the previous MacBook Pro.

I don't understand how you are not having problems with the screen as I am having problems with it even at the Apple store. I have used my friend's macbook pro (late 2008) for a while and I just couldn't stand the glare and reflection (mostly of my face) wherever I go.

Again, to my eyes the screen looks perfectly fine, there's a reflection but that happens with any glossy screen, it's not overpowering on the MacBook Pro like it is on other notebooks.

Another huge problem for the new macbooks is if you tilt the base any higher than 45degrees, the screen collapses down. I nearly dropped the new MBP when that happened. Try it, open your MBP, tilt the MBP to abouy 60-90 degrees, your screen will fall down. This is a huge issue for in bed users like me (I like to type and chat late at night in bed...so sue me :D)

I use my MacBook Pro either on a desk, a table, or on my lap when I am sitting in the proper position, I don't have the notebook tilted at all at any time.

Magnet isn't strong enough for the latch. I feel that the magnet isn't strong enough for the latch to have that extra closed feeling. Probably just a personal issue but I like the button on my early 08 macbook pro.

The 17" MacBook Pro had a similar issue where the hinge had some trouble holding the display up without any movement, it's probably because of the glass adding a slight bit of weight to the display.

On a side note, light leakage from the keyboard is perfectly fine. It defines the keys.. so you can easily see where you are typing. I don't know why people are flustered about this.

There is some light around the actual keys themselves but it's not nearly as bad as what it was on earlier generations, I agree with you that it does indeed define the keys.

Not to say that your review is bad or anything but this is a pro laptop, and it seems that they're marketing it towards no pro users. What do you do on this computer if I may ask?

Programming, graphics design, some 3D design work, web browsing & email, instant messaging, listening to music, watching movies, editing videos in iMovie and editing photos in iPhoto (soon going to pick up a copy of Aperture and take things to the next level).

And as for the heat, have you tried running a game or 3D simulation software to see how how it usually gets? My early 08 Macbook pro is nice and cool surfing the internet / typing / coding but once you boot up Warcraft 3 it gets to 80 degrees... (this is when i turn the fan to 6000RPM and watch it go back down to 50)

My previous MacBook Pro got really hot as soon as you did anything with it, including simple coding in a text editor, and it was if you were using a portable egg cooker when using any other graphics intensive program or using the iTunes visualizer; this doesn't happen at all with the new MacBook Pro.

The late 2008 MacBook Pro isn't for everyone, keep in mind that when purchasing a computer you should always look at your specific needs before making any decisions. For most though, I think this new model is more than adequate. Thanks for your comments, I appreciate it! :)

Also, to those wanting pictures, I'll upload them in a little bit.

My perfect laptop upgrade would be (in a few years, my early 08 has lots of life in it still):

Macbook pro Unibody design

1920x1200 15.4 Matte Screen

4gigs of DDR3 1066mhz ram

500 gb HD or 256 gb SSD

All the ports of the MBP early 08 design

Blu ray super drive

2.66ghz Core i7 with Montevina platform

nVidia GTX290m graphics chip with a 9400m chipset

10.6 Snow Leopard preinstalled

You sure you don't need a nuclear missile with that? :whistle:

Seriously though, all those options would make the notebook more expensive then it already is, increases it weight, size and heat output, totally ruining the entire idea of a Macbook.

But yes, there is nothing wrong in craving for it in dream world.

Well most of it is easily doable. 500 gig HDD is already on the market (in a few year probably will drop price to current 250gigs) bluray super drive is already doable. The 2.66ghz core i7 mobile we'll have to see just how good it is. More ports on the MBP? I'm sure Apple will find a way to do this. But as things are going right now, everything is moving to Usb so I wouldn't mind some more USB 3.0 ports...

Snow Leopard will be available soon. The GTX290m GPU is coming out next year along with a 9400m refresh.

A 1920x1200 15.4 matte screen has been around for ages (circa 2005) so I dunno why they don't put it in their MBPs...

Good things are coming to laptops!

A 1920x1200 15.4 matte screen has been around for ages (circa 2005) so I dunno why they don't put it in their MBPs...

Personally I don't think I would want to use a 1920x1200 resolution on a 15.4" display again, I've tried this once and even after spending close to a month trying to get used to it I found that it strained my eyes too much and I would have to be practically glued to the display to see anything, and when watching standard definition DVD movies any closer than half way across the room you could clearly see distortion and pixelation. Once we have some resolution independence this may all change, but for now, 1440x900 is pretty good.

Personally I don't think I would want to use a 1920x1200 resolution on a 15.4" display again, I've tried this once and even after spending close to a month trying to get used to it I found that it strained my eyes too much and I would have to be practically glued to the display to see anything, and when watching standard definition DVD movies any closer than half way across the room you could clearly see distortion and pixelation. Once we have some resolution independence this may all change, but for now, 1440x900 is pretty good.

I would personally be all over it...... that's the only thing I don't like about my macbook pro

anyone with a new (late 2008) MBP could you please tell me if the firewire chipset is made by TI (Texas Instruments) or Agere. I think you can check by doing a command + v or command + s during startup....i hope to god its still the TI chipset or else no musician would invest in a mac

Just so you know Firewire isn't being phased out and you won't see it disappear from MacBook Pros in the future. On the consumer level FireWire isn't as popular as most users aren't transferring lots of data over long periods of time. So USB 2.0 is just fine for that, however on the pro level such as the film industry we use firewire for lots of stuff. Where we need fast transfer rates over a long period of time instead of just a burst that USB can do. The MacBook Pro and Mac Pro are Pro-Grade products used by professionals where as the MacBook is only used by individuals and some business cases where they don't need something high end.

anyone with a new (late 2008) MBP could you please tell me if the firewire chipset is made by TI (Texas Instruments) or Agere. I think you can check by doing a command + v or command + s during startup....i hope to god its still the TI chipset or else no musician would invest in a mac

Just checking through the Console and it looks like it's utilizing an Agere/Lucent FireWire chip, however I believe the previous model (Early 2008) used this chipset as well.

Just so you know Firewire isn't being phased out and you won't see it disappear from MacBook Pros in the future. On the consumer level FireWire isn't as popular as most users aren't transferring lots of data over long periods of time. So USB 2.0 is just fine for that, however on the pro level such as the film industry we use firewire for lots of stuff. Where we need fast transfer rates over a long period of time instead of just a burst that USB can do. The MacBook Pro and Mac Pro are Pro-Grade products used by professionals where as the MacBook is only used by individuals and some business cases where they don't need something high end.

with USB3 coming I wouldn't be surprised to see firewire phased out unfortunately. It was better than USB2 but since it hasn't been updated in so long....

with USB3 coming I wouldn't be surprised to see firewire phased out unfortunately. It was better than USB2 but since it hasn't been updated in so long....

What are the specs of USB 3 compared to FireWire 800? I just don't see Apple phasing out Firewire atleast not as soon as next year when the film industry is such a big player in buying their products. All the cameras we use <except the film cameras of course> have Firewire.

What are the specs of USB 3 compared to FireWire 800? I just don't see Apple phasing out Firewire atleast not as soon as next year when the film industry is such a big player in buying their products. All the cameras we use <except the film cameras of course> have Firewire.

Directly from Wikipedia

USB 3.0

On September 18, 2007, Pat Gelsinger demonstrated USB 3.0 at the Intel Developer Forum. The USB 3.0 Promoter Group announced on November 17, 2008 that version 1.0 of the specification has been completed and is transitioned to the USB Implementers Forum (USB-IF), the managing body of USB specifications. This move effectively opens the spec to hardware developers for implementation in future products. The technology will provide a maximum bandwidth of 5.0 Gb/s (625 MB/s), and with the possibility for an optical interconnection.

USB 3.0 will remain backwards compatible with USB 2.0 as far as the Type A connector is concerned. While USB 2.0 is based on uni-directional data flow with negotiated directional bus transitions, USB 3.0 supports simultaneous bi-directional data flows through the use of dual-simplex four-wire differential signal wiring as compared to half-duplex two wire differential wiring in USB 2.0. Other interesting innovations in USB 3.0 include new power management features that support idle, sleep and suspend states.[29] The two new differential pairs make the cable about as thick as an Ethernet cable and provide full-duplex transfers.[30]

According to electronicdesign.com cables will be limited to 3 m at full speed. The technology is similar to PCI Express 2.0 (5-Gbit/s). It uses 8B10B encoding, linear feedback shift register (LFSR) scrambling for data, spread spectrum. It forces receivers to use low frequency periodic signaling (LFPS), dynamic equalization, and training sequences to ensure fast signal locking.[citation needed]

USB 3.0, which will be called USB SuperSpeed in commercial devices, is expected to be available in commercial controllers in the second half of 2009. Consumer products are expected to become available in 2010.[31]

There is ... a lot. :(

Light leakage from where, actually around the keys not just through the letters/numbers? Light it meant to be emitted from the sides of the keys.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Can you give an example of when you would want to use Rufus over the other or vice versa? Just wondering which is the "best".
    • Oh no...the wallet is already screaming. So many games and so little time. Being old and responsible is awful!
    • LibreWolf 152.0.2-1 by Razvan Serea LibreWolf is an independent “fork” of Firefox, with the primary goals of privacy security and user freedom. It is the community run successor to LibreFox. LibreWolf is designed to increase protection against tracking and fingerprinting techniques, while also including a few security improvements. This is achieved through our privacy and security oriented settings and patches. LibreWolf also aims to remove all the telemetry, data collection and annoyances, as well as disabling anti-freedom features like DRM. LibreWolf features: Latest Firefox — LibreWolf is compiled directly from the latest build of Firefox Stable. You will have the the latest features, and security updates. Independent Build — LibreWolf uses a build independent of Firefox and has its own settings, profile folder and installation path. As a result, it can be installed alongside Firefox or any other browser. No phoning home — Embedded server links and other calling home functions are removed. In other words, minimal background connections by default. User settings updates Extensions firewall: limit internet access for extensions. Multi-platform (Windows/Linux/Mac/and soon Android) Community-Driven Dark theme (classic and advanced) LibreWolf privacy features: Delete cookies and website data on close. Include only privacy respecting search engines like DuckDuckGo and Searx. Include uBlockOrigin with custom default filter lists, and Tracking Protection in strict mode, to block trackers and ads. Strip tracking elements from URLs, both natively and through uBO. Enable dFPI, also known as Total Cookie Protection. Enable RFP which is part of the Tor Uplift project. RFP is considered the best in class anti-fingerprinting solution, and its goal is to make users look the same and cover as many metrics as possible, in an effort to block fingerprinting techniques. Always display user language as en-US to websites, in order to protect the language used in the browser and in the OS. Disable WebGL, as it is a strong fingerprinting vector. Prevent access to the location services of the OS, and use Mozilla's location API instead of Google's API. Limit ICE candidates generation to a single interface when sharing video or audio during a videoconference. Force DNS and WebRTC inside the proxy, when one is being used. Trim cross-origin referrers, so that they don't include the full URI. Disable link prefetching and speculative connections. Disable disk cache and clear temporary files on close. Disable form autofill. Disable search and form history...and more. Download: LibreWolf 64-bit | Portable 64-bit | ~100.0 MB (Open Source) Download: ARM64 | Portable ARM64 Links: LibreWolf Home Page | Addons | Screenshot | Reddit Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hands on with iFlyTek AINote 2 E-Ink tablet: insanely thin and smart by Taras Buria During Amazon Prime Day 2026, iFlyTek is offering its E-Ink tablets with big discounts. The AINOTE 2 is now available at 20% off, allowing you to save quite a lot on one of the thinnest E-Ink tablets out there. I was offered a chance to look at the device, so here are my impressions. The AINOTE 2 is a large 10.65-inch E-Ink tablet that strikes you the moment you take it out of the box. It is extremely thin. At just 4.2 mm, this tablet is at the edge of what is possible for a device with a USB Type-C port. It is also very light, which makes it comfortable and enjoyable during long reading sessions. The tablet has a gold metal chassis with the front and back made of plastic. The back also features four rubber feet that prevent it from sliding around your desk when writing. Besides a USB Type-C port and an LED indicator, there are two buttons mounted on the top edge: a power button with a built-in fingerprint scanner and a dedicated AI button. I would say the fingerprint scanner is quite mid. Given that iFlyTek positions the device as a digital notebook, it makes sense to have a biometric scanner to protect sensitive information. However, it is not the fastest fingerprint reader, and sometimes it fails to recognize my finger. I assume that is due to the tablet's insane thinness. A dedicated AI button is an interesting choice, especially in the middle of the top edge. I can see this button being useful for those who heavily rely on AI and use it frequently, but I cannot help but think its placement is impractical. Having it on one of the longer sides would make so much more sense. The AINOTE 2 is a very pretty device. Gold finish with thin chassis and nearly symmetrical front bezels create a fantastic combination, and iFlyTek cleverly hides the front chin with a section that looks like an extension of the screen, housing two touch-capacitive buttons: one for AI and one for quick notes. This section can also scroll pages when you swipe from the middle to the left or right. It is a cool idea, and very handy when you need to scroll tens of pages at once. AINOTE 2's elegant look extends from its exterior to its software. The user interface is very clean and not cluttered with an abundance of buttons. The tablet prioritizes the note-taking experience, and when you unlock it, it defaults to the list of all notes and folders. Additionally, there is a separate "Schedule" section with your calendar, tasks, memos, and other productivity features. You can connect your Outlook or Google account or use a local calendar. The tablet has quite a lot of AI features powered by OpenAI's GPT-5 and Google's Gemini 3. Besides a standard app with all your chats, you can invoke AI by pressing its dedicated button and dictating your request. It is not limited to just chats. It works with the built-in calendar, and you can tell it to create events, tasks, notes, and more. Additionally, AI features are integrated into the built-in notepad, allowing you to summarize notes, ask questions about your notes, and more. The tablet can OCR handwritten text in different languages (about 120 languages, which is very impressive), and it surprised me with very good accuracy. Voice note transcription is also available, including a "multiplayer" mode where the tablet detects each speaker. Unfortunately, the AINOTE 2 has no built-in speakers (even though it somehow makes a tapping noise when you flip pages using the Quick Bar), so the only way to listen to something is to connect a Bluetooth speaker or headphones. However, there are four front-facing mics for dictation, voice notes, AI chats, and more. Unfortunately, certain features require a Pro subscription that costs $5.99/mo or $59.99/year. Those include offline voice transcription, access to better AI models, the ability to edit notes on a PC or mobile app, and extended service coverage similar to Apple Care. It is a bummer to see yet another app, especially in a device that costs $649, but at least they give a free 90-day trial so that you can see if the benefits justify the price. As for the reader, it supports PDF, EPUB, TXT, MOBI, AZW3, DOC(X), XLS(X), PPT(X), JPEG, JPG, and PNG. The app is quite customizable, with features like text contrast/boldness/size adjustments, margins and spacing customization, and the ability to load custom fonts. Plus, you can annotate books with the stylus, add text notes, and use AI to work with them. Just keep in mind that most AI features require an active internet connection. Like with other E-Ink tablets with Android inside, you can load any other reader you want from the Google Play Store or a third-party source. Despite its hefty price tag of $629 or $519 by the time of publishing this article during Prime Day 2026, the AINOTE 2 has quite modest hardware inside. There is only 4 GB of RAM and about 42GB of storage. It is powered by the RockChip RK3576 processor with 8 cores at 2.2 GHz. Given that the tablet runs Android 14 and has Google Play, you can install Android apps, but do not expect much from this thing performance-wise. As for the battery, there is a 4,000 Li-Ion battery, which, on full charge, lasted me for about one week of active daily use of reading and note-taking. The screen has a resolution of 1920x2560 pixels, which equals 300 PPI, a perfect spot for a sharp, nice-to-read display. It supports EMR styluses that do not require charging, and I have to say that the note-taking experience on this tablet is fantastic. Stylus lag is nearly imperceivable, creating a very natural, paper-like feel. The stylus comes in the box (including two extra nibs), and it features an extra button for various actions and an eraser on top. It magnetically attaches to the tablet and stays safely secured. The stylus has a very nice coarse texture, and thanks to using Wacom tech, you can swap it for any other EMR pen if you wish. The AINOTE 2 has no front light, and because of that, the display sits very close to the screen surface, reducing the distance between the stylus tip/your finger and the display to a minimum. No front light is certainly an inconvenience in certain scenarios, but the screen makes up for that with a seriously impressive paper-like feel and writing experience. In dark conditions, you will have to find a lamp, but the good thing is that the screen has a solid anti-glare surface that diffuses light. The display has two modes: Crisp and Fast. Crisp ensures the image stays, well, crisp and sharp, while Fast speeds up refresh rate and response by toning down display resolution and making everything a bit more jagged. In my testing, I only used Fast mode when browsing the web for a much faster render time. The iFlyTek AINOTE is an impressive device, but it's not flawless. A few things disappointed me during a week of using it. Software localization has a bunch of not necessarily broken, but certainly awkward, machine-translated English. System navigation is not good, as there is no universal "Home" gesture. To go to the main page, you have to swipe up and then press the Home button from the multi-tasking window. There are many gestures for various actions, such as display cleanup, screenshot, undo/redo, but no back/forward or Home gestures. I really hate that the tablet won't let me update its software without creating an iFlyTek account first. Finally, privacy could be a concern for some, as most tablets' features require an active internet connection, an iFlyTek account, and sharing data when using AI. If you can overlook its quirks, some of which could be addressed with software updates (I received two with massive changelogs over a single week), and accept a $519 price tag (with a discount), you will be happy with the AINOTE 2. However, if you do not need that many AI features in an E-Ink reader or you want something a bit more affordable, you'd better look at cheaper competitors from BOOX or Amazon, such as the BOOX Go 10.3 Gen 2 or the Kindle Scribe, which is currently 24% off during Prime Day sales. Buy iFlyTek AINOTE 2 on Amazon - $519 | 20% off with Prime What I liked What I disliked Very impressive hardware Beautiful design Fantastic display with an EMR stylus Supports offline voice transcription Easy-to-use software Clever, useful, and well-made AI features A fingerprint scanner Very expensive Some features require a subscription Poor system navigation Mandates a user account No speakers Privacy could be a concern Note: iFlyTek provided the review unit without any editorial input or review guidance. As an Amazon Associate, we earn from qualifying purchases.
    • Look up "greed". If you are willing to buy that it's only inflation, I've got a bridge to sell you.
  • Recent Achievements

    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      416
    2. 2
      +Edouard
      168
    3. 3
      PsYcHoKiLLa
      132
    4. 4
      Xenon
      73
    5. 5
      Michael Scrip
      73
  • Tell a friend

    Love Neowin? Tell a friend!