Want to increase my arm size in 6 weeks - any tips?


Recommended Posts

I am a skinny bloke (6'3'', 10st 10) and want to make my arms as large as possible in six weeks. I am happy to go to the gym everyday if need be.

Do you have any tips? (e.g. what to eat, when to eat, exercises etc.)

Check rappehs thread in 'the forum'?

But yeah, I'd head to the gym and do some weights, although I was told not to do weights on consecutive days.

?

And I know what you mean, but I'm willing to do whatever is necessary. I need the self confidence, and fast :(

?

And I know what you mean, but I'm willing to do whatever is necessary. I need the self confidence, and fast :(

up your calorie intake -> pasta, nuts etc + protein shakes -> start off with simply getting fit, then start working out

<rant>

Like many have said, up your protein and calorie intake. You can work out 6 ways from Sunday all you want, but if your muscles have no energy or protein to rebuild themselves, you won't notice a difference. Here are some general tips for you, I hope they help.

As for exercises, the general rule of thumb is: heavy weight, low reps = mass building; moderate weight, high reps = toning, endurance. Some studies have come out recently that discredit this rule, but I've been using it for almost ten years now and it works pretty well for me.

You want to always give your muscles 2 days in between workouts to give them a chance to rebuild and recoop. And you can do more than one muscle group on the same day to make your workouts more varied and efficient. For instance, I usually do biceps and shoulders on Mondays and Thursdays; chest and back on Tuesdays and Fridays; Legs on Wednesdays and Saturdays.

I also have "heavy" and "light" days each week. "Heavy"/"Light" refer to the mass/endurance rule I mentioned above. So, week 1 I'll do a "heavy" workout on Mondays, Tuesdays, and Wednesdays; then "light" workouts the rest of the week. And week 2 will be the opposite.

You also want to constantly "confuse" your muscles by doing different exercises, in different orders, on different days. If you do the same routine over and over again, your muscles will literally grow accustomed to it and you'll plateau. Even simply changing the order of the same exercises will go a long way to increase results.

Form is also way more important than the amount of weight you do. If you concentrate on form, I guarantee you will see way better resutls faster than you would if you do as much weight or as many reps as you can. Which leads me to my last point...

The most important, and consequently the hardest, thing anyone must do when going to the gym is to get over yourself. Use the weight that is right for your current level or strength. Don't worry about how the guy next to you is benching 400 pounds. Too many times I've seen people new to the gym I go to try to impress or fit in or whatever, and put way too much weight on their machine. They end up doing awkward reps and doing a poor set. Not to mention they could seriously hurt themselves.

So good luck.

</rant>

I don't know how much bigger your going to get in 6 weeks

Maybe slightly more defined

Do as others have said and work your biceps & triceps

Work your shoulders also as nice round shoulders make arms look bigger

Any reason in particular you want just your arms bigger?

I'd recomend you go the the gym 4 times a week and focus on all your big excercises, Bench, squats, rows, military press & deadlift

I don't know how much bigger your going to get in 6 weeks

Maybe slightly more defined

Do as others have said and work your biceps & triceps

Work your shoulders also as nice round shoulders make arms look bigger

Any reason in particular you want just your arms bigger?

I'd recomend you go the the gym 4 times a week and focus on all your big excercises, Bench, squats, rows, military press & deadlift

I'd need to a visual difference to give me confidence first.

As recommended above, how about:

Biceps and shoulders on Mondays and Thursdays

Chest and back on Tuesdays and Fridays

Legs on Wednesdays and Saturday

Well your neglecting triceps

Your biceps also get worked when you do back, so they may still be sore when you attempt to do back the next day

Have a look around on bodybuilding websites, they'll offer a routine more suited to a new guy

Personally, i began with:

Back & Biceps

Chest & Triceps

Legs & Shoulders

With a day between each, and then repeat.?

If you're just starting to lift weights, you don't need to section off your workouts via muscle groups. Stick to lifting every other day, and on the days you aren't lifting, do cardio. Yes, cardio helps build muscle as well and keep you toned. I shouldn't talk, because I'm too lazy for cardio, but I never miss a lifting day. Start with some bench presses laying flat. By the way, the rule is, lift as much weight as you can that you are able to do 3 sets of 8 of them. So if you can bench 120lbs. 8 times, rest about 1 minute, another 8, rest, 8, then that's the weight you want. Never downscale weights. If anything, add on weight. Don't do 140lbs, 130lbs, 100lbs. Unless you are just beginning and learning your limits. But yeah, then do some dumbbell curls, like 25-35lbs on each arm about 12 times total, going left, right, left, right. Then try a few pushups. Key is to stay firm, don't rise your butt in the air, keep your body straight and level, and bring yourself down until your chest touches or almost touches the ground. Do 8-12 of those. You'll want to save your inclined press for last, at least I do, because it really tires me out. Put your bench at about a 45 degree angle and basically you'll "bench". But line the barbell up with your nipples. Sounds stupid but that is how you truly work your upper chest. Then do some shrugs...try holding a 35-45lbs dumbbell in each arm, letting it lay to the side, and shrug your shoulders in a circular motion. Do that about 16-24 times. Next if you want to work your legs, just use a leg press on a heavy amount of weight. To work your back, do some rowing. That will also target many other muscles. For abs, do crunches, do captains chair, etc.

Most importantly: Do not hurt yourself! Do not be afraid to start at a low weight. Some people have the genetics to lift heavy weight like a nut. I sure as hell did not. I had to work my way up to where I am at now and I am still nothing special. But I have improved immensely, and continue to do so. If you have time to do cardio on your off days, that is great. It will help with the fat to muscle conversion even in your other workouts. Good luck.

P.S. - Wow, I should truly seperate the above into paragraphs. Lolz.

do most of the things yorak said... and remember you aren't going to see a whole lot of difference in 6 weeks... you will certainly feel and be stronger but you won't see it as much because the muscles you have are just getting stronger and you aren't actually building more muscles for a while.

I am going to write assuming that you are going to do everything Yorak said... this is just additions it's not complete.

how many pushups can you do? if you can do more than 15-20 make sure you do them every day. you are strong enough where your pushups will only tune your muscles and won't actually be tearing tissue so you won't be "working out" every day. keep the heavy weights for every other day.

find a workout partner and do some negative lifting, these really did wonders for my muscle volume but didn't get me that much stronger... with negatives you basically find your max on any particular exercise and you add 5-10lbs to it then you lower the weight by yourself and have someone else help you push it up... lowering the weight should be done at a very slow steady pace, don't let it just drop.... after the weight is lowered your partner helps you bring it back up, this is more of a thrust than a push. you dont want to be pushing that much at all your partner should help a lot. do about 5-8 of these 3 sets. if you are doing more reps then increase the weight.

remember for muscle gaining you never want to do more than 5-8 reps.

eating habbits... you HAVE to change these or else you will max out at around week 4 and stop getting stronger. you NEED to eat a LOT when you are doing intense workouts... eat more than 3 meals a day and try to snack in between. you must eat a lot of proteins and forget about shakes and bars they are great but they are usually too much in one dose and your body just stores the protein as fat when it can't use it.

this past semester Spring 2008 I biked about 13 miles to my uni and 13 miles back. while i was there i went to the gym every other day and did a full upper body workout including core exercises... for that life style i was eating over 5000 calories a day and still felt weak some times and went to bed early. the point is when you workout a lot your muscles burn up energy like it's free gas at the pump. you want to make sure there are plenty of calories for your body to burn up so that it never burns your muscles as a source of calories. people often underestimate this step and don't eat enough because they are trying to lose weight at the same time and it just doesn't workout.... if you need any tips on exercises feel free to PM me and ask. I have been doing this stuff for years and know my way around a gym.

good luck, and give up on the 6 weeks. if you make it 16 we can talk...

I end up doing exercises where I believe there is a sort of "synergy" between exercises. For example, a lot of lat exercises utilise the biceps to an extent, or many chest exercises (benching) also uses the triceps. Below is the schedule I follow:

Day 1: Biceps, then back

Day 2: Chest, then triceps

Day 3: Abs, then legs

I also throw in shoulders and other various exercises here and there to spice things up, as well as adding some cardio before and/or after (before to get warmed up, or after to get blood flowing and reduce soreness).

The reason I do the muscle groups daily in that order is because some exercises, such as dumbbell flys for the chest have the most impact if the triceps are still fresh. If you have tired that muscle group out, you won't be reaching maximum potential.

Also, do make sure that you have plenty of protein. I personally don't go overboard, because I am not really that obsessed about bulking up (plus at 5' 6", any bigger and I'll start looking like a mini freak, lol). I typically have protein for breakfast found in oatmeal (some actually have a really decent content), lunch in the form of peanut butter, then right after the workout I have some hemp seed followed by a glass of soy milk. Then a short time after, I have a heavy protein dinner. I prefer to stay away from the protein crap one buys at body building stores because if I am making my body look good, I might as well feel good by reducing chemical crap. I am also vegan, but that has in no way stunted anything. In fact, I gained 10 pounds in the past 2 months alone (this dramatic increase happened right when I shifted from using machines to going to free weights).

One last thing, make sure you have lots of water. The muscles will hold a large portion of the water, so if you are dehydrated, they won't be at a maximum size potential, if that makes sense. Plus, water will help flush out crap, etc.

push-ups every day. The big advantage of push-ups: they exercise almost every muscle group of your body

umm... no, not everyday. your muscles need time to heal, and thus, grow larger.

push-ups work your chest, shoulders and triceps... and maybe your abs b/c of stabilization... but definitely not "almost every muscle group"

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hasleo Backup Suite Free 5.8.2.2 by Razvan Serea Hasleo Backup Suite Free is a free Windows backup and restore software, which embeds backup, restore and cloning features, it is designed for Windows operating system users and can be used on both Windows PCs and Servers. The backup and restore feature of Hasleo Backup Suite can help you back up and restore the Windows operating systems, disks, partitions and files (folders) to protect the security of your Windows operating system and personal data. The cloning feature of Hasleo Backup Suite can help you migrate Windows to another disk, or easily upgrade a disk to an SSD or a larger capacity disk. System Backup & Restore / Disk/Partition Backup & Restore Backup Windows operating system and boot-related partitions, including user settings, drivers and applications installed in these partitions, which ensures that you can quickly restore your Windows operating system once it crashes. Viruses, power failure, or other unknown reasons may cause data loss, so it is a good habit to regularly back up the drive that stores important files, you can at least recover lost files from the backup image files in the event of a disaster. System Clone / Disk Clone / Partition Clone Migrate the Windows operating system from one disk to another SSD or larger disk without reinstalling Windows, applications and drivers. Clone entire disk to another disk and ensure that the contents of the source disk and the destination disk are exactly the same. Clone a partition completely to the specified location on the current disk or another disk and ensure that the data will not be changed. File Backup & Restore Back up specified files(folders) instead of the entire drive to another location to protect your data, so you can quickly restore files(folders) from the backup image files when needed. Incremental/Differential/Full Backup Different backup modes are supported, you can flexibly choose data protection schemes, which can improve backup performance and save storage space while ensuring data security. Delta Restore Delta restore uses advanced delta detection technology to check the changed blocks on the destination drive and restore only the changed blocks, so it has a faster restore speed than the traditional full restore. Universal Restore This feature can help us restore the Windows operating system to computers with different hardware and ensure that Windows can work normally without any hardware compatibility issues. Hasleo Backup Suite 5.8.2.2 changelog: Improved creation of bootable media that supports the UEFI CA 2023 certificate Fixed an issue that caused system restore to fail Fixed an issue where file backup could not list drives under Windows ARM64 Fixed an issue that caused backup of MacOS files/folders shared via Samba to fail Fixed an issue that caused "Smart Backup" to not work properly Fixed other minor bugs Download: Hasleo Backup Suite 5.8.2.2 | 39.7 MB (Freeware) Links: Hasleo Backup Suite Website | Hasleo Backup Suite Guide | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Shotcut 26.6.25 by Razvan Serea Shotcut is a free, open source, cross-platform video editor for Windows, Mac and Linux. Major features include support for a wide range of formats; no import required meaning native timeline editing; Blackmagic Design support for input and preview monitoring; and resolution support to 4k. Editing Features Trimming on source clip player or timeline with ripple option Append, insert, overwrite, lift, and ripple delete editing on the timeline 3-point editing Hide, mute, and lock track controls Multitrack timeline with thumbnails and waveforms Unlimited undo and redo for playlist edits including a history view Create, play, edit, save, load, encode, and stream MLT XML projects (with auto-save) Save and load trimmed clip as MLT XML file Load and play complex MLT XML file as a clip Drag-n-drop files from file manager Scrubbing and transport control Video Effects Video compositing across video tracks HTML5 (sans audio and video) as video source and filters 3-way (shadows, mids, highlights) color wheels for color correction and grading Eye dropper tool to pick neutral color for white balancing Deinterlacing Auto-rotate Fade in/out audio and fade video from and to black with easy-to-use fader controls on timeline Video wipe transitions: bar, barn door, box, clock (radial), diagonal, iris, matrix, and custom gradient image Track compositing/blending modes: Over, Add, Saturate, Multiply, Screen, Overlay, Darken, Dodge, Burn, Hard Light, Soft Light, Difference, Exclusion, HSL Hue, HSL Saturation, HSL Color, HSL Luminosity. Video Filters: Alpha Channel: Adjust, Alpha Channel: View, Blur, Brightness, Chroma Key: Advanced, Chroma Key: Simple, Contrast, Color Grading, Crop, Diffusion, Glow, Invert Colors, Key Spill: Advanced, Key Spill: Simple, Mirror, Old Film: Dust, Old Film: Grain, Old Film: Projector, Old Film: Scratches, Old Film: Technocolor, Opacity, Rotate, Rutt-Etra-Izer, Saturation, Sepia Tone, Sharpen, Size and Position, Stabilize, Text, Vignette, Wave, White Balance Speed effect for audio/video clips Hardware Support Blackmagic Design SDI and HDMI for input and preview monitoring Leap Motion for jog/shuttle control Webcam capture Audio capture to system audio card Capture (record) SDI, HDMI, webcam (V4L2), JACK audio, PulseAudio, IP stream, X11 screen, and Windows DirectShow devices Multi-core parallel image processing (when not using GPU and frame-dropping is disabled) DeckLink SDI keyer output OpenGL GPU-based image processing with 16-bit floating point linear per color component Shotcut 26.6.25 changelog highlights: Added basic support for OpenFX (OFX) video plugins. Added VST2 audio plugin support for third-party audio effects. Added Safe Mode to launch Shotcut without external plugins for easier crash recovery. Added an experimental plugin UI generator (--experimental) for supported filters and plugins. Added a new Noise Reduction audio filter powered by RNNoise. Added HDR export support. Added PQ HDR metadata options for HDR exports. Added the ability to view HDR previews in full-screen mode. Improved Vulkan display support on Linux. Fixed DeckLink and UltraStudio external monitor deadlocks. Fixed Opus audio export warnings related to frame_duration. Improved plugin discovery and compatibility for supported OpenFX and VST2 plugins. Expanded command-line options for testing experimental features. Improved overall application stability when using third-party plugins. Enhanced HDR editing and preview workflow. Included numerous bug fixes, performance optimizations, and general stability improvements throughout the application.[full release notes] Download: Shotcut 26.6.25 | Portable | ARM64 ~200.0 MB (Open Source) View: Shotcut Home Page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I looked into a few echo devices to find they were riddled with adverts over time. No thanks ill stick to my homeassistant, smart plugs, smart bulbs and cameras that don't cost me a monthly fee and are cheaper to buy. No adverts also.
    • Brave Browser 1.91.180 is out.
    • Putin or Farage had nothing to do with me voting out. I did so because I got fed up of the E.U telling us what we could and could not do. Fed up with our country being run by a load of unelected Europrats. We never joined the E.U in the first place.
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      503
    2. 2
      +Edouard
      229
    3. 3
      PsYcHoKiLLa
      163
    4. 4
      Steven P.
      77
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!