Want to increase my arm size in 6 weeks - any tips?


Recommended Posts

I am a skinny bloke (6'3'', 10st 10) and want to make my arms as large as possible in six weeks. I am happy to go to the gym everyday if need be.

Do you have any tips? (e.g. what to eat, when to eat, exercises etc.)

Check rappehs thread in 'the forum'?

But yeah, I'd head to the gym and do some weights, although I was told not to do weights on consecutive days.

?

And I know what you mean, but I'm willing to do whatever is necessary. I need the self confidence, and fast :(

?

And I know what you mean, but I'm willing to do whatever is necessary. I need the self confidence, and fast :(

up your calorie intake -> pasta, nuts etc + protein shakes -> start off with simply getting fit, then start working out

<rant>

Like many have said, up your protein and calorie intake. You can work out 6 ways from Sunday all you want, but if your muscles have no energy or protein to rebuild themselves, you won't notice a difference. Here are some general tips for you, I hope they help.

As for exercises, the general rule of thumb is: heavy weight, low reps = mass building; moderate weight, high reps = toning, endurance. Some studies have come out recently that discredit this rule, but I've been using it for almost ten years now and it works pretty well for me.

You want to always give your muscles 2 days in between workouts to give them a chance to rebuild and recoop. And you can do more than one muscle group on the same day to make your workouts more varied and efficient. For instance, I usually do biceps and shoulders on Mondays and Thursdays; chest and back on Tuesdays and Fridays; Legs on Wednesdays and Saturdays.

I also have "heavy" and "light" days each week. "Heavy"/"Light" refer to the mass/endurance rule I mentioned above. So, week 1 I'll do a "heavy" workout on Mondays, Tuesdays, and Wednesdays; then "light" workouts the rest of the week. And week 2 will be the opposite.

You also want to constantly "confuse" your muscles by doing different exercises, in different orders, on different days. If you do the same routine over and over again, your muscles will literally grow accustomed to it and you'll plateau. Even simply changing the order of the same exercises will go a long way to increase results.

Form is also way more important than the amount of weight you do. If you concentrate on form, I guarantee you will see way better resutls faster than you would if you do as much weight or as many reps as you can. Which leads me to my last point...

The most important, and consequently the hardest, thing anyone must do when going to the gym is to get over yourself. Use the weight that is right for your current level or strength. Don't worry about how the guy next to you is benching 400 pounds. Too many times I've seen people new to the gym I go to try to impress or fit in or whatever, and put way too much weight on their machine. They end up doing awkward reps and doing a poor set. Not to mention they could seriously hurt themselves.

So good luck.

</rant>

I don't know how much bigger your going to get in 6 weeks

Maybe slightly more defined

Do as others have said and work your biceps & triceps

Work your shoulders also as nice round shoulders make arms look bigger

Any reason in particular you want just your arms bigger?

I'd recomend you go the the gym 4 times a week and focus on all your big excercises, Bench, squats, rows, military press & deadlift

I don't know how much bigger your going to get in 6 weeks

Maybe slightly more defined

Do as others have said and work your biceps & triceps

Work your shoulders also as nice round shoulders make arms look bigger

Any reason in particular you want just your arms bigger?

I'd recomend you go the the gym 4 times a week and focus on all your big excercises, Bench, squats, rows, military press & deadlift

I'd need to a visual difference to give me confidence first.

As recommended above, how about:

Biceps and shoulders on Mondays and Thursdays

Chest and back on Tuesdays and Fridays

Legs on Wednesdays and Saturday

Well your neglecting triceps

Your biceps also get worked when you do back, so they may still be sore when you attempt to do back the next day

Have a look around on bodybuilding websites, they'll offer a routine more suited to a new guy

Personally, i began with:

Back & Biceps

Chest & Triceps

Legs & Shoulders

With a day between each, and then repeat.?

If you're just starting to lift weights, you don't need to section off your workouts via muscle groups. Stick to lifting every other day, and on the days you aren't lifting, do cardio. Yes, cardio helps build muscle as well and keep you toned. I shouldn't talk, because I'm too lazy for cardio, but I never miss a lifting day. Start with some bench presses laying flat. By the way, the rule is, lift as much weight as you can that you are able to do 3 sets of 8 of them. So if you can bench 120lbs. 8 times, rest about 1 minute, another 8, rest, 8, then that's the weight you want. Never downscale weights. If anything, add on weight. Don't do 140lbs, 130lbs, 100lbs. Unless you are just beginning and learning your limits. But yeah, then do some dumbbell curls, like 25-35lbs on each arm about 12 times total, going left, right, left, right. Then try a few pushups. Key is to stay firm, don't rise your butt in the air, keep your body straight and level, and bring yourself down until your chest touches or almost touches the ground. Do 8-12 of those. You'll want to save your inclined press for last, at least I do, because it really tires me out. Put your bench at about a 45 degree angle and basically you'll "bench". But line the barbell up with your nipples. Sounds stupid but that is how you truly work your upper chest. Then do some shrugs...try holding a 35-45lbs dumbbell in each arm, letting it lay to the side, and shrug your shoulders in a circular motion. Do that about 16-24 times. Next if you want to work your legs, just use a leg press on a heavy amount of weight. To work your back, do some rowing. That will also target many other muscles. For abs, do crunches, do captains chair, etc.

Most importantly: Do not hurt yourself! Do not be afraid to start at a low weight. Some people have the genetics to lift heavy weight like a nut. I sure as hell did not. I had to work my way up to where I am at now and I am still nothing special. But I have improved immensely, and continue to do so. If you have time to do cardio on your off days, that is great. It will help with the fat to muscle conversion even in your other workouts. Good luck.

P.S. - Wow, I should truly seperate the above into paragraphs. Lolz.

do most of the things yorak said... and remember you aren't going to see a whole lot of difference in 6 weeks... you will certainly feel and be stronger but you won't see it as much because the muscles you have are just getting stronger and you aren't actually building more muscles for a while.

I am going to write assuming that you are going to do everything Yorak said... this is just additions it's not complete.

how many pushups can you do? if you can do more than 15-20 make sure you do them every day. you are strong enough where your pushups will only tune your muscles and won't actually be tearing tissue so you won't be "working out" every day. keep the heavy weights for every other day.

find a workout partner and do some negative lifting, these really did wonders for my muscle volume but didn't get me that much stronger... with negatives you basically find your max on any particular exercise and you add 5-10lbs to it then you lower the weight by yourself and have someone else help you push it up... lowering the weight should be done at a very slow steady pace, don't let it just drop.... after the weight is lowered your partner helps you bring it back up, this is more of a thrust than a push. you dont want to be pushing that much at all your partner should help a lot. do about 5-8 of these 3 sets. if you are doing more reps then increase the weight.

remember for muscle gaining you never want to do more than 5-8 reps.

eating habbits... you HAVE to change these or else you will max out at around week 4 and stop getting stronger. you NEED to eat a LOT when you are doing intense workouts... eat more than 3 meals a day and try to snack in between. you must eat a lot of proteins and forget about shakes and bars they are great but they are usually too much in one dose and your body just stores the protein as fat when it can't use it.

this past semester Spring 2008 I biked about 13 miles to my uni and 13 miles back. while i was there i went to the gym every other day and did a full upper body workout including core exercises... for that life style i was eating over 5000 calories a day and still felt weak some times and went to bed early. the point is when you workout a lot your muscles burn up energy like it's free gas at the pump. you want to make sure there are plenty of calories for your body to burn up so that it never burns your muscles as a source of calories. people often underestimate this step and don't eat enough because they are trying to lose weight at the same time and it just doesn't workout.... if you need any tips on exercises feel free to PM me and ask. I have been doing this stuff for years and know my way around a gym.

good luck, and give up on the 6 weeks. if you make it 16 we can talk...

I end up doing exercises where I believe there is a sort of "synergy" between exercises. For example, a lot of lat exercises utilise the biceps to an extent, or many chest exercises (benching) also uses the triceps. Below is the schedule I follow:

Day 1: Biceps, then back

Day 2: Chest, then triceps

Day 3: Abs, then legs

I also throw in shoulders and other various exercises here and there to spice things up, as well as adding some cardio before and/or after (before to get warmed up, or after to get blood flowing and reduce soreness).

The reason I do the muscle groups daily in that order is because some exercises, such as dumbbell flys for the chest have the most impact if the triceps are still fresh. If you have tired that muscle group out, you won't be reaching maximum potential.

Also, do make sure that you have plenty of protein. I personally don't go overboard, because I am not really that obsessed about bulking up (plus at 5' 6", any bigger and I'll start looking like a mini freak, lol). I typically have protein for breakfast found in oatmeal (some actually have a really decent content), lunch in the form of peanut butter, then right after the workout I have some hemp seed followed by a glass of soy milk. Then a short time after, I have a heavy protein dinner. I prefer to stay away from the protein crap one buys at body building stores because if I am making my body look good, I might as well feel good by reducing chemical crap. I am also vegan, but that has in no way stunted anything. In fact, I gained 10 pounds in the past 2 months alone (this dramatic increase happened right when I shifted from using machines to going to free weights).

One last thing, make sure you have lots of water. The muscles will hold a large portion of the water, so if you are dehydrated, they won't be at a maximum size potential, if that makes sense. Plus, water will help flush out crap, etc.

push-ups every day. The big advantage of push-ups: they exercise almost every muscle group of your body

umm... no, not everyday. your muscles need time to heal, and thus, grow larger.

push-ups work your chest, shoulders and triceps... and maybe your abs b/c of stabilization... but definitely not "almost every muscle group"

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Russia was able to invade Crimea because of those people. But my point is that I've personally heard how great it was to be "back in Russia" right afterwards - look how great it is now. I've asked you a question in another comment which you haven't answered, so I'll ask it again: is it better now without "Europrats"?
    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • It's in the Insider's group so yes it's technically beta, though these days it's hard to see much of a difference unless you opt for the most extreme beta builds, which I don't. When I moved here from the Release Preview channel I did so primarily because I wanted to see how well the restored taskbar functionality (restored from Win10, and earlier) is working and whether it was time to finally abandon SAB--and it is--working fine, so far. Not as polished as SAB, but it'll do for me.
    • I've been using MWB Premium for a number of years so that along with Windows updates and updated browser should be fine. Thanks for that.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +Edouard
      222
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!