Want to increase my arm size in 6 weeks - any tips?


Recommended Posts

<rant>

Like many have said, up your protein and calorie intake. You can work out 6 ways from Sunday all you want, but if your muscles have no energy or protein to rebuild themselves, you won't notice a difference. Here are some general tips for you, I hope they help.

As for exercises, the general rule of thumb is: heavy weight, low reps = mass building; moderate weight, high reps = toning, endurance. Some studies have come out recently that discredit this rule, but I've been using it for almost ten years now and it works pretty well for me.

You want to always give your muscles 2 days in between workouts to give them a chance to rebuild and recoop. And you can do more than one muscle group on the same day to make your workouts more varied and efficient. For instance, I usually do biceps and shoulders on Mondays and Thursdays; chest and back on Tuesdays and Fridays; Legs on Wednesdays and Saturdays.

I also have "heavy" and "light" days each week. "Heavy"/"Light" refer to the mass/endurance rule I mentioned above. So, week 1 I'll do a "heavy" workout on Mondays, Tuesdays, and Wednesdays; then "light" workouts the rest of the week. And week 2 will be the opposite.

You also want to constantly "confuse" your muscles by doing different exercises, in different orders, on different days. If you do the same routine over and over again, your muscles will literally grow accustomed to it and you'll plateau. Even simply changing the order of the same exercises will go a long way to increase results.

Form is also way more important than the amount of weight you do. If you concentrate on form, I guarantee you will see way better resutls faster than you would if you do as much weight or as many reps as you can. Which leads me to my last point...

The most important, and consequently the hardest, thing anyone must do when going to the gym is to get over yourself. Use the weight that is right for your current level or strength. Don't worry about how the guy next to you is benching 400 pounds. Too many times I've seen people new to the gym I go to try to impress or fit in or whatever, and put way too much weight on their machine. They end up doing awkward reps and doing a poor set. Not to mention they could seriously hurt themselves.

So good luck.

</rant>

The most sensible and correct post ive seen on fitness on Neowin yet. Thank you (Y)

to elaborate further, it's not about how much weight you can do but whether or not youre doing the exercise correctly. 80% of the people i see at the gym are doing exercises wrong. They'll shift their bodies and cheat to get that massive weight up.

a good example is biceps exercises... i consistently see people pulling their elbows forward when doing biceps curls. your elbows need to stay stationary. if you cant do this, then you're using too much weight. biceps pull straight up just like any other muscle... you need to concentrate on pulling your arm UP instead of in a semi-circle/curve.

my point is: keep the amount of weight down until you can do the exercise 100% correct. while doing the exercise, you need to concentrate on what your target muscle is actually doing... not the motion of the weight you're lifting. 80% brain, 20% weight.

I end up doing exercises where I believe there is a sort of "synergy" between exercises. For example, a lot of lat exercises utilise the biceps to an extent, or many chest exercises (benching) also uses the triceps. Below is the schedule I follow:

Day 1: Biceps, then back

Day 2: Chest, then triceps

Day 3: Abs, then legs

not bad, but i have to disagree w/ Day 1. Back exercises are very strenuous and, sadly, require a lot of your biceps. if you did that combination, i'd suggest you flip them... do back first, then kill your biceps.

my rotation is:

1. chest

2. back

3. shoulders/traps

4. biceps/triceps

Then i throw in abs and legs on various days

Well for starters, you gotta eat right. Right is, lots of proteins.

Working your arms everyday is not smart, unless you alternate the muscles, like the biceps on day1 and triceps day2, forearms day2, etc.

Heavy is the only way. I usually do my exercises in 4 sets of 8-8-8-6 repetitions. Its a rule of thumb, if you can lift a weight 8 times but you feel you can do more, it's not heavy enough. For example for the biceps, I'll do the zottman curls with 25lbs dumbbells, then 30 for the next 2 sets and 35 for the last where I'm maxed out. Same thing with the preacher curl, and so on.

Different patterns are effective too. I know some who like to do more sets, and it's done in a pyramid fashion, start with low, then raise the weight til you're at your near max, then come back down to what you started.

If you also happen to do chin ups, try weighted chin ups. They do wonders for biceps and forearms.. These with weighted pull ups are among my fav exercises :D

29dae5d.jpg

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Why it's almost impossible to produce a smartphone in the United States by Hamid Ganji If you look at the back of some Apple products, you can see the famous phrase “Designed by Apple in California, Assembled in China.” This phrase appears on products from one of the largest smartphone brands in the United States. These products are designed in the U.S., but their manufacturing takes place in China, India, Vietnam, or even Brazil. But why can’t Apple, as one of the largest American tech companies, produce its iPhones on U.S. soil? The idea for this topic came to me after the Trump Foundation launched a smartphone called the T1 and claimed that it was designed and built with American values in mind. However, this claim did not last long, as it was revealed that Trump’s phone was actually a rebranded HTC U24 Pro, with only a gold case and minor internal component changes. You see? Even a phone that is supposed to represent American values is manufactured in China. With a gross domestic product (GDP) exceeding $32 trillion, the United States is currently the world’s largest economy, while China ranks second with around $20 trillion. On the other hand, the United States is by a wide margin the global leader in various technological fields, and American companies spend hundreds of billions of dollars annually on research and development. From Apple and Google to Microsoft, Lockheed Martin, Boeing, and others, American tech and industrial giants lead their foreign competitors in many sectors. The United States also has no shortage of smartphone brands. Apple, Google, and Motorola are among the major brands in the smartphone market, collectively holding a significant share. However, the vast majority of their products are manufactured outside the United States. So why is it that the world’s largest economy, home to the most advanced technology companies and industrial powers, cannot produce a smartphone on its own soil? Let’s explore this question together. Even threats to impose tariffs won’t work After Trump entered the White House as the 47th President of the United States, his administration adopted strict tariff policies. One of these policies was the imposition of a 25% tariff on smartphones manufactured outside the United States. Trump said he “had a little problem” with Apple CEO Tim Cook over producing smartphones outside the U.S. So he thought that threatening a 25% tax on imported phones might force Apple to bring manufacturing back to the United States. “I have long ago informed Tim Cook of Apple that I expect their iPhones that will be sold in the United States of America will be manufactured and built in the United States, not India, or anyplace else,” Trump wrote on Truth Social. Image via The White House Although Apple currently manufactures some of the iPhone’s chips in the United States with TSMC's help, it still shows no willingness to shift full iPhone production to the country. At the time, renowned Apple supply chain analyst Ming-Chi Kuo wrote on X, “In terms of profitability, it’s way better for Apple to take the hit of a 25% tariff on iPhones sold in the US market than to move iPhone assembly lines back to the US.” However, manufacturing a smartphone in the United States is not as easy as it might seem, and many technical and economic barriers are involved. The lack of necessary manufacturing hubs There is a clear reason why many companies prefer to manufacture their products in China. China has established itself as the main global manufacturing hub for international companies, and over the past few decades, large contract manufacturers have emerged there, allowing companies like Apple to outsource production. One such example is Foxconn, which also manufactures some Apple products in India. Building the infrastructure required to produce smartphones in the United States would require tens of billions of dollars in new investment. Factories would need to be built, essential manufacturing equipment would have to be installed, and, most importantly, a skilled workforce capable of operating these systems would need to be recruited and trained. The United States currently lacks the core infrastructure needed to manufacture smartphones, and for this reason, many companies prefer to outsource production to Chinese contractors rather than spend tens of billions of dollars to build that infrastructure, which is significantly more economically efficient. Additionally, building such infrastructure in the United States could take up to a decade, ultimately leading to a significant increase in the product's final price for consumers. Shortage of trained labor in the U.S. compared to China Decades of serving as a global manufacturing hub have allowed China to build a massive talent pool in the production sector that is almost unmatched worldwide. Today, if a company chooses to manufacture its products in China, it can be confident that the workers involved in production have years of experience in their respective roles and are capable of producing high-quality goods with minimal errors. Even if we assume that tens of billions of dollars were invested in building smartphone manufacturing infrastructure in the United States, finding skilled workers would remain highly challenging. Apple CEO Tim Cook visiting the iPhone 6 assembly line in China in 2014. Image: Tim Cook on X In a 2015 interview on CBS’s 60 Minutes, Tim Cook said the main reason Apple isn’t producing in the US is a lack of skills. "China put an enormous focus on manufacturing, in what you and I would call vocational kind of skills. The US over time began to stop having as many vocational kinds of skills. I mean you could take every tool and die maker in the United States and probably put them in the room that we're currently sitting in. In China you would have to have multiple football fields,” Cook said. Also, in 2017, at the Fortune Global Forum in Guangzhou, Cook once again emphasized the importance of highly skilled Chinese workers. “China has moved into very advanced manufacturing, so you find in China the intersection of craftsman kind of skill, and sophisticated robotics and the computer science world. That intersection, which is very rare to find anywhere, that kind of skill, is very important to our business because of the precision and quality level that we like. The thing that most people focus on if they’re a foreigner coming to China is the size of the market, and obviously, it’s the biggest market in the world in so many areas. But for us, the number one attraction is the quality of the people,” Apple CEO said. Higher labor costs in the United States Producing almost any product in the United States is more expensive than in many other countries, and one of the main reasons is the higher cost of labor in the U.S. According to the Bureau of Labor Statistics, median weekly earnings of full-time workers in the United States were $1,235 in the first quarter of 2026. Meanwhile, the average annual salary in China's private sector in 2025 was RMB 71,590 (US$9,961). In many parts of the world, the weekly wage of an American worker is equivalent to several months of income. Another important factor to consider is that in the United States, the workforce capable of working on a smartphone assembly line is highly specialized and therefore commands higher-than-average wages. According to an estimate by Bank of America, producing an iPhone in the U.S. is technically possible, but “iPhone cost can increase 25% purely on higher labor cost in the U.S.” However, this 25% increase applies only if final assembly is performed in the United States while components are still sourced from China or elsewhere. In this case, the price of a base iPhone would rise from $799 to around $1,000. But in another scenario, if Apple were to produce the required components for the iPhone within the United States, production costs could increase by more than 90%. Trump’s dream for a “Made in the USA” iPhone might never come true In a free-market capitalist economy, one of the primary responsibilities of any CEO is to maximize profit. Using Apple as an example, Tim Cook’s role is to maximize the company’s profits so that it can fund research and development for new products and invest in areas such as artificial intelligence, while also keeping shareholders satisfied. Therefore, it is entirely understandable that Apple would choose not to bring its manufacturing back to the United States and instead keep production in countries where labor is cheaper, and products can be manufactured at a lower cost, thereby maximizing its profit margins. What is your opinion about manufacturing smartphones in the United States? If you are an American citizen, would you be willing to pay hundreds of dollars more for a smartphone made domestically in the USA? Let us know in the comments.
    • Cheers everyone for the replies. It's been very useful. 👍
    • Compared to the 7735HS it is around 25-30% slower in multi-threaded tasks (according to Google search) I did a review of the 7735HS Beelink SER6 Max in 2023, but thinking about it, it's not comparable to the 7730U. For the example you gave about how it will be used, the 7730U is actually an excellent choice for its power and battery efficiency.
  • Recent Achievements

    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      503
    2. 2
      +Edouard
      194
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      71
    5. 5
      FloatingFatMan
      67
  • Tell a friend

    Love Neowin? Tell a friend!