Want to increase my arm size in 6 weeks - any tips?


Recommended Posts

<rant>

Like many have said, up your protein and calorie intake. You can work out 6 ways from Sunday all you want, but if your muscles have no energy or protein to rebuild themselves, you won't notice a difference. Here are some general tips for you, I hope they help.

As for exercises, the general rule of thumb is: heavy weight, low reps = mass building; moderate weight, high reps = toning, endurance. Some studies have come out recently that discredit this rule, but I've been using it for almost ten years now and it works pretty well for me.

You want to always give your muscles 2 days in between workouts to give them a chance to rebuild and recoop. And you can do more than one muscle group on the same day to make your workouts more varied and efficient. For instance, I usually do biceps and shoulders on Mondays and Thursdays; chest and back on Tuesdays and Fridays; Legs on Wednesdays and Saturdays.

I also have "heavy" and "light" days each week. "Heavy"/"Light" refer to the mass/endurance rule I mentioned above. So, week 1 I'll do a "heavy" workout on Mondays, Tuesdays, and Wednesdays; then "light" workouts the rest of the week. And week 2 will be the opposite.

You also want to constantly "confuse" your muscles by doing different exercises, in different orders, on different days. If you do the same routine over and over again, your muscles will literally grow accustomed to it and you'll plateau. Even simply changing the order of the same exercises will go a long way to increase results.

Form is also way more important than the amount of weight you do. If you concentrate on form, I guarantee you will see way better resutls faster than you would if you do as much weight or as many reps as you can. Which leads me to my last point...

The most important, and consequently the hardest, thing anyone must do when going to the gym is to get over yourself. Use the weight that is right for your current level or strength. Don't worry about how the guy next to you is benching 400 pounds. Too many times I've seen people new to the gym I go to try to impress or fit in or whatever, and put way too much weight on their machine. They end up doing awkward reps and doing a poor set. Not to mention they could seriously hurt themselves.

So good luck.

</rant>

The most sensible and correct post ive seen on fitness on Neowin yet. Thank you (Y)

to elaborate further, it's not about how much weight you can do but whether or not youre doing the exercise correctly. 80% of the people i see at the gym are doing exercises wrong. They'll shift their bodies and cheat to get that massive weight up.

a good example is biceps exercises... i consistently see people pulling their elbows forward when doing biceps curls. your elbows need to stay stationary. if you cant do this, then you're using too much weight. biceps pull straight up just like any other muscle... you need to concentrate on pulling your arm UP instead of in a semi-circle/curve.

my point is: keep the amount of weight down until you can do the exercise 100% correct. while doing the exercise, you need to concentrate on what your target muscle is actually doing... not the motion of the weight you're lifting. 80% brain, 20% weight.

I end up doing exercises where I believe there is a sort of "synergy" between exercises. For example, a lot of lat exercises utilise the biceps to an extent, or many chest exercises (benching) also uses the triceps. Below is the schedule I follow:

Day 1: Biceps, then back

Day 2: Chest, then triceps

Day 3: Abs, then legs

not bad, but i have to disagree w/ Day 1. Back exercises are very strenuous and, sadly, require a lot of your biceps. if you did that combination, i'd suggest you flip them... do back first, then kill your biceps.

my rotation is:

1. chest

2. back

3. shoulders/traps

4. biceps/triceps

Then i throw in abs and legs on various days

Well for starters, you gotta eat right. Right is, lots of proteins.

Working your arms everyday is not smart, unless you alternate the muscles, like the biceps on day1 and triceps day2, forearms day2, etc.

Heavy is the only way. I usually do my exercises in 4 sets of 8-8-8-6 repetitions. Its a rule of thumb, if you can lift a weight 8 times but you feel you can do more, it's not heavy enough. For example for the biceps, I'll do the zottman curls with 25lbs dumbbells, then 30 for the next 2 sets and 35 for the last where I'm maxed out. Same thing with the preacher curl, and so on.

Different patterns are effective too. I know some who like to do more sets, and it's done in a pyramid fashion, start with low, then raise the weight til you're at your near max, then come back down to what you started.

If you also happen to do chin ups, try weighted chin ups. They do wonders for biceps and forearms.. These with weighted pull ups are among my fav exercises :D

29dae5d.jpg

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AltSendme 0.4.2 is out.
    • Simple answer is yes, you will still get the Windows updates and as long as browser is up to date, you will be good. Only thing secure boot does is protect you against boot level threats and make it harder to install other OS's. I've been looking into this pretty thoroughly lately myself as wifes computer has secure boot disabled plus my other, older computers that run Linux, don't have secure boot enabled. Have seen all kinds of questions about this on the Linux Mint and MX Linux forums. Just don't suddenly enable secure boot now.
    • How many other companies will follow Ford's lead? Or, have they already gotten lazy and become enslaved to AI--and now can't figure out how to get out of that mess.
    • Why would any self-respecting intelligent person follow any recommendation by Donald's GOP administration? With almost two years of fabrications, deceit, and blatantly illegal behavior, why believe them now? They had best be gone after the November 2026 election, so we'll wait and see.
    • AltSendme 0.4.2 by Razvan Serea AltSendme is a minimal, cross-platform application designed for fast, secure, and private peer-to-peer file transfers. It allows users to send files or entire directories directly between devices without relying on cloud servers, accounts, or any personal information. Everything is encrypted end-to-end using modern protocols like QUIC and TLS 1.3, ensuring both strong security and low-latency performance. Transfers are verified with BLAKE3 for data integrity, and interrupted downloads automatically resume, making the experience reliable even on unstable connections. You can transfer anything—images, videos, documents, and more. Integrity checks are performed on both ends, so your files are automatically verified for correctness during both sending and receiving. AltSendme works seamlessly across local networks or long-distance links, capable of saturating multi-gigabit connections for extremely fast delivery. With built-in NAT traversal and encrypted relay fallback, it connects devices almost anywhere. The app integrates with the Sendme CLI and will soon support mobile and web platforms. Fully free and open-source, AltSendme offers a lightweight, privacy-first alternative to traditional cloud-based services, removing size limits, upload costs, and unnecessary data exposure. AltSendme 0.4.1 changelog: Release Highlights Self-hosted relays: Run your own iroh relay so transfers don't rely on public infrastructure. Includes a full deployment template in deploy/relay/ with Docker Compose for a VPS and configuration examples for production use. Fly.io support: One-click deploy template for Fly.io, including a quick-start config (fly.dev.toml) for testing without a custom domain, plus production setup with Let's Encrypt and your own hostname. Relay settings UI: New Settings → Network panel to choose how AltSendme connects: automatic public relays, custom self-hosted URLs (with optional auth token), or disabled. Test connections, verify latency, and see live relay status in the footer. Disable relays: Turn off relay servers entirely when you only need same-network transfers (e.g. LAN). Direct connections only. No relay hop required when devices can reach each other. Android graduates from beta: Android is now part of the regular release cycle alongside desktop. APKs ship with each version (universal, arm64, and armv7). Other improvements Private relay access control via shared auth token Relay fallback notifications when a custom relay is unreachable Broadcast mode toggle in sharing settings Android release build fixes (split-per-ABI APKs, universal APK preservation) UI polish: mobile safe-area insets, dropzone layout, transfer progress animation Bug fixes for minification-related serialization issues and system tray icon loading What's Changed feat(relay): add relay status functionality and settings UI (a120cdf) feat(relay): implement custom relay server configuration and verification (51276c7) feat(relay): add configuration for private relay access and enhance observability features (48fbabf) feat(relay): enhance relay URL validation, display connection status (d4fffa0) feat(relay): add RelayChangeGuard component and enhance relay-related translations (16ba514) feat(broadcast): add toggle setting for broadcast mode in sharing UI (ca6d977) fix(relay): correct QUIC discovery port, pin image, templatize fly.dev (52a2ba5) fix: More broken serialization due to minification (67491a9) fix(android): preserve true universal APK across per-ABI builds (e9f256f) fix(ui): conditional safe-area insets padding on mobile (1182f0e) refactor(transfer): CircularRing component animation fix (944572b) chore(android): drop x86 and x86_64 release APKs, keep universal+arm64+armv7 (34ada0b) AltSendme 0.4.2 release highlight: Modern Debian & Ubuntu support. The .deb package now declares compatible dependency alternatives (libayatana-appindicator3-1, libgtk-3-0t64) alongside the older Ubuntu 22.04 names, so it installs cleanly on Debian and Ubuntu 24.04+. Fixed settings sidebar header being covered by the custom title bar on Linux. What's Changed #172 Fixed #168 Addressed feat(tauri): support for modern debian (80f548d) fix(setting-sidebar): linux-only custom title bar covering nav header (fb55c9d) Download: AltSendme 0.4.2 | ARM64 | ~9.0 MB (Open Source) Download: AltSendme for MacOS | Android Links: AltSendme Home Page | GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      494
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      149
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!