• 0

Use Vista32 Key with Vista32 SP1 disk?


Question

I hope this is the right place to ask this.

My gf's HP laptop is freezing constantly, and no anti-virus or malware scans (even boot-time) seem to permanently clean/fix it. Its collected tons of junk since she first got it anyway and the best solution would be a nice fresh format.

Its running Vista Home Premium 32-bit, with the serial key on the genuine sticker on the laptop as usual, but she lost the original Vista installation disk and the other HP backup disks.

I haven't been able to get a hold of an original Vista32 Home Premium cd, but I do have a Vista Home Premium SP1 32-bit that came with my laptop.

Before i do a format on her pc though id like to know if her genuine key would work with my SP1 cd, or if there's a legit way of obtaining another copy an original Vista32 home premium disk without having to buy it all over again. Obviously we still have the key from the original purchase and just need a cd to install it with.

Thanks in advance,

Pierre-Eric

17 answers to this question

Recommended Posts

  • 0
Wait, is your copy of Vista OEM or not? Because OEM keys only work on OEM CDs, and Retail keys only work on Retail CDs.

A Vista key is a Vista Key doesnt matter whether it is OEM VLM or Retail same goes for 32 and 64 bit. What your talking about is from Windows XP Vista doesnt have those limitations

Just another plus is you can take a Vista Hard Drive out of a dead PC hook it up to a new PC and it will install the correct drivers vs XP that will Blue Screen

  • 0

Being from HP and Dell respectively, id assume they are both OEM disks.

My concern with just going ahead and trying the vista key with the vista SP1 cd is that if it doesnt work then she'll be left with a non-functional laptop if the key-entering part is after the format part (i dont remember the order in the setup), unless i put linux on there :p

Thanks for the replies

  • 0

Yeah..just try it. I am pretty sure it will still work. If your laptop is crashing so much, it could be hardware also. I was dealing with a friends laptop and it kept crashing even after re-installs..turned out the WiFi card was going bad and causing issues. Had to send the whole laptop in...

  • 0
Vista and Vista SP1 are completely different, and require different keys. The key you get for let's say, Vista OEM will not work on a Vista Retail (SP1).

Are you sure? From what I understand all Vista discs are identical, and all versions come on one DVD (except for the 64-bit versions which are a seperate disc). You can use any key with any disc as long as it's a valid key. The type of key determines the version of Vista that gets installed. I can't imagine them making SP1 discs incompatible with existing keys; at least I hadn't heard anything about that.

  • 0

Had no problems using my Vista x64 OEM key with a Vista x64 + SP1 dvd. The disc used for the reinstall was burned from the images released on MSDN, those are retail discs as best I understand.

Indeed my non-expert understanding is that retail and OEM differ only in the licenses you get but otherwise are the same discs and keys.

  • 0
Vista and Vista SP1 are completely different, and require different keys. The key you get for let's say, Vista OEM will not work on a Vista Retail (SP1).

That's totally wrong! (N).

Her original key will work with the Vista Home Premium SP1 disk, period.

  • 0

I found some screenshots of the installation process and the key entering part is definitely before the format (which makes sense i just had to make sure)

Im going to go ahead and try it with my SP1 cd and her key, and report my findings. Thanks a lot for all the feedback

  • 0

1) Windows Vista OEM Pack and Retail Pack differ and thus their product keys also differ. A product key for OEM 'might' not work for Retail, and vice versa.

2) Vista SP1 disc accepts Vista non-SP1 keys.

3) For a check, you could always run the Vista installer (just the initial dialogs), put the key, if you get accepted then it works :cool: , else it doesnt :unsure:

(Note that, I have used 'might')

  • 0
Vista and Vista SP1 are completely different, and require different keys. The key you get for let's say, Vista OEM will not work on a Vista Retail (SP1).

That's incorrect. Vista SP1 is just an upgrade of Vista RTM, it is not in fact a different operating system. A Vista SP1 CD is only Vista w/SP1 slipstreamed on it straight from Microsoft, nothing else. When you purchase Vista today, you will get an SP1 copy (depending on where you purchase it).

OEM and Retail are different though. If you have an product key sticker on your computer than the CD that came with your computer is an OEM CD. If you purchased a custom computer, or if you just bought Vista CD with product key, it will be retail. OEM keys will not work with Retail CDs, and vice versa.

  • 0

Why don't you call hp and order the cd and backup cd's for it? You might have to pay something but if the laptop is worth it they do it. I don't know if they charge or not but I would at least call and try.

HP ordering a recovery cd

:D :)

I hope this is the right place to ask this.

My gf's HP laptop is freezing constantly, and no anti-virus or malware scans (even boot-time) seem to permanently clean/fix it. Its collected tons of junk since she first got it anyway and the best solution would be a nice fresh format.

Its running Vista Home Premium 32-bit, with the serial key on the genuine sticker on the laptop as usual, but she lost the original Vista installation disk and the other HP backup disks.

I haven't been able to get a hold of an original Vista32 Home Premium cd, but I do have a Vista Home Premium SP1 32-bit that came with my laptop.

Before i do a format on her pc though id like to know if her genuine key would work with my SP1 cd, or if there's a legit way of obtaining another copy an original Vista32 home premium disk without having to buy it all over again. Obviously we still have the key from the original purchase and just need a cd to install it with.

Thanks in advance,

Pierre-Eric

  • 0
Vista and Vista SP1 are completely different, and require different keys.

As others have said, you are 100% wrong. The service pack slipstreamed into the install media has absolutely nothing to do with the key you use.

As for the OEM vs Retail debate, I can only say this; I've not had dealings with Vista OEM yet. However if it is anything like XP, an OEM key will not work on a Retail version of Windows and vice versa.

  • 0

youcould always download one thats already integrated and automatically activated i mean you could put your disc in and enter the product key and see if it passes.. if it does do a custom install and delete the partition make a new one format twice and then install

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • No its not, there are ton of Youtube videos to get you started, what do you think people did before AI existed?
    • Read this in Humor Simpson 's voice, "Out of my way Moe".
    • You still can, its just under the Transform flyout for WordArt now
    • Likely nothing will be done in corporate America, there have been countless Tesla self-driving incidents. Then again, there have also been countless human operated incidents. It's literally daily news here in Canada, to the extent that it's now odd if we get a day where a collision doesn't get announced on the radio throughout the day...
    • SKG Hand Massager with Heat OS500 hands on by Steven Parker I was offered the chance to test out the SKG Hand Massager with Heat OS500, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk, mousing around. Apologies for the knife cut across the top of the box; that was my doing, being a bit too heavy-handed with opening up the outer packaging. First up, what's in the box: SKG Hand Massager with Heat OS500 1x Type-C charging cable User Manual 1-Year Warranty (card) In short, everything you need to get started. According to the official Amazon listing, here are the key features: Full-Hand Air Compression: OS500 wraps your fingers, palm, and wrist with multi-chamber air compression for a complete hand relaxation experience. The extended massage chamber helps cover more of the hand and wrist area than standard palm-only hand massagers Palm Kneading with 6 Modes & 6 Intensities: Built-in palm kneading rollers add a hands-on massage feel, while 6 preset modes and 6 pressure levels let you choose the comfort level that fits your day—from gentle relaxation to a firmer full-hand massage 3 Heat Levels with Cooling Fan: Choose from 104°F, 113°F or 122°F warmth to suit different seasons and comfort preferences. The built-in cooling fan helps reduce stuffiness during heated sessions, keeping your hand feeling fresh and comfortable Easy Visual Display & Smart Timer: The digital image display clearly shows massage area, mode, intensity, heat level, and remaining time at a glance. Select 10, 15, or 20-minute sessions for quick office breaks, evening relaxation, or everyday hand care Rechargeable, Cordless & Comfortable: A 3000mAh battery supports over 90 minutes of full-function use on a full charge, with convenient USB-C charging. The soft inner lining, smooth ABS/PU finish, and premium black-gold design make OS500 ideal for home, office, or gifting With all that out of the way, here are my own findings. I gave it a try on both left and right hands, and as you can maybe see from the above YouTube Short, (sorry for the shaky video), my whole hand fits in, but my wrist barely enters the Hand Massager. I was able to push through a bit more with my fingertips extending out the other end to get a bit of massaging on the start of my wrist. Usage For some reason, there is a strap that is very difficult to fasten to my wrist with one hand. I am not sure what function it has, and it isn't mentioned in the user manual. The only thing I could find was in the product images that claimed "wrist precision". Unlike the Bob and Brad Hand Massager, this device does not massage the wrist anyway, even though a "wrist mode" is mentioned, which must be for smaller hands than I have, as it is mainly intended for the hand and fingers. In addition, for its steeper price, there are no disposable gloves provided in the box, which is a bit of an issue considering the internal cover (which appears to be elasticated nylon) cannot be removed for washing; so you are left with only one choice: always thoroughly wash your hands before using it. I can imagine this thing getting a bit grimy after a period of use, and that is a bit of a shame. With that said, the buttons on the device, from left to right, do the following: Heat button: 3-level heat control at 104°F, 113°F, or 122°F Mode button: Auto mode Circular mode Soothing mode Relax mode Palm and fingers mode Palm and wrist mode Intensity button: from (First-time users) 15Ka, 25Ka, 35Ka, 45Ka, 55Ka, 60Ka (Intensive relief) Knead button: on or off (6 pressure levels) Power button: Long-press to turn on or off Cooling button: turn on or off the cooling fan Also, in the product imagery, it states there are 36 "custom modes," but nowhere is it listed what these modes are. I can only imagine that they mean a combination of all of the above settings in different intensity levels. The device itself seems to rely on a single "kneading" mechanism located at the palm area of the hand, which spins when in use, and the other massage features are mainly utilized through the air sacs, increasing and decreasing at various levels on the hand and fingers. I am not sure it offered too much relief for someone who is typing and operating a mouse for hours at a time; further testing may be required. It does feel nice, though. Finally, you may be wondering how this fits into the scope of a tech website? Well, let me tell you something: sometimes I sit for up to 15 hours working on Neowin, and although I take breaks in between, it takes a toll on my body. I think in the immediate absence of a partner to apply relief, a good massager like this Hand Massager can shed the strains of the day in just a couple of 15-minute bursts. On the official website, this has an MSRP of $99.99, but luckily for our readers, it is selling at $10 off for just $89.99 right now on Amazon. SKG Hand Massager with Heat OS500 for $89.99 (with $10 off coupon), $99.99 MSRP For me, this gets a thumbs hands(?) down. However, it could be improved by making it so that the protective covering could be removed and thrown into the washing machine, or get yourself some disposable gloves to use with it. As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      181
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!