Help with my Nvidia 9600Gt 1 Gb card! (overheat)


Recommended Posts

I got a graphics card - brand new 9600Gt 1 Gb (Gigabyte). Throughout playing call of duty 4 and other games i found out that after some time the game just crashes. Every crash was wierder than the next - they didn't seem to have a defined period of the "bug" happening. So once i was playing cod4 and it crashed. This time, i checked the GPU temp (speedfan). It appeared to be an amazine 95 degrees celsius! Now since the recommended temp is round 60 i was baffled.

My temps look like this:

On startup (directly after startup): 35 degrees

7 mins after startup: 52 degrees

Some time later: 73 degrees (while surfing the net)

After i play a game it goes all th way up to 95!

My comp specs:

Motherboard: Asus P5N-T Deluxe

HDD: Seagate 500Gb, 32 MB

Proccessor: Intel quad core q6600 @2.40 GHz (not overclocked)

Grapgics card: Nvidia 9600 GT 1 Gb (Gigabyte) (not overclocked)

RAM: 2 x 2Gb Kingston

DVD drive: Dunno (doesnt matter anyway i guess)

Now i don't have any ventilators apart from a 120 mm front (prob isnt the problem seeing as i have my comp opened up - one side is opened up). Im thinking of buying a thermaltake chassy (5 x 140 mm ventilators) but i don't want to spend 100 euros on that. My brother has the same card (although bout 14 days older, looks a bit differnet too) and has no problems at all. He too doesnt have a ventilator.

Anyone got an idea what could be wrong?

Pic: http://www.svmlemag.fr/files/gigabyte_9600GT.jpg

Thx in advance,

Lachesis

Edited by Lachesis
Anyone got an idea what could be wrong?

It's overheating most likely due to poor airflow in your case. Without proper airflow passively cooled cards will overheat under a load quicker than you can say "omgwtf my game crashed".

Lachesis, wait to see if the 3rd party fan fixes it. I f not, then post it in here, and we can venture into something else, but right now it all points to the gpu heatsink.

Those Silent Pipe coolers from Gigabyte really recquire a case with good airflow. Wide open sides, or lots of mesh on your side panels break up that air flow design and cause those cards to run hot. i used to have a Silent Pipe II 8600GT in my Linux box and the temps would soar with the side panel off but were quite cool with the panel on and the heat pipe doing it's job. I'd be curious to know what case you have and what your air flow pattern is like. That coolers design really counts on strong front to back air flow with few interuptions.

Ok thx

Mindovermaster im getting this new chasi: ACPlus monolize. Has 2x 25 cm fans at side and im putting in a 120mm at back. Heres a pic: http://www.mlacom.si/largeimage.aspx?docid=40172

Oh and i closed up my comp and the temp fell down for 12 degrees celsius. Ill mount the new chassi asap and post the results. Keep looking ;)

In my opinion get a Arctic Cooling Accelero S1 Rev.2 because I have one and it rocks even with very little airflow. From the picture the fins look very close together which would be it may cool better than a Accelero in a good airflow case but if you are going passive you probably aren't going to have many fans :p

If you know how you may want to also apply your own superior thermal paste such as Arctic Cooling MX-2, but its pretty pricey. I just recently got a new gfx card because my old one died and when I went to put on my Accelero I noticed it only had thermal paste on half of the gpu, now I have no idea how that happened but if only half the gpu is making contact with the heatsink you will overheat for sure.

Hope that helps :)

Well, since you are going to use two passive heated card this case will definitely come to good use.

But, if I were you I'd get a single and much better card for almost the same price as those you are getting.

Secondly, SLI isn't as good as it sounds. In theory you get 100% performance increase. In reality, only a few games can get around 60% (max 80% with driver optimization) out of it. Some older only 10%.

It depends what resolution are you playing at.

Yes i know it isnt 100% more. But seeng as this caed can run games like cod4, the other card will just make them perfect. And yes, if i hadnt goteen 1 of these cards, id rather buy the ati 4870 but seeing as i already have one (and can get another very cheap - 100 euros) ill prob take another card and be done with it. Then after like 3 years ill get a better one ;)

I guess ill stick to the case. Then ill see my new temps (at 1 card - current) Maybe its the cards fault. Although i doubt it.

Si res slovenec?

Slo-Tech, slovenski forum namenjen tovrstnim debatam.

Yes, that case will probably cool it just right. Although some ordinary case with good airflow through it, would do the same job just as good as the one you are mentioning.

I would recommend you Antec P182 EU with some aftermarket fans since those in the case are pretty loud.

But, that's my personal taste. Choose a case that you find appealing.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • draw.io Desktop 30.2.6 by Razvan Serea draw.io desktop is a downloadable security-first diagramming application that runs on Windows, MacOS and Linux. Creating diagrams in the desktop app doesn’t need an internet connection. This is useful when you are disconnected or when you must create diagrams in a highly secure environment, where data protection is of the utmost importance. When you use the draw.io desktop app, your diagrams will be stored on your local device. Because this is a stand-alone application, also designed to run offline, there are no interfaces to cloud storage platforms available. Of course, you can still store your diagrams in folders that are synchronised to your cloud storage if you wish. Easy-to-use diagram editor The draw.io apps work just like the office and drawing tools you are used to using. Drag and drop shapes from the shape libraries and drag to draw connectors between them. Drag connectors to add waypoints and set a precise shape and position, or let them reroute automatically. Double click and start typing to add a label to anything. Create tables and swimlane flows with a familiar tool. Style shapes and connectors with customisable palettes, sketch options, fonts and text formatting tools. Search for shapes, including in open-source icon libraries. Use our vast libraries of shapes and templates, organised into logical categories, to create a range of diagrams and infographics. Generate diagrams from text descriptions using our smart templates. Diagram faster with keyboard shortcuts. draw.io Desktop 30.2.6 changelog: Uses electron 42.5.0 #2452 Updates to draw.io core 30.2.6. Download: draw.io 64-bit | Standalone (Open Source) Download: draw.io 32-bit | ARM64 | ARM64 Standalone Links: draw.io Home Page | Project page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      497
    2. 2
      +Edouard
      207
    3. 3
      PsYcHoKiLLa
      146
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!