Help with my Nvidia 9600Gt 1 Gb card! (overheat)


Recommended Posts

I got a graphics card - brand new 9600Gt 1 Gb (Gigabyte). Throughout playing call of duty 4 and other games i found out that after some time the game just crashes. Every crash was wierder than the next - they didn't seem to have a defined period of the "bug" happening. So once i was playing cod4 and it crashed. This time, i checked the GPU temp (speedfan). It appeared to be an amazine 95 degrees celsius! Now since the recommended temp is round 60 i was baffled.

My temps look like this:

On startup (directly after startup): 35 degrees

7 mins after startup: 52 degrees

Some time later: 73 degrees (while surfing the net)

After i play a game it goes all th way up to 95!

My comp specs:

Motherboard: Asus P5N-T Deluxe

HDD: Seagate 500Gb, 32 MB

Proccessor: Intel quad core q6600 @2.40 GHz (not overclocked)

Grapgics card: Nvidia 9600 GT 1 Gb (Gigabyte) (not overclocked)

RAM: 2 x 2Gb Kingston

DVD drive: Dunno (doesnt matter anyway i guess)

Now i don't have any ventilators apart from a 120 mm front (prob isnt the problem seeing as i have my comp opened up - one side is opened up). Im thinking of buying a thermaltake chassy (5 x 140 mm ventilators) but i don't want to spend 100 euros on that. My brother has the same card (although bout 14 days older, looks a bit differnet too) and has no problems at all. He too doesnt have a ventilator.

Anyone got an idea what could be wrong?

Pic: http://www.svmlemag.fr/files/gigabyte_9600GT.jpg

Thx in advance,

Lachesis

Edited by Lachesis
Anyone got an idea what could be wrong?

It's overheating most likely due to poor airflow in your case. Without proper airflow passively cooled cards will overheat under a load quicker than you can say "omgwtf my game crashed".

Lachesis, wait to see if the 3rd party fan fixes it. I f not, then post it in here, and we can venture into something else, but right now it all points to the gpu heatsink.

Those Silent Pipe coolers from Gigabyte really recquire a case with good airflow. Wide open sides, or lots of mesh on your side panels break up that air flow design and cause those cards to run hot. i used to have a Silent Pipe II 8600GT in my Linux box and the temps would soar with the side panel off but were quite cool with the panel on and the heat pipe doing it's job. I'd be curious to know what case you have and what your air flow pattern is like. That coolers design really counts on strong front to back air flow with few interuptions.

Ok thx

Mindovermaster im getting this new chasi: ACPlus monolize. Has 2x 25 cm fans at side and im putting in a 120mm at back. Heres a pic: http://www.mlacom.si/largeimage.aspx?docid=40172

Oh and i closed up my comp and the temp fell down for 12 degrees celsius. Ill mount the new chassi asap and post the results. Keep looking ;)

In my opinion get a Arctic Cooling Accelero S1 Rev.2 because I have one and it rocks even with very little airflow. From the picture the fins look very close together which would be it may cool better than a Accelero in a good airflow case but if you are going passive you probably aren't going to have many fans :p

If you know how you may want to also apply your own superior thermal paste such as Arctic Cooling MX-2, but its pretty pricey. I just recently got a new gfx card because my old one died and when I went to put on my Accelero I noticed it only had thermal paste on half of the gpu, now I have no idea how that happened but if only half the gpu is making contact with the heatsink you will overheat for sure.

Hope that helps :)

Well, since you are going to use two passive heated card this case will definitely come to good use.

But, if I were you I'd get a single and much better card for almost the same price as those you are getting.

Secondly, SLI isn't as good as it sounds. In theory you get 100% performance increase. In reality, only a few games can get around 60% (max 80% with driver optimization) out of it. Some older only 10%.

It depends what resolution are you playing at.

Yes i know it isnt 100% more. But seeng as this caed can run games like cod4, the other card will just make them perfect. And yes, if i hadnt goteen 1 of these cards, id rather buy the ati 4870 but seeing as i already have one (and can get another very cheap - 100 euros) ill prob take another card and be done with it. Then after like 3 years ill get a better one ;)

I guess ill stick to the case. Then ill see my new temps (at 1 card - current) Maybe its the cards fault. Although i doubt it.

Si res slovenec?

Slo-Tech, slovenski forum namenjen tovrstnim debatam.

Yes, that case will probably cool it just right. Although some ordinary case with good airflow through it, would do the same job just as good as the one you are mentioning.

I would recommend you Antec P182 EU with some aftermarket fans since those in the case are pretty loud.

But, that's my personal taste. Choose a case that you find appealing.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Simple answer is yes, you will still get the Windows updates and as long as browser is up to date, you will be good. Only thing secure boot does is protect you against boot level threats and make it harder to install other OS's. I've been looking into this pretty thoroughly lately myself as wifes computer has secure boot disabled plus my other, older computers that run Linux, don't have secure boot enabled. Have seen all kinds of questions about this on the Linux Mint and MX Linux forums. Just don't suddenly enable secure boot now.
    • How many other companies will follow Ford's lead? Or, have they already gotten lazy and become enslaved to AI--and now can't figure out how to get out of that mess.
    • Why would any self-respecting intelligent person follow any recommendation by Donald's GOP administration? With almost two years of fabrications, deceit, and blatantly illegal behavior, why believe them now? They had best be gone after the November 2026 election, so we'll wait and see.
    • AltSendme 0.4.1 by Razvan Serea AltSendme is a minimal, cross-platform application designed for fast, secure, and private peer-to-peer file transfers. It allows users to send files or entire directories directly between devices without relying on cloud servers, accounts, or any personal information. Everything is encrypted end-to-end using modern protocols like QUIC and TLS 1.3, ensuring both strong security and low-latency performance. Transfers are verified with BLAKE3 for data integrity, and interrupted downloads automatically resume, making the experience reliable even on unstable connections. You can transfer anything—images, videos, documents, and more. Integrity checks are performed on both ends, so your files are automatically verified for correctness during both sending and receiving. AltSendme works seamlessly across local networks or long-distance links, capable of saturating multi-gigabit connections for extremely fast delivery. With built-in NAT traversal and encrypted relay fallback, it connects devices almost anywhere. The app integrates with the Sendme CLI and will soon support mobile and web platforms. Fully free and open-source, AltSendme offers a lightweight, privacy-first alternative to traditional cloud-based services, removing size limits, upload costs, and unnecessary data exposure. AltSendme 0.4.1 changelog: Release Highlights Self-hosted relays: Run your own iroh relay so transfers don't rely on public infrastructure. Includes a full deployment template in deploy/relay/ with Docker Compose for a VPS and configuration examples for production use. Fly.io support: One-click deploy template for Fly.io, including a quick-start config (fly.dev.toml) for testing without a custom domain, plus production setup with Let's Encrypt and your own hostname. Relay settings UI: New Settings → Network panel to choose how AltSendme connects: automatic public relays, custom self-hosted URLs (with optional auth token), or disabled. Test connections, verify latency, and see live relay status in the footer. Disable relays: Turn off relay servers entirely when you only need same-network transfers (e.g. LAN). Direct connections only. No relay hop required when devices can reach each other. Android graduates from beta: Android is now part of the regular release cycle alongside desktop. APKs ship with each version (universal, arm64, and armv7). Other improvements Private relay access control via shared auth token Relay fallback notifications when a custom relay is unreachable Broadcast mode toggle in sharing settings Android release build fixes (split-per-ABI APKs, universal APK preservation) UI polish: mobile safe-area insets, dropzone layout, transfer progress animation Bug fixes for minification-related serialization issues and system tray icon loading What's Changed feat(relay): add relay status functionality and settings UI (a120cdf) feat(relay): implement custom relay server configuration and verification (51276c7) feat(relay): add configuration for private relay access and enhance observability features (48fbabf) feat(relay): enhance relay URL validation, display connection status (d4fffa0) feat(relay): add RelayChangeGuard component and enhance relay-related translations (16ba514) feat(broadcast): add toggle setting for broadcast mode in sharing UI (ca6d977) fix(relay): correct QUIC discovery port, pin image, templatize fly.dev (52a2ba5) fix: More broken serialization due to minification (67491a9) fix(android): preserve true universal APK across per-ABI builds (e9f256f) fix(ui): conditional safe-area insets padding on mobile (1182f0e) refactor(transfer): CircularRing component animation fix (944572b) chore(android): drop x86 and x86_64 release APKs, keep universal+arm64+armv7 (34ada0b) Download: AltSendme 0.4.1 | ARM64 | ~9.0 MB (Open Source) Download: AltSendme for MacOS | Android Links: AltSendme Home Page | GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You are mostly right about the ephemeral nature of it. As I mention in the article, if you dont add a second device or take a backup of your account before uninstalling it, then yes you will lose access to your account. That said, in terms of actual user experience when you sync multiple devices your message history carries across and there's also a Saved Messages chat like there is on Telegram to send messages and attachments between your installs. But yh, what you point out are correct and its not trying to emulate Messenger or Telegram.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      149
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!