• 0

Can not install a program because of the error 1335


Question

I have a computer for one of my client , I tried to install Microsoft office 2003 and it give me error message 1335??..I though problem with my CD, then I used different CD same error message.

  Quote
Error 1335. The cabinet file 'name.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package

After spending hours to solve this issue I could not , I tried many all of them did not help me out.

Then I formatted hard drive and I installed fresh copy of windows XP SP2, every thing going fine.

Now I tried to install office again same problem , then I tried to use adobe Photoshop CD same error message 1335 , then I tried to install SP3 same error message 1335.

Now I have been convinced that the problem with the western digital hard disk ( WD800JB) IDE not SATA, I downloaded utility for WD to test (short and extended) the hard disk the result shows me there is no error.

What could be causing this problem ? Why installation went smoothly while installing programs did not ? if the CD Rom (SATA not IDE) would have causing this problem why not with windows CD ?

Be aware after fresh installation I do not have any firewall or antivirus yet.

5 answers to this question

Recommended Posts

  • 0

Hello,

It might be helpful to know what things you tried to resolve the issue. Since you didn't say what steps you took to troubleshoot the problem or what the results were, it is difficult to know what to recommend.

Without knowing more about the situation, here are a few things you could try:

  • Delete the contents of the %windir%\TEMP\ and %temp% directories and re-run the installs.
  • Download and install the Windows Installer 4.5 Redistributable on the computer.
  • Download and run the Windows Installer Clean-Up Utility on the computer.
  • Cleaning the optical drive in the computer and re-running the install from the installation media.
  • Try copying one of the CDs on a different computer to a USB flash drive, then taking the USB flash drive to this computer, copying the files to its hard disk drive and running the install from there. If there is a problem with the optical drive in the computer, this should let you get around it.

If you already tried these things and they didn't work, then other forum members may have some suggestions that work.

Regards,

Aryeh Goretsky

  • 0

Hello goretsky

  Quote
Delete the contents of the %windir%\TEMP\ and %temp% directories and re-run the installs.

After the fresh installtion nothing is there.

  Quote
Download and install the Windows Installer 4.5 Redistributable on the computer.

Download and run the Windows Installer Clean-Up Utility on the computer.

Were not helpful so solve the problem.

  Quote
Cleaning the optical drive in the computer and re-running the install from the installation media.

I used different CD Rom drive still same problem is going on

With Adobe Acrobat I received this error

  Quote
Error 1335. The cabinet file ?Data1.cab? required required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package

With windows I received this error

Installation Error:File not Found

A required installation file YB561408.CAB could not be found

  Quote
Try copying one of the CDs on a different computer to a USB flash drive, then taking the USB flash drive to this computer, copying the files to its hard disk drive and running the install from there. If there is a problem with the optical drive in the computer, this should let you get around it.

I tried to copy that and still i am experiencing same problem

  • 0

The only other solution to this that I've seen is using the /MAXMEM switch in boot.ini, if you go to http://support.microsoft.com/kb/314810 this has a full explaination of what it means. (Though it says Office XP, 2000, I've seen it mentioned as a solution for all sorts of 1335 errors) Whether it will actually work or not...mileage may vary.

  • 0

Hello,

Reading Donkey88's reply made me think of something. Have you tested the computer for memory errors using a program such as Memtest86+? If so, were any errors found after running the program overnight?

Regards,

Aryeh Goretsky

  • 0
  Quote
Reading Donkey88's reply made me think of something. Have you tested the computer for memory errors using a program such as Memtest86+? If so, were any errors found after running the program overnight?

Yes I did , it passed the test.

But when I replaced the RAM , it worked fine without any problem.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I've written a Substack article where I talk about the expected release date for Debian 13 (August 9th) and cover some of the upcoming changes that will either affect me personally, or that I thought noteworthy.  You can read the whole thing here: https://open.substack.com/pub/gerowen/p/debian-gnulinux-13-trixie-is-just?r=54rcsd&utm_campaign=post&utm_medium=web&showWelcomeOnShare=true It's rather long and has several images that would probably exceed the attachment limit, but I'll copy and paste the first little bit of it here:  
    • Too many middle managers at these big companies are the problem imo. The guys under them do all the work but these VPs or PMs fight with each other in order to move up the ladder which just messes things up.
    • Microsoft lifts another long-standing Windows 11 24H2 block, allowing more people to upgrade by Taras Buria In October 2024, Microsoft released Windows 11 version 24H2 with quite a long list of known bugs and upgrade blocks. Ever since, Microsoft has been slowly patching those bugs and lifting blocks one by one. Now, the company is removing another upgrade block, letting more Windows 10 and Windows 11 users upgrade to the latest version ahead of the upcoming end of Windows 10 support. The block in question affects PCs with Easy Anti-Cheat, an anti-cheat solution embedded in many popular games, such as PUBG or Fortnite. According to the official documentation, the compatibility issue affects systems with Intel's Alder Lake+ processors and the vPro platform with Easy Anti-Cheat drivers released before April 2024. Affected systems crash to the blue screen of death (now black screen of death) with the "MEMORY_MANAGEMENT" error. However, blue screens of death do not occur if games do not use outdated drivers that are present on the device. The upgrade block was placed on September 30, 2024, and now, nearly ten months later, Microsoft has lifted it. As of July 24, 2025, affected systems can finally install Windows 11 version 24H2 via Windows Update. Note that Windows Update might still prompt you to update games that use an incompatible Easy Anti-Cheat version. Compatibility issues with Easy Anti-Cheat are only present in Windows 11 version 24H2, so if you are running older Windows 11 versions or Windows 10, there should not be any crashes, even with outdated drivers. Windows 11 version 25H2 is coming in a couple of months, but its predecessor still has several upgrade blocks in place. There are compatibility issues with Intel Smart Sound Technology drivers, hanging apps that use the camera, audio output losses on PCs with Dirac Audio, and sprotect.sys driver issues.
    • XRECODE3 1.169 by Razvan Serea xrecode3 is a converter and audio-grabber which allows you to convert from mp3, mp2, wma, aiff, amr, ogg, flac, ape, cue, ac3, wv, mpc, mid, cue ,tta, tak, wav, wav(rf64), dts, m4a, m4b, mp4, ra, rm, aac, avi, mpg, vob, mkv, mka, flv, swf, mov, ofr, wmv, divx, m4v, spx, 3gp, 3g2, m2v, m4v, ts, m2ts, adts, shn, tak, xm, mod, s3m, it, mtm, umx, mlp to m4a, alac, ape, flac, mp3, mp4 (using NeroAAC), ogg, raw, wav, wav(rf64), wma, WavPack, mpc, mp2, Speex, ofr, ac3, aiff, tak, snd and Shorten formats. Command Line parameters are supported. XRECODE3 features: Works on XP, Vista, Windows 7, Windows 8, 10 32/64 bit versions and under Wine. Parallel conversion by utilizing power of multi-core CPUs. Support of embedded CUE sheets (for FLAC, WavPack, APE and TAK files). Support of mp4, mka chapters (can split mp4, mka by chapters to any supported format). Built-in Metadata editor with Cover Art support. Has support for LossyWav. Supports portable mode. Merge input files to one large audio file and create CUE sheet. Converting to many formats at once using "Multiple" output mode. Grabbing of multi-channel Audio CDs to the desired format at once. Informative and resizable UI suited even for netbooks. Extracting audio from flv, avi, mov etc. video files (multiple audio streams are supported). Can export/import Metadata to/from external file. Support for 24/32bit audio files. Multilanguage support. Currently program is available in Dutch, English, French, Japanese, Korean, Polish, Russian, Hungarian, Italian, Spanish, Spanish Traditional, Swedish, Brazilian Portuguese, German, Finnish, Bulgarian, Czech, Danish and Chinese (simplified) languages. What's new in XRECODE3: Native 64bit support. Added support for DSD/DST and DFF formats (including handling of SACD ISOs). Added option to extract audio without transcoding. Added option to encode several files to one multi-channel file. Added option to split file into individual track-per-channel for all available output formats. Added option to merge files per folder. Output and Metadata settings are now output format specific. Enhanced Metadata settings. Added support for multiple Cover pictures in Metadata editor. Added 32bit int/float output for formats which support them (e.g. WAV). Added dithering option in Output Settings. Added option to use EBUR128 in Normalize. Added option to Album Mode Normalize. Added option to configure Matrices under Output Settings. Added more output file pattern elements. Tabbed UI. CUE files are now displayed more nicely. Enhanced Shell Extension. XRECODE3 1.169 changelog: FIX: resolved an issue where playlist file names was created with 2 dots before the file extension. FIX: fixed issue with encoding some files to ac3 format. Download: XRECODE3 v1.169 (64-bit) | Portable | ~30.0 MB (Shareware) Download: XRECODE3 v1.169 (32-bit) | Portable Link: XRECODE3 Homepage | XRECODE3 Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • So... Tesla fails, SpaceX fails, not Starlink... I guess karma is a bitch...
  • Recent Achievements

    • Week One Done
      Itbob513626 earned a badge
      Week One Done
    • One Month Later
      Itbob513626 earned a badge
      One Month Later
    • Rookie
      EdwardFranciscoVilla went up a rank
      Rookie
    • Week One Done
      MoJo624 earned a badge
      Week One Done
    • Collaborator
      aeganwn earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      619
    2. 2
      ATLien_0
      242
    3. 3
      Xenon
      160
    4. 4
      Michael Scrip
      123
    5. 5
      +FloatingFatMan
      123
  • Tell a friend

    Love Neowin? Tell a friend!