Recommended Posts

If there are any other IT manager/Directors/Systems Admins out there, I am looking for some advice on how to change the attitude of my employees towards IT.

If there is a computer problem they act like we are causing the problem, instead of being a part of a team and realizing we are here to help.

I work in health care and some of the nurses/physicians/administrative people are just rude. Has anyone else faced this challenge and overcame it? IF so what did you do?

It has gotten so bad that I had my systems administrator recently quit on me, and now I have to replace that person and start training again.

Any help or advice is greatly appreciated.

Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/
Share on other sites

Your IT workers need to be VERY patient and take time to try and explain, in layman's terms, what exactly happened. A lot of users don't understand computers very well and they get frustrated by things not working. If your IT people swoop in, fix it and then leave, the user doesn't understand what went wrong and what they could be doing to cause the issue.

Make sure they don't talk down to the users or use too much tech-speak. That'll confuse them more and they will either feel stupid, belittled, or more frustrated.

Any show some empathy. Try to make them feel that your IT workers truly share in their frustrations.

It will take time to correct the view of IT. Given the right people with the right attitude, IT will change people's opinion by the good job they do.

If all else fails, punch 'em in the face. Right Tom? ;)

Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590215436
Share on other sites

If they are rude, don't help them. Tell them they need to calm down and you will be back in a couple of hours when they settle down. Basically, treat them like children if they are acting like it.

Also, inform upper management that this is causing high turnover, and that attitudes need to change.

If nobody listens, provide a minimum level of service and repeat above as the source of the slow support.

Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590215446
Share on other sites

It's all in the attitude of the person and how well he can deal with rudeness.

Maybe you could give some guidelines on how to act, make him go to some "workshop" about work relations and such matters.

Or at least read this... :)

EDIT:

This site is gold lol...

How to Avoid a Confrontation

1. Determine the cause of the problem. Perhaps you said something inappropriate or offensive. If so, a simple apology might ward off a possible confrontation.

2. Evaluate the situation. If you sense that an apology might not be accepted, take a look at the other person's size, and see how you measure up in case a confrontation might occur.

3. Restrain yourself. Even if you feel confident that you would come out on the winning end of an altercation, there is no reason to get into a fight.

4. Try to assume control. If the other person is intoxicated, attempt to calm him down. Tell him you don't want to fight, and pick up your cell phone as if to show him you will call your local emergency number. (See Tip below.)

5. Protect yourself. If all else fails, just get away from there as soon possible. Run until you are in a well-populated area and then call your local emergency number.

Edited by Lechio
Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590215466
Share on other sites

I need a job :whistle:

I was waiting for that. lol Sorry I am in the States.

I appreciate all the advice, but I really dont think it is coming from our IT people, they do try to explain things to them in laymens terms.

An example: A nurse called me and said "I am trying to type my username in and I am getting numbers instead of letters, I have 3 patients waiting and a busy day and I don't have time for this. I told her to hold down the num Fn key on her laptop and hit num lock. She does and says, that fixed it. 15 minutes later my boss calls and said she called him complaining about computer problems."

Thats just one example. We try to help and we get blamed for the problem. This is what I want to put a stop to. We are here to help.

Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590215560
Share on other sites

If they are rude, don't help them. Tell them they need to calm down and you will be back in a couple of hours when they settle down. Basically, treat them like children if they are acting like it.

Also, inform upper management that this is causing high turnover, and that attitudes need to change.

If nobody listens, provide a minimum level of service and repeat above as the source of the slow support.

this is probably not a good approach, it's akin to just slamming the door as a child and sulking...

you need to do a few things (in no particular order)

1. Perhaps most importantly do not belittle your users, no matter dumn as **** they are. You need them and they need you.

2. If there is an issue, missing data, system down etc call the user that logged the issue (don't email) tell them you are on it, follow up with the email.. this is far more personal and you will build relationships with some who will spread good word for you

3. Try not to break anything when it can be avoided. Need to patch something? come in a bit late and go home an hour late... do it in THEIR downtime, not just when it's convenient for you and tell them far in advance. This used to cause me no end of issues when i was inexperienced, "oh ill just restart the webserver real quick". No. Don't. Ever. :)

4. Try to be proactive, go around perhaps once a week and ask if things are wrong.. the number of people that don't log bugs is insane!!!! just go and ask, you will become mr popular

5. Don't employ douche bags. I'm not saying your sys admin was, but if the IT staff cannot converse correctly with the users, diffuse issues, and understand the business they support there is absolutely no hope in hell they will be able to adequately interact with the users to support them well

Hope that helps.... :D

Edited by BGM
Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590215564
Share on other sites

The thing with working in IT is you're always working with people whenever they have problems, so, by the job's nature, you're almost always dealing with people when they're at their worst; it's kind of like working in retail, but always with angry customers. I think it's something you have to deal with as part of the job, as you might expect retail employees to have to deal with irate customers. It's not really a pleasant job.

Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590215600
Share on other sites

this is probably not a good approach, it's akin to just slamming the door as a child and sulking...

...

While the idea's you present may be good in theory, you will find that if you follow them, people will become even more abusive towards you. This is because they now know that they can treat you any way they want without consequences. I see you are in the UK, so things differ significantly in terms of culture here and abroad.

You need to establish your power bases over the people you support (basic OB 101)

You basically have information power over them, and they are trying to get coercive power over you. If you let them, they will erode your power base, making them have control over you. However, if you do ignore the ********, they will have to come back to you anyways (they depend on your knowledge). For the people acting nice towards your employee, you provide them with reward power (being nice to them and fixing their problems first).

When they call your boss, they are trying to gain legitimate power indirectly. So your boss will needs to tell them to not phone him/her unless there is a major issue...

So you basically need to establish your dominance in the field of office politics.

Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590215684
Share on other sites

put them in their place by showing them that it's probably their fault. most of my coworkers come to me w/ computer problems and it turns out that they just dont know what theyre doing or THINK they do, but really dont. when it breaks, it's my fault. i casually walk over, fix it and explain to them what they did wrong.

Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590215736
Share on other sites

While the idea's you present may be good in theory, you will find that if you follow them, people will become even more abusive towards you. This is because they now know that they can treat you any way they want without consequences. I see you are in the UK, so things differ significantly in terms of culture here and abroad.

You need to establish your power bases over the people you support (basic OB 101)

You basically have information power over them, and they are trying to get coercive power over you. If you let them, they will erode your power base, making them have control over you. However, if you do ignore the ********, they will have to come back to you anyways (they depend on your knowledge). For the people acting nice towards your employee, you provide them with reward power (being nice to them and fixing their problems first).

When they call your boss, they are trying to gain legitimate power indirectly. So your boss will needs to tell them to not phone him/her unless there is a major issue...

So you basically need to establish your dominance in the field of office politics.

you scare me, i hope to never work somewhere where a dept 'dominates' another dept because they have power of information, what kind of bull**** is that!

work together to achieve a common goal.. cultural difference does not even come into it, i guess the only fundamental difference with the way i work and what is being described here is that I am a consultant and it is my job to interact with people and empathise with them to provide solutions to what they are having issues with.

The impression I get from you is that, you are one of these tech workers that users actaully don't want to go to for help.. this seems to me to only lead one way, downward in a spiral.

Don't go out of your way to be all nicey nicey, but just stop, explain whats going on.. how this affects them why such a such has to be done this way etc etc. Above all, stand up for yourself... just because your show empathy does not mean you get walked over

with regards to the power of information over you.. surely the ultimate goal of any IT dept is to provide people with means to gain their own information and support those systems, whether this be in the form of accessing/creating their own reports or looking up some sort of dashboard of scheduled downtime etc..

whether this goal can ever be truly met is a completely different story...

Edited by BGM
Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590215756
Share on other sites

put them in their place by showing them that it's probably their fault. most of my coworkers come to me w/ computer problems and it turns out that they just dont know what theyre doing or THINK they do, but really dont. when it breaks, it's my fault. i casually walk over, fix it and explain to them what they did wrong.

im starting to see a trend... "put them in their place" .... im going to hope you just worded that poorly..

don't belittle your users

Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590215792
Share on other sites

Wow.. some of these posts. *facepalm*

Thats a great idea... lets **** them off even more by cutting their support/ignoring them. Then management is going to ask why they are getting ****ed... and tell them... oh well they are mean... i don't want to help them... probably wouldn't cut it.

Perhaps have a metting or send a global e-mail stating attitude needs to improve and explain to them that you are there to help... not cause the problem.

Get HR/Upper Management involved.

Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590215818
Share on other sites

you scare me, i hope to never work somewhere where a dept 'dominates' another dept because they have power of information, what kind of bull**** is that!

work together to achieve a common goal.. cultural difference does not even come into it, i guess the only fundamental difference with the way i work and what is being described here is that I am a consultant and it is my job to interact with people and empathise with them to provide solutions to what they are having issues with.

The impression I get from you is that, you are one of these tech workers that users actaully don't want to go to for help.. this seems to me to only lead one way, downward in a spiral.

Umm, welcome to real life? It's called Organizational Behaviour...and it's basic training if you ever want to become a manager. I suggest reading up on it.

There is nothing wrong with the ######-for-tat approach, as it actually works. You will find that people who were acting like idiots towards you will act nice and be nice once they see they have a dependancy towards you (just like you do for other people in your department, boss, etc).

According to you, you should just accept their behaviour and pretend like nothing happened? I guess if you don't mind having a mental breakdown in a couple of years, then you could do that.

Power is a huge issue in the corporate world, and if you don't play the game correctly, you will be out of there in a flash.

Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590215834
Share on other sites

I think people are rude because a) they are rude or b) they don't understand what's going on, they don't like being forced to use something they don't understand and you are responsible for that thing they don't like and don't understand. Think about it, a lot of these people did not sign up to a job to use computers. A lot of them have been forced to use computers with little to no training. They are resentful toward IT and the people behind it (you).

I think as an IT professional you have a duty to slowly but surely keep plugging away at trying to teach people about things, in ways they can understand. The problem with far too many IT people is the kind of childish arrogance displayed in this thread. No wonder you get treated badly if you patronise people. You wouldn't like it if your doctor was on some "information power trip" over you.

When your boss comes to you with complaints, tell him to get his staff trained.

No one would expect someone to drive or operate some huge machine without training, and yet we expect people to be able to use computers without it.

Obviously if someone is really, badly rude, then they shouldn't be allowed to get away with it. Make complaints about that. If someone is just frustrated, try to understand why and don't take it personally.

Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590215876
Share on other sites

@Persephone: I'm glad im not the only one thinking zivan56's approach is wrong... thought I was going mad for a bit there :)

According to you, you should just accept their behaviour and pretend like nothing happened? I guess if you don't mind having a mental breakdown in a couple of years, then you could do that.

Power is a huge issue in the corporate world, and if you don't play the game correctly, you will be out of there in a flash.

Well, this is getting a bit personal now. But in my current position, I have all the power I need, I would quite happily tell my boss to go **** himself if I thought he was taking the **** and he knows that, so we have a mutual respect.

As for users, ok so you can't tell them to **** off... but a few stern words to tell them to calm down aren't going to go amiss. I would NEVER just accept the poor/rude/abusive behaviour of someone in any scenario.. it's easy. Calm.Explain.Plan.Do. and keep them informed along the way... if a fix is going to take a week, tell them and explain why in simple terms. They will understand, and thank you for keeping them informed!

Power is not a concern, I have been promoted through hard work, keeping clients happy and securing new projects.. not through ######-for-tat powerplay, and I can say one thing for certain if you worked for me and you displayed that attitude you would see your ass fired very very quickly.

Edited by BGM
Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590215926
Share on other sites

Plenty different here in the states. Ignoring people because they are being rude will easily get you fired in most companies that I know of.

Even if people are rude, it's your job to take notes and examples of what was taking place, not to ignore them. Ignoring them simply isn't the answer.

Yeah, try to get upper management involved and see where it leads you. A nurse can still go over your head to another boss and get you canned. 15 minutes later they forget about it anyways. They just want to sit down and have things work. Try to find a way that you can convey that message to them.

I know people in the HC industry (and I used to be) working in IT and yeah, they deal with people that are not too bright (with computers) and are quick to get angry or frustrated. They (IT) make sure everything is documented completely because it holds up much better than someone who is simply venting, while you took the notes to illustrate how things really went down.

The management teams have to get together to see how to best deliver the message of making sure people can get help without getting as frustrated.

Being calm on the phone and reassuring is actually what works best for me. Knowing they can talk with someone who can assist them quickly and who values their time is what they are sometimes looking for. If there's still a complaint, have a manager follow-up with them on a particular incident. Sometimes they just need a little face time with someone who can act as a buffer and realize their frustration matters to the people who have to support the technology. Who knows - maybe they'll have something to offer so that next time they aren't so upset when they call you. With the right plan in place, they might actually enjoy calling you, knowing you're improving your practices to ease their ignorance with technology.

I've met, worked with and witnessed the individuals who think they are so great that they can act or say whatever they want to. I've also seen them get escorted to the doors and throw out on their asses. I have yet to meet the person who can't be replaced - and most times, they're replaced by someone willing to do a better job for less money with less ignorance.

Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590216036
Share on other sites

Well, this is getting a bit personal now. But in my current position, I have all the power I need, I would quite happily tell my boss to go **** himself if I thought he was taking the **** and he knows that, so we have a mutual respect.

As for users, ok so you can't tell them to **** off... but a few stern words to tell them to calm down aren't going to go amiss. I would NEVER just accept the poor/rude/abusive behaviour of someone in any scenario.. it's easy. Calm.Explain.Plan.Do. and keep them informed along the way... if a fix is going to take a week, tell them and explain why in simple terms. They will understand, and thank you for keeping them informed!

Where did I say to go tell people to f-off? I am not saying do these things openly, just make a mental note of it. Obviously telling someone such things as "shut up it's your fault! I'm not helping you anymore!" is going to get you fired. That's why one needs to say things like "I see you are a bit agitated right now, perhaps I better come back at a more convenient time." If they persist, you need to correct their behaviour using the methods I stated above (and not in an explicit, belligerent manner).

If they are acting normally towards you, on the other hand, you reward them with being nice and giving them priority when possible.

Power is not a concern, I have been promoted through hard work, keeping clients happy and securing new projects.. not through ######-for-tat powerplay, and I can say one thing for certain if you worked for me and you displayed that attitude you would see your ass fired very very quickly.

Where did I say it doesn't involve hard work and keeping people happy? I guess you aren't in management, so you don't see the big picture: keeping your employees happy is your main priority. I don't know where you work, but making your employees suffer as a result of personal goals (i.e. promotions, your personal image in the eyes of other departments) is going to get you an astronomical turnover rate and a nice pink slip on payday (and your own personal security escort out of the building).

Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590216066
Share on other sites

Where did I say to go tell people to f-off? I am not saying do these things openly, just make a mental note of it. Obviously telling someone such things as "shut up it's your fault! I'm not helping you anymore!" is going to get you fired. That's why one needs to say things like "I see you are a bit agitated right now, perhaps I better come back at a more convenient time." If they persist, you need to correct their behaviour using the methods I stated above (and not in an explicit, belligerent manner).

If they are acting normally towards you, on the other hand, you reward them with being nice and giving them priority when possible.

Where did I say it doesn't involve hard work and keeping people happy? I guess you aren't in management, so you don't see the big picture: keeping your employees happy is your main priority. I don't know where you work, but making your employees suffer as a result of personal goals (i.e. promotions, your personal image in the eyes of other departments) is going to get you an astronomical turnover rate and a nice pink slip on payday (and your own personal security escort out of the building).

One word. Exactly.

I think there was some major misunderstanding there, and no I didn't see you type anywhere that you told people to f-off, you assumed that. As it was not in quotations, it quite simply was not a quote.

Seriously though, I think we are both on the same page here, sort of. You're right, actively slating people will get you the sack. But in my book, so will a ######-for-tat attitude with regards to inter departmental relations.

I don't quite understand the last portion of your post... could you perhaps rephrase it and I'll respond accordingly? I'll have a stab anyway, taking the "ignore" approach will not keep people happy... so perhaps you should take some of your own advise mr. i guess your not in management and make your users happy by explaining to them why things arent working/calming them down etc...

starting to sound like a bit of a broken record here...

With regards to where I work. I do not work in IT support (here's a surprise), I am a Business Intelligence consultant / contractor and my entire job revolves around giving the client solutions for the lack of information they generally have to their job. To put it bluntly if i took your approach to dealing with clients, I wouldn't have any clients left.

Edited by BGM
Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590216104
Share on other sites

Well, I really do not know what to say. I am a nurse also (for the last 15 years now) and I am very tech savvy. I guess it probably is a personal issue, personality, or frustration and not something based on the profession of the person involved?

Link to comment
https://www.neowin.net/forum/topic/705320-rude-employees/#findComment-590216126
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Flameshot 14.0 Final by Razvan Serea Flameshot is a free and open-source, cross-platform tool to take screenshots with many built-in features to save you time. Using Flameshot is as simple as launching, dragging the selection box to cover the area you want to capture, making annotations as needed in on-screen and saving the shot to your computer, all with a very simple and straightforward interface. Flameshot allows users to simply upload their screenshots directly to the cloud in order to easily share it with others. You can upload your image directly to Imgur with a single click and share the URL with others. In-app screenshot editing - You can choose to add an arrow mark, highlight text, blur a section (blur or pixelate an area), add a text, draw something, add a rectangular/circular shaped border, add an incrementing counter number, and add a solid color box with Flameshot's built-in editing tools. Command-line interface (CLI) - Flameshot has several commands you can use in the terminal without launching the GUI via a command line interface. The command line interface lets you script Flameshot and use it as the subject of key binds. Flameshot 14.0 release notes: This release brings major improvements to multi-monitor support, fractional scaling support, new capture workflows, and a long list of bug fixes across all platforms. Changelog: New Multi-Monitor Capture Workflow New monitor selection screen before capture for better multi-monitor and mixed-scaling support. Option to auto-capture the monitor under the cursor (X11 & Windows). Tray menu can directly select a monitor. Linux Improvements XDG Desktop Portal is now the primary screenshot method. Added legacy X11 fallback option for minimal window managers. New D-Bus capture API for scripting and automation. Windows Enhancements Global screenshot hotkeys now supported (not limited to Print Screen). New portable mode stores settings next to the executable. Clipboard now always uses PNG format for better compatibility. CLI & Platform Updates Redesigned flameshot screen command with per-monitor capture support. Added native Nix Flake support. More compact launcher UI and improved update notifications. Major Fixes Multiple Wayland stability fixes, including KDE Plasma crash fixes. Clipboard compatibility improvements for GNOME, Wayland, X11, Windows, and macOS. Fixed D-Bus hangs, capture crashes, and HiDPI region issues. Other Changes Dropped Ubuntu 20.04 (Focal) support. Updated translations and build infrastructure. Intel macOS builds are no longer provided. [full release notes] Download: Flameshot 14.0 | 18.1 MB (Open Source) Download: Flameshot Portable | 53.0 MB Links: Flameshot Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Helium Browser 0.13.4.1 by Razvan Serea Helium is a private, fast, and honest Chromium-based web browser — built for people, with love. It offers the best privacy by default, unbiased ad-blocking, and a clean experience free from bloat and noise. Proudly based on Ungoogled-Chromium, Helium removes Google’s clutter while keeping a fast, efficient development pipeline. With thoughtful touches like native !bangs and split view, Helium is a people-first, fully open-source browser that puts control back in your hands. Privacy, security, and control come first. Ads, trackers, and third-party cookies are blocked automatically, HTTPS is enforced everywhere, and all Chromium extensions work seamlessly — while Google can’t track your activity. Helium’s 13,000+ offline-ready !bangs let you jump straight to sites or AI tools like ChatGPT instantly. Open-source, people-first, and unbiased, Helium delivers a browsing experience that’s fast, secure, and free from noise, ads, and compromises. Helium Browser key features: Performance Fast, efficient, and lightweight — built on Chromium’s optimized engine. Energy-saving and consistent — stays fast over time without slowing down. No bloat — stripped of unnecessary components for maximum speed. Minimalist interface — compact, clean, and distraction-free. Customizable toolbar — hide elements you don’t need. Smooth and stable — no flicker, lag, or animation glitches. Comfort-focused experience — intuitive and unobtrusive. Privacy & Security Best privacy by default — blocks ads, trackers, phishing, and third-party cookies. Unbiased ad-blocking — powered by community filters and uBlock Origin. No telemetry or analytics — zero background web requests on first launch. Strict HTTPS enforcement — warns for insecure sites. Passkeys supported — modern authentication made simple. No built-in password manager or cloud sync — your data stays yours. Extension Compatibility Full Chromium extension support — including MV2 extensions. Anonymized Chrome Web Store requests — Google can’t track extension installs. Extended MV2 support — maintained for as long as possible. Smart Features Native !bangs — browse faster using 13,000+ offline-ready shortcuts. AI integration — use !chatgpt and others directly from the address bar. Offline functionality — bangs work without an Internet connection. Philosophy People-first design — open source, transparent, and community-driven. No ads, no noise, no bias — privacy and honesty over profit. Helium Browser 0.13.4.1 changelog: 0a4f1149 revision: bump to 4 (#1969) 4848de1f helium/core: enable the chromium screenshot feature (#1968) e0dec3f5 onboarding: integrate strings to i18n system (#1948) 417fa5bc i18n: fix newline parsing for onboarding 7a339b39 i18n: add foraged translations for onboarding 4f090cff i18n/generate: add handling for onboarding strings bfe48d58 i18n_apply: manually override parent grd logic for onboarding strings ab214e3c onboarding: bump in deps, wire up grdp afa6a059 helium/core: disable pdf infobar feature (#1965) eba585e7 helium/ui/vertical: fix new tab button alignment and icon size (#1964) 6ecfc9e0 helium/ui/tabs: fix horizontal tab hover background color (#1963) 3db87dc0 helium/ui/tabs: fix new tab button hover/press colors (#1962) 6bbdcc3e helium/ui: improve tab group UI in all layouts (#1961) 53deb314 helium/ui/tabs: enable tab group hover cards e93aece7 helium/ui/vertical: fix tab group appearance, prevent line overlap 629f5495 helium/ui/tabs: restore solid group header colors, enable new colors 961c962e helium/ui/tabs: move horiz tab group underline to bottom, make it thick c96deab6 merge: update to chromium 149.0.7827.155 (#1959) 36db56b4 i18n: update source.gen.json 5ce006ae patches: refresh for chromium 149.0.7827.155 b4c1ea62 merge: update ungoogled-chromium to 149.0.7827.155 4e5e8671 Update to Chromium 149.0.7827.155 08a3e7da helium/ui/layout: disable mute on collapsed vertical tabs (#1778) a0a5bbaf helium/core: simplify context menu and prevent huge widths (#1951) c4732aac devutils/i18n: add forage command (#1944) 11d16986 devutils/i18n: add an option to translate using local CLI tools (#1942) d820c3a2 i18n/prompt: tighten translation rules to prevent common errors (#1940) cf827007 Update to Chromium 149.0.7827.114 6e3d5164 Update to Chromium 149.0.7827.102 Download: Helium 64-bit | Portable 64-bit |~100.0 MB (Open Source) Download: Helium ARM64 | Portable ARM64 Links: Helium Home Page | macOS | Linux | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Glow 26.10 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.10 changelog: New Features The bootstrapping algorithm has been completely redesigned. The software can now launch directly without requiring TS Preloader. As part of this change, the startup splash screen displayed during initialization has been removed. In addition, spikes in CPU usage have been eliminated, resulting in a more stable architecture with significantly lower memory consumption. The Microsoft Office detection infrastructure within the Operating System section has been enhanced. Additional detection support has been added for Office C2R (Click-to-Run) installations. Furthermore, the license status evaluation system has been improved, and the priority order has been revised as follows: Licensed > Grace Period > Other (NOTIFICATIONS, EVALUATION, etc.). Glow now includes preliminary support for Wi-Fi 8 technology, allowing more detailed information to be displayed for Wi-Fi 8-compatible network adapters. Glow now provides full support for Bluetooth 6.2. Adapters supporting Bluetooth 6.2 can be analyzed in greater detail and with improved accuracy. The disk distribution view in the Disk section has been modernized, replacing the traditional table layout with a new 2×2 card-based design. The TS Custom Controls module has been updated to v26.7. Thanks to the new custom controls, all Türkaysoft applications now offer a more modern and consistent user interface aligned with Windows 11 design standards. Bug Fixes Potential line-ending handling issues in the Office detection code within the Operating System section have been resolved. Additionally, the output format has been standardized to UTF-8 to prevent character encoding issues and ensure consistent data processing. Several stability and file management issues within the Debugging infrastructure have been addressed. Problems that prevented new log files from being created after Debugging was disabled, as well as issues causing debug records to be lost, have been fixed. File deletion and reaccess issues that occurred after file locks were released have also been resolved. In addition, a bug that caused newly recreated log files to remain locked after deletion has been eliminated. Unnecessary blank lines within debug logs and the extra empty line that could appear at the end of log files have also been corrected. A shortcut key conflict caused by assigning identical hotkeys to both the DNS Test Tool and the Donation page has been fixed. The DNS Test Tool can now be accessed using CTRL + Shift + D, while the Donation page is available via CTRL + Alt + D. Changes The service responsible for providing the Public IP Address and Internet Service Provider information in the Network section has been updated to use the ipinfo.io infrastructure. This change improves the accuracy and consistency of the displayed data. (No external requests are made while Hiding Mode is enabled.) Some terms in the Dutch and Korean language files have been updated to make them clearer and more user-friendly. [TS Updater] Before the update process begins, users are now prompted to choose whether they would like to view the release notes. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.10 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      581
    2. 2
      +Edouard
      183
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      73
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!