Recommended Posts

Im sorry but from the start I already knew the solution:

Format and reinstall Windows.

The problem lies in malware on your PC which is slowing down your connection. Its plain and simple.

I know that will fix it, but at this point in time, it's difficult for me to reformat.

I'm an RA at my dormitory, and we've got the Novell client on our computers in order to access the internet there. I've already had to have the poor computer workers set up Novell and some other stuff 3 times this year because of reformatting, Lol. They probably won't install it again for me.

I guess I'll load up on malware scanners and see what I can come up with...

I know that will fix it, but at this point in time, it's difficult for me to reformat.

I'm an RA at my dormitory, and we've got the Novell client on our computers in order to access the internet there. I've already had to have the poor computer workers set up Novell and some other stuff 3 times this year because of reformatting, Lol. They probably won't install it again for me.

I guess I'll load up on malware scanners and see what I can come up with...

Well, you should install Windows,Novell and make a image that way when this happens you just restore the image and in 20 minutes life goes on. Is there anyway to backup Novell client and its configs and just reformat? What i don't understand is you said you used a linux livecd how did you get the internet w/o Novell Client?

Well, you should install Windows,Novell and make a image that way when this happens you just restore the image and in 20 minutes life goes on. Is there anyway to backup Novell client and its configs and just reformat? What i don't understand is you said you used a linux livecd how did you get the internet w/o Novell Client?

As far as I know, I can't back up my settings. Perhaps there's a way... I'll check into it.

I'm at home on Christmas break, that's why I was able to get online with Linux.

Comcast has confirmed they're not capping my speed. They've also replaced my modem and gave me a new one...

Im sorry but from the start I already knew the solution:

Format and reinstall Windows.

The problem lies in malware on your PC which is slowing down your connection. Its plain and simple.

of course, firefox could never have issues

ALL HAIL THE MIGHT FIREFOX

*bows*

Download a network monitoring tool and watch your outgoing traffic for a little while. If you have any torrent software, malware or anything that's continuously sending data that can definitely bog down your connection.

I'd start with the monitoring tool though.

tried a new profile yet?

also: the speed differences could also have something to do with their few seconds speed boost "feature"

Agreed. Backup your current Firefox profile somewhere and then delete it. Open firefox to auto create a fresh profile. See if there is a difference.

As for the network monitoring tool, I recommend Bitmeter 2.

Try setting your Network Card speed to Auto or Full Auto in device manager. When i'm connected directly to my modem, setting the speed to 100mbps full duplex kills my download speed, it's done this for almost ten years, with diffrent computers, it's a problem with motorola surfboard modems, i don't know if comcast supply those.

EDIT: Why not have a look at the networking tab in task manager, just to see what your connected at and what percent is being used.

Gee your computer won't boot into safe mode but you have trouble believe that there is something wrong with it? Reformat and stay away from the Warez and porn. problem solved.

I couldn't even go into safe mode as soon as I reformatted. My computer is...not good. It's an old Compaq SR1012NX....

I uninstalled firefox, reinstalled, etc. Same thing.

Although before I went to bed, I loaded up all of my scanners and did a deep scan throughout the night.

Most found nothing, but for some reason, asquared decides to detect files that have been on my computer for ages and say that they're trojans. Even though I doubted the results, I quarantined them anyway. Must have worked, 'cause I have about 30mb more ram free than usual. :huh:

But... Same speeds. Hahaha.

I think Comcast is still coming today to check things out, so we'll see what happens...

Well, I've determined that it has to be something wrong with windows. I just ran Ubuntu and got 22mbps down. :blink:

Speeds were amazingly fast. Back to windows now, and it's down to 2mb again.

What's wrong here?

Should I screen shot my processes?

Format your HD and reinstall Windows!

Uninstalling FF does not remove the profiles. Didn't see what version of Windows you were running put the profiles are usually in "C:\Documents and Settings\<USERNAME>\Application Data\Mozilla\Firefox\Profiles". Go there and delete the folders in there and try again. The fact you were getting 22Mbps in Linux is weird but I am guessing a coding error or something. You could also try creating a new account, that way all the files associated with the profile are fresh.

Uninstalling FF does not remove the profiles. Didn't see what version of Windows you were running put the profiles are usually in "C:\Documents and Settings\<USERNAME>\Application Data\Mozilla\Firefox\Profiles". Go there and delete the folders in there and try again. The fact you were getting 22Mbps in Linux is weird but I am guessing a coding error or something. You could also try creating a new account, that way all the files associated with the profile are fresh.

It will not remove the settings unless you explicitly click on the box during the uninstall to "Remove personal data". But, the method you mentioned above is the easier way to delete profiles without having to reinstall Firefox.

Why do a clean install? From everything he has told us, its only not working properly with Firefox. His first post says he is paying for a 6Mbps connection, his speeds in IE and Chrome are correct. Firefox is the only one that doesn't seem to be working correctly.

@ Loveheart

You see, there are Megabytes, and there are megabits, there are 8 bits in a byte, internet service providers tell their speed in megabits because it makes it sound more than they give, but the download speed you get is 124 kiloBytes per second. If you multiply that by 8, to convert i t into bits, that will give you 992 kilobits, so that's just about the right speed you should be getting, because there are 1000kilobits in a megabit.

Hope that helps you understand.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Would you please fix your graphics. They are outdated and don't fit the article.
    • The Light of Life? We actually do glow till our Death, study finds by Sayan Sen Image by Rafael Rendon via Pexels A study by researchers at the University of Calgary has found that living organisms produce an extremely faint light known as ultraweak photon emission, and that this glow appears to drop significantly after death. The research was published in the Journal of Physical Chemistry in April 2025 and quickly drew widespread attention, leading to more than 200 news stories about the findings. Ultraweak photon emission (or UPE), sometimes called biophoton emission, refers to tiny amounts of light released by living cells as a result of normal biological activity. A photon is the basic particle of light, and researchers say every living system examined so far, including plants and animals, has been found to emit these photons. The glow is far too faint to be seen by the human eye. “I suppose it has a little to do with people being reminded of auras,” says Dr. Christoph Simon, PhD, one of the authors of the study and a professor in the Department of Physics and Astronomy in the Faculty of Science. “It is a fact that living beings glow. It’s a very weak glow, but it’s there and visible with very sensitive cameras.” According to the study, the light involved is extremely weak, ranging from 10 to 1,000 photons per square centimetre per second across a spectral range of 200 to 1,000 nanometres. For comparison, a nanometre is one-billionth of a metre and is commonly used to measure wavelengths of light. Detecting emissions at such low levels requires highly specialized equipment. To study the phenomenon, researchers used electron-multiplying charge-coupled device (EMCCD) and charge-coupled device (CCD) cameras. These imaging systems are designed to detect extremely small amounts of light, including individual photons, while minimizing background noise. The technology allowed researchers to capture signals that would otherwise be impossible to observe. The team worked with the Human Health Therapeutics Research Centre at the National Research Council of Canada (NRC) in Ottawa to examine photon emissions in mice. Researchers took two-hour exposure images of the animals before and after death and compared the results. “We saw that the level of light that they emit – this biophoton glow – is distinctly different between living and dead animals,” says Dr. Daniel Oblak, PhD, an associate professor in Physics and Astronomy and the corresponding author of the study. The images showed a clear decrease in photon emissions after death across the entire body of each mouse. According to the researchers, this provided direct evidence that living and dead tissue produce different levels of ultraweak photon emission. “It’s a very small amount and it’s, of course, very tricky to detect,” Oblak says. The study grew out of discussions between Simon, whose research interests include quantum biology, and Oblak, whose work focuses on detecting light for quantum communication experiments. Quantum biology is a field that explores whether processes described by quantum physics, which studies matter and energy at very small scales, may also play a role in living systems. “Since I work as a quantum physicist on light detection for quantum communication, I thought that experimentally we have a lot of the tools to be able to detect the light,” Oblak explains. The researchers also investigated UPE in plants and found that the light changed in response to stress. When plants were exposed to higher temperatures or physically injured, their photon emissions increased. Chemical treatments also affected the glow. Among the substances tested, the local anesthetic benzocaine produced the strongest emission response when applied to injured plant tissue. These findings suggest that ultraweak photon emission is closely linked to biochemical and metabolic activity inside living organisms. Metabolism refers to the chemical reactions that allow cells and organisms to stay alive and function. Because these reactions change when an organism experiences stress, injury or disease, researchers believe UPE may provide a way to monitor those changes. The researchers stress that the glow is a physical and biological phenomenon, not a metaphysical one. Oblak says more research is needed to understand exactly how the light is produced and what information it may reveal about the condition of living tissue. “We must understand what that is to figure out what’s happening,” he says. “If we can understand how that relates to certain influences on the body – stress, diseases – then that could be used as a diagnostic tool.” The researchers believe the technique could eventually help scientists study health and disease without invasive procedures. Because UPE can be measured without adding dyes, markers or labels, it may offer a way to monitor whether tissue is healthy, damaged or alive. In plants, it could help researchers better understand how organisms respond to injury, heat and other forms of stress. While the work is still in its early stages, the study demonstrates that ultraweak photon emission imaging can provide a non-invasive and label-free way to observe biological activity. Researchers say the approach could become a useful tool for studying vitality, stress responses and other important processes in both animals and plants. Source: University of Calgary, ACS publication This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • Damn, I loved this show back in the day.  
    • Rufus 4.15.2393 Beta 2 by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2393 Beta 2 changelog: Add RISC-V 64 support to UEFI:NTFS Improve the guards for using the "silent" option Improve the ability to cancel during write retries Improve progress reporting for compressed image extraction Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta 2 | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      hhgygy earned a badge
      One Year In
    • One Month Later
      AMV earned a badge
      One Month Later
    • Week One Done
      AMV earned a badge
      Week One Done
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      515
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      83
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      72
  • Tell a friend

    Love Neowin? Tell a friend!