aniv's i7 build + Second i7 Build :D


Recommended Posts

To people on neowin.net this system is probably something that's only dreamed of, but this system is actually very slow, and below average on today's standards considering what you likely paid for it. You seriously need a faster CPU and faster Graphics processing.

Firstly, are you serious? :blink: I am sure you are just filled with envy and only wish you had a system like this....this system is capable of being the benchmark king in the right hands, and its already proven, as this exact setup (Core i7 + Quad GTX295's) holds the 3DMark Vantage record of P40k....and to say he seriously needs faster CPU & Graphics Processing is undoubtedly a retarded statement.

because EVERYBODY has this system now, and its boringly standard now.

Let's see those pictures of your Core i7 Extreme, with Quad SLI'd GTX295s or Tri-SLI'd 285s. Because it is so boringly standard now, right?..... :rofl:

Here's something for you to chew on for a while. Let this be encouraging because you can do this with an I7 920 with the EVGA X58 classified board ( not to be mistaken with your board). It's 5.4 GHz running at 1.68v and 7-8-7-19-T1 timings at 2:12 Memory. Dram frequency is 1120Mhz, so your computer is lacking in performance of what you can do

It's actually running at basically 1.7v (effectively 1.693v). That thing will be fried within a few months, if not weeks if he really runs it 1.7vcore for 24/7 use. I am assuming that is just a benchmark session run and he was probably using either DICE, LN2, or LH Cooling with a CPU Pot for those volts, if not that guy is an idiot.

:) I knew someone was going to say this. Now relax, don't turn a flame into a fire. Although it is true what I said. This forum does NOT evolve around topics like this, and you and I both konw that. Although It would be nicer if they did have more sub-forums here about these subjects, then more overclockers would be here. Trust me you don't know much about this kind of stuff, that's because likley you're here at Neowin, a place that thrives more on other topics that people are more interested in and there's nothing wrong with that. My point still holds correct. I admire your insults though. Keep em commin'. I hope i'm encouraging you. ^^

You knew I was gonna quote Billy Madison? Jesus H. CHRIST MAN!!! Give me the California Lottery numbers for Wednesday!!

You sound like a bot.

.Yeah it can get very hot without proper cooling. I'm using hypercooling. My case is freezing cold, but I don't need to enable sub-zero cooling options in my EVGA mobo since the volts are so high it keeps the system at some pretty normal temps.

You my friend are quite mistaken. It's not the temperature that is in danger of damaging the CPU, it's the (that's right you guessed it!) VOLTAGE.

There have been CPU's that have suffered degradation from voltage even from running at 50C load.

http://www.anandtech.com/weblog/showpost.aspx?i=428

They fried their QX9650 with just over 1.45v in a 24 hour load test.

are you serious? :blink:

Not exactly, you missed the point of my last few points entirely lol tssk tssk

I am sure you are just filled with envy and only wish you had a system like this

lol Doesn't everybody have a system like this? Do you not know these things? Have you not been around or researched other forums? This is something you do not know, obviously.

....this system is capable of being the benchmark king in the right hands, and its already proven, as this exact setup (Core i7 + Quad GTX295's) holds the 3DMark Vantage record of P40k....

You've mistaken once again. It's not the I7 that's no good, or the 295's, but the proper dialing and adjustments and hardware, not to mention clocks and methods which this forum is unaware of. This is not a forum based entirely on systems like this, which was my point in the first place. Thanks.

and to say he seriously needs faster CPU & Graphics Processing is undoubtedly a retarded statement.

He paid almost 1k for the video cards, and the CPU around $249, so excuse me? Yes he does need a faster system with that kind of payment he laid down. Does this mean he needs 'another' system, and was jipped out of his wallet? NO. This basically means he needs to OC his system and get MORE than what he paid for. Yes you're right buddy, he DOES need a faster system so he gets every penny worth, and the whole point is, HE CAN ACHIEVE THIS WITH WHAT HE HAS. Goahead and question me some more Lucky ;)

Let's see those pictures of your Core i7 Extreme, with Quad SLI'd GTX295s or Tri-SLI'd 285s. Because it is so boringly standard now, right?..... :rofl:

lol you still don't understand me when I say "boringly standard". I was exaggurating a point which you're too dumb ot understand! (ooOO!) ;) And yes, I do have a system like this, that's my point, EVERYONE does. Do you not agree? Or do you not know these things? Doesn't mostly everyone have it now? Well, i guess you wouldn't know anything about that huh :) You post in neowin, this kind of stuff is unknown here.

It's actually running at basically 1.7v (effectively 1.693v). l

lol please avoid your boasting. There's no need to get tough. I know it feels good, but you need to have more self-control than this. 1.7 is the same, and if you knew what I was talking about you wouldn't have replied with this statement....

ok next.... :D

That thing will be fried within a few months, if not weeks if he really runs it 1.7vcore for 24/7 use. I am assuming that is just a benchmark session run and he was probably using either DICE, LN2, or LH Cooling with a CPU Pot for those volts, if not that guy is an idiot. BZZZ! wrong again lol You really need to look this stuff up to understand :) You sound so mad lol Good night buddy, relax and calm down, you will make more sense that way. Now... according to this reply you know nothing about these CPU's lol Should we even go there? His CPU will last him llight years longer then your guess.

You knew I was gonna quote Billy Madison? Jesus H. CHRIST MAN!!! Give me the California Lottery numbers for Wednesday!!

You sound like a bot.

lol I really need to practice my bot skills again. :) Billy Madison.

You my friend are quite mistaken. It's not the temperature that is in danger of damaging the CPU, it's the (that's right you guessed it!) VOLTAGE.

There have been CPU's that have suffered degradation from voltage even from running at 50C load.

http://www.anandtech.com/weblog/showpost.aspx?i=428

They fried their QX9650 with just over 1.45v in a 24 hour load test.

BZZZ! wrong lol Let me give you some homework. Look up VDROOP :) I'll be your teacher, you be my student. Now go, and look that up. I want you to find how voltages affect temperature fluctuation and you need to type on a peice of "paper" in detail what it does. I'll grade your paper :p

And by the way, this will not shorten the life span even to a fraction of death anytime soon, just incase you didn't know.

Also, you can't compare a Q9650 with an I7 lol they are entirely different when overclocking and react entirely different... ok you know what, that's enough! I will give you an assignment sheet on this as well... well, you need to complete your first assignment first.

err Marcus he said he didn't want to overclock it yet but will soon are you retarded? :D

no not everyone has these kind of Pc's some of us have to work for our money :)

wait till he over clocks it before you start bragging to him about how he needs to over clock it more for his e-peen to grow :p

but again no one really needs that much processing power for general use and theres no real point to it unless your pc sucks and you want more performance otherwise the i7 is powerful enough to do all the tasks you want and more

in the end who really cares about benchmark points if your comp can play your games flawlessly :p

That case went from $999 to $276 ??/ NOw THAT is a sale !!!

I love these threads, I get so sick of the "I have 4 dollars, but I want to play Crysis, can you help me ?"

or the " I cant afford anything good, so Im just gonna get an e-machine....will it play Crysis ?"

nice to see someone who says, "yeah I just dropped $2500 on this....so what ?!?"

nice job man, enjoy !

@Marcus --

not sure where to begin with this f*ckt*rd - you are either delirious, or just trolling - feeling all warm and safe behind your Compaq.

To say "everyone has this" you really think 1% of the total computer owning populous is "everyone" ??

What gives you the right to talk to someone like that -- nowhere was he bragging, or boasting, or even talking smack !

You are no teacher - youre the forum-equivalent to a scriptkiddie - you 1111111111 all over extremesystems.org wanting to "be one of them" ?

- dont come in here bashing neowin by telling someone they know nothing, hence the reason for posting in here --

I dont know if there is a God - but I hope nobody else shows you mercy when you open your mouth to someone in person -- maybe then you'll learn to be more respectful.

CLASS DISMISSED

Edited by TEX4S
@Marcus --

not sure where to begin with this f*ckt*rd - you are either delirious, or just trolling - feeling all warm and safe behind your Compaq.

To say "everyone has this" you really think 1% of the total computer owning populous is "everyone" ??

What gives you the right to talk to someone like that -- nowhere was he bragging, or boasting, or even talking smack !

You are no teacher - youre the forum-equivalent to a scriptkiddie - you 1111111111 all over extremesystems.org wanting to "be one of them" ?

- dont come in here bashing neowin by telling someone they know nothing, hence the reason for posting in here --

I dont know if there is a God - but I hope nobody else shows you mercy when you open your mouth to someone in person -- maybe then you'll learn to be more respectful.

CLASS DISMISSED

That pretty much sums up Marcus to a T. (Y) I don't have anything else to add, because further argument with this kid would only lead to him spreading more rumors of which he doesn't know sh*t about. :rolleyes:

I'd recommend the kid to a better known forum for dedicate overclocking / high end cooling such as liquid nitrogen, and liquid helium, but they wouldn't have any of him, he'd be banned within a day of joining. :laugh:

BZZZ! wrong lol Let me give you some homework. Look up VDROOP :) I'll be your teacher, you be my student. Now go, and look that up. I want you to find how voltages affect temperature fluctuation and you need to type on a peice of "paper" in detail what it does. I'll grade your paper :p

And by the way, this will not shorten the life span even to a fraction of death anytime soon, just incase you didn't know.

Also, you can't compare a Q9650 with an I7 lol they are entirely different when overclocking and react entirely different... ok you know what, that's enough! I will give you an assignment sheet on this as well... well, you need to complete your first assignment first.

There mere fact that you used Vdroop already indicates that you have no idea what you are talking about. I seriously dare you to go to Hard Forums or AnandTech forum and spew the garbage you're talking about right now. You'll get torn apart.

Vdroop is a SAFETY precaution for your processor. I have YET to see Vdroop/Vdrop past 0.2v (because if you say you have your voltage at 1.7, a 0.2v vDroop would put load voltage at 1.5v which by the way is still not safe for a 45nm chip for 24/7 use). So with that in mind, tell me how vDroop would save your CPU?

You can't compare a QX9650 to a Core i7? Well I hope you know that because of the integrated memory controller in Core i7, it's even MORE sensitive to voltage. Even increasing vDIMM past 1.85v (IF your board and RAM are of good quality)can cause permanent CPU damage (note, incomparison Core 2 vDIMM voltage can go as high as 2.3v)

http://www.anandtech.com/memory/showdoc.aspx?i=3426

Why else do you think they released low voltage DDR3 RAM when i7 came out? Because OCZ, Crucial, Corsair, Mushkin, Patriot and G.Skill all collectively wanted to do it for major kicks and giggles? Maybe their respective CEO's were like "OH SNAP, let's release some of this low voltage for the heck of it! Tell the other companies about it, it'll be the next best thing!"

May God have mercy on your hardware when you decide to build an i7 system. Here's a recommendation, buy a Dynex PSU for it. 100W will be enough to run it and SLI GTX 280's.

Edited by shift.
May God have mercy on your hardware when you decide to build an i7 system. Here's a recommendation, buy a Dynex PSU for it. 100W will be enough to run it and SLI GTX 280's.

Nah man, don't listen to shift, a 100w is overkill. Get a 65w Power supply, it'll be plenty for those SLI'd GTX280's and a i7 CPU, be sure to crank it up to full load to while its overclocked at like 4.5-5.0GHz with 1.6vcore, and run intel burn test & Prime95 at the same time, it'll stress test that computer of yours good, MarcusG.

When you see smoke coming from the motherboard, don't worry thats just the uber sub-zero cooling kicking in.

<Insert All messages from MarcusG>

Censored Version:

caoodaabi.jpg

I really can't take credit for this image, I found it a long time ago on a popular Social News website and thought it applied well to the events here.

Uncensored Version: http://www.arinmorf.com/wp-content/uploads...3/20040319h.jpg

That case went from $999 to $276 ??/ NOw THAT is a sale !!!

Thanks, It went down some more this week to 199+8.25% tax, let me know if Dallas Fry's is out of it. I can secure one for you from Austin.

i want the wallpaper on your tv haha

Here it is dude (attachment did not work for some reason)

Click Here

Everyone ignore Marcus please, we dont need to entertain him and argue anymore. That's what he wants :huh:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Nothing kills CMF Phone 2 Pro's successor due to rising memory prices by Hamid Ganji Storage and RAM prices have been rising over the past year, leading to a significant increase in the cost of electronics for customers around the world. Many companies are now revising their plans for upcoming devices due to higher component costs and overall production expenses. CMF is the latest company to cancel the successor to one of its best-selling phones due to rising memory prices. CMF is a sub-brand of Nothing and focuses on making budget smartphones for growing markets. The brand launched the CMF Phone 2 Pro last year with some eye-catching specifications and an affordable price. While many customers may have been waiting for a successor this year, one of the company’s executives has announced that CMF will not release a new smartphone this year. And AI is to blame. As Nothing co-founder Akis Evangelidis announced on X, the company has been working on a successor to the CMF Phone 2 Pro, but with current memory prices, it cannot “build a phone that feels like a genuine step forward at a price that makes sense for CMF.” So, no new CMF phone will be launched this year. Meanwhile, Evangelidis said the company still has several new products in the pipeline, including some in entirely new categories. He added that the Nothing brand will also continue launching new products through 2026. Budget smartphones are among the first victims of the surge in RAM and memory prices, as they have become more expensive to build. The sharp increase in memory costs could also reshape the traditional price ranges associated with budget phones. Apple CEO Tim Cook also recently said that price increases for some of the company’s products are unavoidable because RAM and memory have become significantly more expensive this year. Analysts estimate that the base price of the upcoming iPhone 18 Pro could rise to $1,399 due to current market shortages.
    • Nudge me when they bring back hardware audio acceleration so I can get my EAX 5 back. We've evolved graphics to real-time path tracing, but regressed audio some 15 years back in time with this stupid software audio stack.
    • Ocenaudio 3.19.4 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.4 changelog: Adds fallback fonts so every language and symbol displays correctly Improves autosave and session recovery stability Improves region navigation and display Fixes a crash when the level meter is used on displays with a scaling greater than 200% Fixes memory corruption when using the silence selection tools Fixes crashes when closing a file while effects are still being processed Fixes a freeze when applying effects to many files at once (macOS) Fixes crashes related to audio devices on Windows Fixes invalid file names when exporting regions whose label is used as the file name Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hasleo Disk Clone 5.8.2.1 by Razvan Serea Hasleo Disk Clone is a free and all-in-one disk cloning software for Windows 11/10/8/7/Vista and Windows Server that can help you migrate Windows OS to another disk, clone one disk to another disk or clone one partition to another location quickly and efficiently. Completely Free Windows Migration and Disk/Partition Cloning Software Migrate Windows from one disk to another without reinstalling Windows, apps. Clone one disk to another and makes the data on 2 disks are exactly the same. Clone a partition to another location without losing any data. Easily adjust the size and location of the destination partition. Convert MBR to GPT or convert GPT to MBR by cloning. Creation of Windows PE emergency disk. Extremely fast cloning speed and multi-language support. Supported OS: Windows Vista/Server 2008 or later, fully compatible with GPT and UEFI. Hasleo Disk Clone 5.8.2.1 changelog: Fixed an issue that caused disk enumeration to fail Fixed an issue where WinPE created under Windows ARM64 26H1 did not work properly Download: Hasleo Disk Clone 5.8.2.1 | 32.3 MB (Freeware) Link: Hasleo Disk Clone Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • This got me thinking, would you rather a self driving car prioritise protecting its passengers or everyone else? I'd choose the one that keeps me and my kids safest. At some point, these cars have to make those choices already, don't they? Wonder if we have a way to find out what way they lean.
  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      546
    2. 2
      +Edouard
      187
    3. 3
      Michael Scrip
      78
    4. 4
      PsYcHoKiLLa
      74
    5. 5
      neufuse
      71
  • Tell a friend

    Love Neowin? Tell a friend!