Speedup Vista to the Max !


Recommended Posts

After being a lurker for a long time , here's my first post . I hope you all like it.

Had posted it at another forum I was active on, so why not post it here :)

SECTION 1 - SPEED UP

DISABLE USER ACCOUNT CONTROL

First of all lets start by disabling the most annoying 'feature' of Vista , UAC.

Right Click on Command Promt and click on Run As Administrator

and paste this command and hit enter

C:\Windows\System32\cmd.exe /k %windir%\System32\reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLUA /t REG_DWORD /d 0 /f

SPEEDUP BOOT

UAC DISABLED? SPEEDUP BOOT

If you choose to disable UAC then you might have noticed [ or not ] bit of slowdown in your boot time , this is because the UAC driver is still loaded during startup ,which is unnecessary and can be disable by doing this

Windows Registry Editor Version 5.00 

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\luafv] 
"Start"=dword:00000004

SPEEDUP BOOT ON A MULTICORE PROCESSOR

Do you have a multi - core processor ? If so , you have another reason to smile about . Vista normally uses only 1 core at boot time which makes the boot slightly slower , so here is how to make use of all the cores and speedup boot

Start - Run - Type in msconfig - Boot - Advanced Options - Tick on Number of Processors - Select the maximum number [ that should be the number of processor cores ] - Click Ok - ok

141789i.png

Wait! Dont close MSCONFIG Yet

youll need it for the next tweak

SPEEDUP BOOT BY DISABLING BOOT SCREEN NO GUI BOOT

This will disable the usual vista boot screen and speed up boot by a few seconds , also this enables a better boot screen

Caution ; Your Scheduled boot time defrags and disk checks will be cancelled or they will run with a black screen - you cannot see the progress

Start - Run - Type in msconfig - Boot

Check No GUI Boot

Check on Make All Boot Settings Permanent

REMOVE THE BLACK SCREEN BEFORE LOGON AND SAVE 2 SECONDS BOOT - TIME

Do you get a 2 -3 second blank screen before logon ?

Transient Multimon Manager (TMM) is a Microsoft Windows Vista operating system feature targeted at improving the user experience of connecting and disconnecting displays, particularly for the mobile user. This is the 2-3 second delay followed by a blank black screen as Vista searches for monitor changes when you startup Vista. For more information on TMM, see: Microsoft: Transient Multimon Manager (TMM)

TMM is enabled by default in Vista. Disabling TMM will get rid of that 2-3 second delay at startup.

Heres how ,

Open the Start Menu.

A) Click All Programs -> Accessories -> System Tools -> Task Schedular.

In the left pane, expand Task Scheduler, Task Scheduler Library, Microsoft, Windows, and click on MobilePC.

4. In the middle pane, right click on TMM.

Disable TMM

SPEEDUP STORAGE DEVICES

ENABLE ADVANCED HARD DISK PERFORMANCE

This setting increases hard disk performance further , however you need to have backup power supply for the hard drive to prevent data loss

Here are the steps to enable the tweak

-Right Click On My Computer

-Properties

-Advanced System Settings

-Hardware

-Device Manager

-Expand 'Disk Drives'

-Double Click your hard drive to enter into its properties

-Policies

-Check Mark the following settings

ENABLE WRITE CACHING ON THE DISK

ENABLE ADVANCED PERFORMANCE

2vbsjk0.png

This tweak also works for removable drives , but instead, you' ll find this option

OPTIMIZE FOR PERFORMANCE , which can be enabled

SPEEDUP NTFS FILE SYSTEM

> DISABLE LAST ACCESS TIME

By default, each file and folder on an NTFS volume has an attribute called Last Access Time, which records the last time the file or folder was opened, read, or changed. This means even when you read a file on an NTFS volume, a write action occurs on that volume too. Normally this isn't a problem, but if you have an application that tends to frequently access files for short periods of time, this feature of NTFS can really slow performance. Fortunately, you can use fsutil to disable writing to the Last Access Time attribute

WARNING : DO NOT use this tweak if you use superfetch

Type this in the Command Prompt

fsutil behavior set disablelastaccess 1

> DISABLE SHORT FILENAMES

By default, NTFS creates an 8.3 filename every time it creates a long filename, which adds a bit of time to the file creation process. To speed things up, you can disable short filenames using the fsutil command:

fsutil behavior set disable8dot3 1

> SPEEDUP NTFS FILE ACCESS BY ALLOCATING MORE RAM FOR NTFS

This is one of the undocumented tweaks whic actually work , that have spread on the internet

You need to have lots of ram [ more than 2 GB is recommended ] for this tweak to really speed things up , if not it will decrease performance drastically

fsutil behavior set memoryusage 2

NtfsMemoryUsage = 1 (Normal = 1, Increased = 2; Default = 1)

Change it back to 1 if you have problems

MAKE THE VISTA GUI MORE SNAPPIER/RESPONSIVE

> ADJUSTING VISUAL STYLE SETTINGS

Type this in your Search box in ur start menu and hit enter

SystemPropertiesPerformance

Experiment with different settings that suit your needs

This screenshot shows the best set of options for max speed and appearance

2ccpiqw.png

> DISABLING TASKBAR THUMBNAILS

This feature might take up some amount of RAM n CPU , if you dont find this feature that useful , you can squeeze some speed

Right Click on the Taskbar

Propeties

Taskbar Tab

Untick Show window previews [Thumbnails]

> DISABLE AERO TRANSPERANCY

If your GUI feels slow even now , consider disabling the Transpency effects and also disabling Aero

SPEEDUP SHUTDOWN AND AUTOMATICALLY CLOSE NON RESPONDING PROGRAMS

Windows Registry Editor Version 5.00 

[HKEY_CURRENT_USER\Control Panel\Desktop] 
"AutoEndTasks"="1" 
"HungAppTimeout"="1000" 
"WaitToKillAppTimeout"="2000" 
"LowLevelHooksTimeout"="1000" 

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control] 
"WaitToKillServiceTimeout"="2000"

--------------------------------------------------------------------------------------

DISABLE PAGING OF KERNEL

This will force the kernel to your memory to speed things up

Windows will use more RAM to give better performance

So , Use this tweak if you have 1.5 GB ram or more

Windows Registry Editor Version 5.00 

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management] 
"DisablePagingExecutive"=dword:00000001

---------------------------------------------------------------------------------------

OPTIMIZE POWER PROFILES

Vista's power saving profiles probably do not allow your processor to use power saving features like SpeedStep etc. Vista sets a minimum 5% CPU usage, my guess is , it wont allow the processor to step down its frequency when idle. So here's how to fix this.

Go to Control Panel --> Hardware and Sound--> Power Options

Click Change Plan Settings and Change Advanced Power Settings

[+]Processor Power Management

[+]Minimum Processor State

Set the value for Plugged In to 0 %. Click ok to save the changes.

What I observed was my processor was running at full frequency , even on idle [ not gaming or encoding ] . After this change, it ran at about 60% of the frequency at idle. reducing power and temperatures, and increased it to full throttle in load conditions

-----------------------------------------------------------------------------------------

SPEEDUP FOLDER BROWSING

> DISABLE AUTOMATIC NETWORK PRINTER SEARCH

When browsing through shared folders and network computers Explorer can slow down when it is searching the local network for printers. This sounds like a great feature and may be useful for some but I would rather disable it to get maximum performance when browsing through folders.

1. Hit Alt to bring up the menubar if it is not already on the screen.

2. Click on Tools and select Folder Options.

3. On the View Tab, uncheck Automatically search for network printers.

If you dont find that option , you can use this registry tweak

Windows Registry Editor Version 5.00 

[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\RemoteComputer]

Both have the same affect though

> REDUCING DETAIL IN MY COMPUTER WINDOW FOR SPEED

This tweak gives the maximum speed while browsing through folders , but might not give much info on the selected file

Go to My Computer

Organise

Layout

Experiment with the 4 options that suit your needs.

DISABLE UN- NEEDED SERVICES

This is one of the most significant tweaks of em all .

Vista has loads of services running in background eating your precious RAM doing nothing useful.

It difficult to suggest a perfect services configuration as our feature choices may be different

So here is a good guide that will help you choose what services you can disable safely

http://tweakhound.com/vista/tweakguide/page_7.htm 
http://www.blackviper.com/WinVista/servicecfg.htm

I recommend using ServiceTweaker, to enable/disable services easily

http://www.ajuaonline.com/downloads/

SECTION 2 - INTERNET & NETWORKING

Use these commands in the command prompt

DISABLE VISTA AUTO TUNING FEATURE

This feature is known to cause problems with downloading etc. I recommend you disable it.

netsh int tcp set global autotuninglevel=disabled

ENABLE COMPOUND TCP TO IMPROVE NETWORK THROUGHPUT

netsh int tcp set global congestionprovider=ctcp

DISABLE ECN CAPABILITY

netsh int tcp set global ecncapability=disabled

REDUCE CPU LOAD

Apply these tweaks to reduce cpu load while networking.

ENABLE TCPIP CHIMNEY

netsh int tcp set global chimney=enabled

ENABLE RECIEVE SIDE SCALING

netsh interface tcp set global rss=enable

ENABLE NETDMA

Windows Registry Editor Version 5.00 

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters] 
"EnableTCPA"=dword:00000001

For more information and documentation about these tweaks, check these links

http://www.kitz.co.uk/adsl/vistaTCPtweaks.htm 
http://www.speedguide.net/read_articles.php?id=2574

SPEEDUP NETWORKING WHILE RUNNING MULTIMEDIA APPLICATIONS

Windows Vista throttles your network bandwidth when you are playing any multimedia file such as an MP3 or a video. This was designed to ensure the CPU has enough free cycles available to play your media without skipping. The down side is that when you are playing a multimedia file you will notice that your network speed of file transfers will decrease on high speed network connections. By default when you are playing a multimedia file your network transfers are limited to 10 packets per millisecond.

In Windows Vista SP1 Microsoft introduces a registry key that allows you to customize this setting.

http://tweakvista.com/article39258.aspx

Apply this tweak only if you have a reasonably powerful processor.

DISABLE IP6 SUPPORT

Most of the internet today is based on IP4 , so you wont be needing IP6 support on vista , and hence can save some resources, but before applying this tweak please check your connection type

Windows Registry Editor Version 5.00 

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters] 
"DisabledComponents"=dword:000000ff

This turns off IP6 support completely !

SECTION 3 - CUSTOMIZE

Master Control Panel - All Windows Options in ONE WINDOW

Create a shortcut with this filename

C:\Windows\explorer.exe shell:::{ED7BA470-8E54-465E-825C-99712043E01C}

a2bxig.png

REMOVE UNNECESSARY VISTA FEATURES

Do this :

Control Panel - Programs & Features - Turn Windows Features On or Off

http://i39.tinypic.com/168g10i.png

QUICK ACCESS TO ADD REMOVE PROGRAMS AND DEVICE MANAGER

2116s9f.png

Windows Registry Editor Version 5.00 

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell] 
@="none" 

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Control Panel] 

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Control Panel\command] 
@=hex(2):72,00,75,00,6e,00,64,00,6c,00,6c,00,33,00,32,00,2e,00,65,00,78,00,65,\ 
00,20,00,73,00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,\ 
2c,00,43,00,6f,00,6e,00,74,00,72,00,6f,00,6c,00,5f,00,52,00,75,00,6e,00,44,\ 
00,4c,00,4c,00,00,00 

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\DevMgr] 
@=hex(2):40,00,25,00,77,00,69,00,6e,00,64,00,69,00,72,00,25,00,5c,00,73,00,79,\ 
00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,64,00,65,00,76,00,6d,00,67,00,\ 
72,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,34,00,00,00 
"SuppressionPolicy"=dword:4000003c 

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\DevMgr\command] 
@=hex(2):25,00,77,00,69,00,6e,00,64,00,69,00,72,00,25,00,5c,00,73,00,79,00,73,\ 
00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,6d,00,63,00,2e,00,65,00,78,00,\ 
65,00,20,00,2f,00,73,00,20,00,25,00,77,00,69,00,6e,00,64,00,69,00,72,00,25,\ 
00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,64,00,65,00,\ 
76,00,6d,00,67,00,6d,00,74,00,2e,00,6d,00,73,00,63,00,00,00 

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Software] 

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Software\command] 
@=hex(2):63,00,6f,00,6e,00,74,00,72,00,6f,00,6c,00,20,00,61,00,70,00,70,00,77,\ 
00,69,00,7a,00,2e,00,63,00,70,00,6c,00,00,00

SHOW HIDDEN DEVICES IN DEVICE MANAGER

This option enables you to see hidden / disconnected devices in device manager, useful when you cant find which driver is causing the problem

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment]

"DEVMGR_SHOW_NONPRESENT_DEVICES"="1"

-------------------------------------------------------------------------------------------

DISABLE AUTOMATIC FOLDER TYPE DISCOVERY

Vista automatically sets the template to a folder and doesnt let you change it properly and even if you change it , vista changes it back , that ****ed me off , so I used this tweak

So here is a tweak to disable it

Windows Registry Editor Version 5.00 

; Reset and delete all saved folder customizations and settings. 
[-HKEY_CURRENT_USER\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell\BagMRU] 
[-HKEY_CURRENT_USER\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell\Bags] 

; Turn off Vista auto folder type template discovery. 
[HKEY_CURRENT_USER\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell\Bags\AllFolders\Shell] 
"FolderType"="NotSpecified"

------------------------------------------------------------------------------------------

QUICK ACCESS TO VISTA NETWORK CONNECTION STATUS

Accessing network connection options in vista isnt as easy in XP , youll have to dig through several screens etc

Heres a better and faster way to access it

type in the search box

ncpa.cpl

Viola!

-------------------------------------------------------------------------------------------

SLOW MOTION AERO - Eye Candy at its best

If you are using Aero interface with all the animations , youll love this tweak

Windows Registry Editor Version 5.00 

[HKEY_CURRENT_USER\Software\Microsoft\Windows\DWM] 
"AnimationsShiftKey"=dword:00000001

Hold SHIFT while minimizing or maximizing windows to see the animation in slow motion

SECTION 4 SAVE HARD DISK SPACE

DISABLE HIBERNATION

If you dont use Hibernation for your computer , you better disable it as it takes up loads of space on hdd

powercfg.exe –H off

-------------------------------------------------------------------------------------------

DISC CLEANUP EXTRA CLEANING OPTIONS

You might have noticed that the normal Disk Cleanup utility doesnt have much options for cleanup , so here is a command to enable further cleaning options

%SystemRoot%\System32\Cmd.exe /c Cleanmgr /sageset:65535 & Cleanmgr /sagerun:65535

REMOVE PRE - SP1 BACKUP FILES

Installed Vista SP1 using that stand alone installer ? If you are happy with SP1 and are not uninstalling it , you can save some space by removing the backup files pre -sp1 installtion

vsp1cln.exe

Note - You cannot uninstall SP1 after running the above command!

Edited by lordvj
Link to comment
https://www.neowin.net/forum/topic/739386-speedup-vista-to-the-max/
Share on other sites

There is absolutely nothing "great" about this guide. Using this guide will cause more problems that it "solves". I put solves in quotes because there are no problems in the first place. The only magical speed up for Windows (not just Vista) is to have everything up-to-date, which includes Windows, third-party software and drivers. The other way is to update your hardware.

It's pretty simple. Fight against Vista and you will have problems. Leave Vista with its default settings, and you will have a great experience with the OS.

Depends what ones you use.

I have already done two of them before reading.

Not really that much.

Ultimate Windows Tweaker v1.1 does some great tweaks for nada.

http://www.winvistaclub.com/ is where you can get the app plus lots of more advice.

Following this guide is like putting your hand in front of a lion. You're just asking for something to go wrong. It's much wiser to not tamper with settings like that and just keep your OS up to date in terms of drivers, security updates, etc.

The fact that your first point is dablign UAC, shows how little you actually understand Vista.

^ What he said.

And copying content from other sources (even BAD content) without attribution is not the best way to introduce yourselef to the forum ;)

Oh c'mon guys, he was obviously trying.

What is it with Neowin being impolite recently?

Thanks for the guide mate. Although it may not be benificial, we ALL respect your creative input, regardless of weather you sourced from another place or some of the information may not be 100% great. Its the input that counts though.

Doing everything in this guide might be good for someone who is never going to change what they do with their computer. Otherwise, in the future when you want to use any of those features you disabled, you'll wonder why they aren't working and/or how to fix them. In the end it can wind up being a lot more hassle than it's worth. You have to ask yourself if the small increase in speed is worth potential problems down the road.

This is a really good list of tweaking myths and no-nos. Ive never seen so many in one place before. Im actually gonna save this as a reference of things not to do as I do forget sometimes and actually implement some of these from time to time after a format. Plus its an aesthetically pleasing list in its structure. Thanks man!

How is clicking one extra button a pain in the ass?

It quickly becomes a lot of clicks. I've never use it, and i probably never will since i dont see the point in it.. Its made by idiots for idiots.. Im not saying you guys are idiots but its seriously just something to make Vista more idiot-safe, which i don't need.

If you know what youre doing with your computer, you might as well disable it.

It quickly becomes a lot of clicks. I've never use it, and i probably never will since i dont see the point in it.. Its made by idiots for idiots.. Im not saying you guys are idiots but its seriously just something to make Vista more idiot-safe, which i don't need.

If you know what youre doing with your computer, you might as well disable it.

You also obviusly don't know what UAC actualy does, outside of giving you a dialog box. but it's a lot more than that.

It quickly becomes a lot of clicks. I've never use it, and i probably never will since i dont see the point in it.. Its made by idiots for idiots.. Im not saying you guys are idiots but its seriously just something to make Vista more idiot-safe, which i don't need.

If you know what youre doing with your computer, you might as well disable it.

So how do you know if it's a "pain in the ass" if you proclaim to have never even tried it?

And there is always silent mode which is a better alternative to turning it completely off.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Meta announces a major leadership change at WhatsApp by Pradeep Viswanathan Meta has announced a major leadership change at WhatsApp, with Will Cathcart stepping down after seven years of leading the world's largest messaging platform. CRED CEO and founder Kunal Shah will take over as the next global head of WhatsApp. CRED is an Indian fintech company focused on creditworthy consumers. As part of the transition, Meta is also making a minority investment in CRED through its Series H funding round. Meta CEO Mark Zuckerberg said Will Cathcart will remain at Meta and move into a new role focused on building new products from the ground up. Cathcart led WhatsApp during a major growth phase, helping the app reach more than 3 billion users worldwide. He also played a key role in expanding WhatsApp’s business offerings while keeping privacy and end-to-end encryption central to the product. Meta’s Chief Product Officer, Chris Cox, said Kunal Shah was selected after a search for a leader who understands WhatsApp’s global scale and future potential. In a leaked internal memo, Cox described Shah as a “serial founder” and one of India’s most respected entrepreneurs, adding that he brings “entrepreneurial energy” and a strong product mindset to the role. As part of the Series H funding round, CRED is raising ₹8,550 crore, or about $900 million, in a round led by Meta. The funding values CRED at ₹43,239 crore, or about $4.5 billion, on a post-money basis. It is important to note that this investment will not give Meta access to CRED customer information. Kunal posted the following on X regarding his new role at Meta: Although Kunal Shah will be stepping away from his operating role as CRED CEO, he will retain his personal shareholding in the company.
    • It wouldn't be hard for me to turn off my TV, if I had one. For one thing, I never scroll Instagram. The only reason I have an account is because Meta created one when it merged the account systems for its various services.
    • OpenAI's new GPT-5.5-Cyber tops Claude Mythos 5 in vulnerability benchmark by Pradeep Viswanathan OpenAI today announced a major expansion of Daybreak, a cybersecurity initiative designed to help defenders find, validate, and fix software vulnerabilities earlier in the development process. The availability of powerful AI models has definitely changed the cybersecurity landscape by making vulnerability discovery much faster. However, the bigger bottleneck for the industry is now patching those vulnerabilities. Impacted software teams need to validate the discovered issues, understand their impact, develop fixes, test them, and deploy patches. Back in March, OpenAI launched a preview of Codex Security, which uses agentic reasoning with automated validation to discover high-impact issues and actionable fixes specific to the codebase. Since then, it has scanned more than 30 million commits across over 30,000 codebases; more than 70,000 findings were marked as fixed by human reviewers, while over 500,000 findings were automatically determined to be fixed. Now, OpenAI is releasing an updated Codex Security plugin that can run deep scans, review recent code changes, generate security reports, trace attack paths, validate findings, and create codebase-specific patches for human review. It can also triage findings from existing scanners, advisories, bug bounty reports, and ticketing systems. OpenAI says the plugin can export results to vulnerability management systems and integrate with workflows using SARIF files, CodeQL queries, the Codex CLI, and the Codex app. Back in May, OpenAI announced the preview of GPT-5.5-Cyber, a new model built on top of the recently released GPT-5.5, designed for specialized cybersecurity work. Today, OpenAI launched the full version of GPT-5.5-Cyber through a limited release for verified defenders. On CyberGym, GPT-5.5-Cyber scored 85.6%, compared with 81.8% for GPT-5.5 and 83.8% for Claude Mythos 5. It also scored 39.5% on ExploitGym, compared with 25.95% for GPT-5.5, and 69.8% on SEC-bench Pro, compared with 63.1%. OpenAI also announced the new Daybreak Cyber Partner Program, which will allow security vendors and service providers to use GPT-5.5 with Trusted Access for Cyber in their products and services. Accenture, Akamai, Cisco, Cloudflare, CrowdStrike, IBM, Palo Alto Networks, Proofpoint, SentinelOne, Wiz, Zscaler, and others were listed as initial partners for this program. OpenAI is also launching Patch the Planet with Trail of Bits, HackerOne, Calif, researchers, and maintainers. More than 30 open-source projects have committed to participate, including cURL, Go, Python, Sigstore, and pyca/cryptography.
    • AMD confirms 26.6.2 FSR driver breaks on many Windows PCs by Sayan Sen Earlier today AMD released a major graphics driver update as it brings support for FSR 4.1 to Radeon RX 7000 series GPUs. The new update, version 26.6.2, also brings support for Assassin's Creed Black Flag Resynced and more. And while the driver technically supports Windows 10 version 21H2 and newer, the tech giant has confirmed that there is a major issue with the new driver on non-Windows 11 PCs as it fails to launch properly on such systems. The error message says, "The version of AMD Software that you have launched is not compatible with your currently installed AMD graphics driver." Therefore on the surface it looks like a compatibility problem. AMD has also confirmed that the device manager will display the yellow bang or yellow exclamation sign alongside your GPU under the Display adapters dropdown. Here is what the Radeon team's official advisory recommends to affected users: "Users Running Windows 10 and AMD Software: Adrenalin Edition 26.6.2 May Encounter Yellow Bang in Device Manager Affecting AMD Radeon RX Series Graphics ... Our Engineers are currently investigating this issue and will provide a fix once it is available. Affected users may revert to AMD Software: Adrenalin Edition 26.6.1 as a temporary workaround." As such you should revert back to the previous 26.6.1 driver which was released earlier this month. In case you were looking to play Assassin's Creed Black Flag Resynced and DOOM: The Dark Ages | Revelations you will probably have to wait a while if you want the driver to support those games officially. You can find the support article here on Microsoft's website.
  • Recent Achievements

    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
    • Dedicated
      tuben earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      208
    3. 3
      PsYcHoKiLLa
      98
    4. 4
      Michael Scrip
      89
    5. 5
      neufuse
      71
  • Tell a friend

    Love Neowin? Tell a friend!