Speedup Vista to the Max !


Recommended Posts

After being a lurker for a long time , here's my first post . I hope you all like it.

Had posted it at another forum I was active on, so why not post it here :)

SECTION 1 - SPEED UP

DISABLE USER ACCOUNT CONTROL

First of all lets start by disabling the most annoying 'feature' of Vista , UAC.

Right Click on Command Promt and click on Run As Administrator

and paste this command and hit enter

C:\Windows\System32\cmd.exe /k %windir%\System32\reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLUA /t REG_DWORD /d 0 /f

SPEEDUP BOOT

UAC DISABLED? SPEEDUP BOOT

If you choose to disable UAC then you might have noticed [ or not ] bit of slowdown in your boot time , this is because the UAC driver is still loaded during startup ,which is unnecessary and can be disable by doing this

Windows Registry Editor Version 5.00 

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\luafv] 
"Start"=dword:00000004

SPEEDUP BOOT ON A MULTICORE PROCESSOR

Do you have a multi - core processor ? If so , you have another reason to smile about . Vista normally uses only 1 core at boot time which makes the boot slightly slower , so here is how to make use of all the cores and speedup boot

Start - Run - Type in msconfig - Boot - Advanced Options - Tick on Number of Processors - Select the maximum number [ that should be the number of processor cores ] - Click Ok - ok

141789i.png

Wait! Dont close MSCONFIG Yet

youll need it for the next tweak

SPEEDUP BOOT BY DISABLING BOOT SCREEN NO GUI BOOT

This will disable the usual vista boot screen and speed up boot by a few seconds , also this enables a better boot screen

Caution ; Your Scheduled boot time defrags and disk checks will be cancelled or they will run with a black screen - you cannot see the progress

Start - Run - Type in msconfig - Boot

Check No GUI Boot

Check on Make All Boot Settings Permanent

REMOVE THE BLACK SCREEN BEFORE LOGON AND SAVE 2 SECONDS BOOT - TIME

Do you get a 2 -3 second blank screen before logon ?

Transient Multimon Manager (TMM) is a Microsoft Windows Vista operating system feature targeted at improving the user experience of connecting and disconnecting displays, particularly for the mobile user. This is the 2-3 second delay followed by a blank black screen as Vista searches for monitor changes when you startup Vista. For more information on TMM, see: Microsoft: Transient Multimon Manager (TMM)

TMM is enabled by default in Vista. Disabling TMM will get rid of that 2-3 second delay at startup.

Heres how ,

Open the Start Menu.

A) Click All Programs -> Accessories -> System Tools -> Task Schedular.

In the left pane, expand Task Scheduler, Task Scheduler Library, Microsoft, Windows, and click on MobilePC.

4. In the middle pane, right click on TMM.

Disable TMM

SPEEDUP STORAGE DEVICES

ENABLE ADVANCED HARD DISK PERFORMANCE

This setting increases hard disk performance further , however you need to have backup power supply for the hard drive to prevent data loss

Here are the steps to enable the tweak

-Right Click On My Computer

-Properties

-Advanced System Settings

-Hardware

-Device Manager

-Expand 'Disk Drives'

-Double Click your hard drive to enter into its properties

-Policies

-Check Mark the following settings

ENABLE WRITE CACHING ON THE DISK

ENABLE ADVANCED PERFORMANCE

2vbsjk0.png

This tweak also works for removable drives , but instead, you' ll find this option

OPTIMIZE FOR PERFORMANCE , which can be enabled

SPEEDUP NTFS FILE SYSTEM

> DISABLE LAST ACCESS TIME

By default, each file and folder on an NTFS volume has an attribute called Last Access Time, which records the last time the file or folder was opened, read, or changed. This means even when you read a file on an NTFS volume, a write action occurs on that volume too. Normally this isn't a problem, but if you have an application that tends to frequently access files for short periods of time, this feature of NTFS can really slow performance. Fortunately, you can use fsutil to disable writing to the Last Access Time attribute

WARNING : DO NOT use this tweak if you use superfetch

Type this in the Command Prompt

fsutil behavior set disablelastaccess 1

> DISABLE SHORT FILENAMES

By default, NTFS creates an 8.3 filename every time it creates a long filename, which adds a bit of time to the file creation process. To speed things up, you can disable short filenames using the fsutil command:

fsutil behavior set disable8dot3 1

> SPEEDUP NTFS FILE ACCESS BY ALLOCATING MORE RAM FOR NTFS

This is one of the undocumented tweaks whic actually work , that have spread on the internet

You need to have lots of ram [ more than 2 GB is recommended ] for this tweak to really speed things up , if not it will decrease performance drastically

fsutil behavior set memoryusage 2

NtfsMemoryUsage = 1 (Normal = 1, Increased = 2; Default = 1)

Change it back to 1 if you have problems

MAKE THE VISTA GUI MORE SNAPPIER/RESPONSIVE

> ADJUSTING VISUAL STYLE SETTINGS

Type this in your Search box in ur start menu and hit enter

SystemPropertiesPerformance

Experiment with different settings that suit your needs

This screenshot shows the best set of options for max speed and appearance

2ccpiqw.png

> DISABLING TASKBAR THUMBNAILS

This feature might take up some amount of RAM n CPU , if you dont find this feature that useful , you can squeeze some speed

Right Click on the Taskbar

Propeties

Taskbar Tab

Untick Show window previews [Thumbnails]

> DISABLE AERO TRANSPERANCY

If your GUI feels slow even now , consider disabling the Transpency effects and also disabling Aero

SPEEDUP SHUTDOWN AND AUTOMATICALLY CLOSE NON RESPONDING PROGRAMS

Windows Registry Editor Version 5.00 

[HKEY_CURRENT_USER\Control Panel\Desktop] 
"AutoEndTasks"="1" 
"HungAppTimeout"="1000" 
"WaitToKillAppTimeout"="2000" 
"LowLevelHooksTimeout"="1000" 

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control] 
"WaitToKillServiceTimeout"="2000"

--------------------------------------------------------------------------------------

DISABLE PAGING OF KERNEL

This will force the kernel to your memory to speed things up

Windows will use more RAM to give better performance

So , Use this tweak if you have 1.5 GB ram or more

Windows Registry Editor Version 5.00 

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management] 
"DisablePagingExecutive"=dword:00000001

---------------------------------------------------------------------------------------

OPTIMIZE POWER PROFILES

Vista's power saving profiles probably do not allow your processor to use power saving features like SpeedStep etc. Vista sets a minimum 5% CPU usage, my guess is , it wont allow the processor to step down its frequency when idle. So here's how to fix this.

Go to Control Panel --> Hardware and Sound--> Power Options

Click Change Plan Settings and Change Advanced Power Settings

[+]Processor Power Management

[+]Minimum Processor State

Set the value for Plugged In to 0 %. Click ok to save the changes.

What I observed was my processor was running at full frequency , even on idle [ not gaming or encoding ] . After this change, it ran at about 60% of the frequency at idle. reducing power and temperatures, and increased it to full throttle in load conditions

-----------------------------------------------------------------------------------------

SPEEDUP FOLDER BROWSING

> DISABLE AUTOMATIC NETWORK PRINTER SEARCH

When browsing through shared folders and network computers Explorer can slow down when it is searching the local network for printers. This sounds like a great feature and may be useful for some but I would rather disable it to get maximum performance when browsing through folders.

1. Hit Alt to bring up the menubar if it is not already on the screen.

2. Click on Tools and select Folder Options.

3. On the View Tab, uncheck Automatically search for network printers.

If you dont find that option , you can use this registry tweak

Windows Registry Editor Version 5.00 

[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\RemoteComputer]

Both have the same affect though

> REDUCING DETAIL IN MY COMPUTER WINDOW FOR SPEED

This tweak gives the maximum speed while browsing through folders , but might not give much info on the selected file

Go to My Computer

Organise

Layout

Experiment with the 4 options that suit your needs.

DISABLE UN- NEEDED SERVICES

This is one of the most significant tweaks of em all .

Vista has loads of services running in background eating your precious RAM doing nothing useful.

It difficult to suggest a perfect services configuration as our feature choices may be different

So here is a good guide that will help you choose what services you can disable safely

http://tweakhound.com/vista/tweakguide/page_7.htm 
http://www.blackviper.com/WinVista/servicecfg.htm

I recommend using ServiceTweaker, to enable/disable services easily

http://www.ajuaonline.com/downloads/

SECTION 2 - INTERNET & NETWORKING

Use these commands in the command prompt

DISABLE VISTA AUTO TUNING FEATURE

This feature is known to cause problems with downloading etc. I recommend you disable it.

netsh int tcp set global autotuninglevel=disabled

ENABLE COMPOUND TCP TO IMPROVE NETWORK THROUGHPUT

netsh int tcp set global congestionprovider=ctcp

DISABLE ECN CAPABILITY

netsh int tcp set global ecncapability=disabled

REDUCE CPU LOAD

Apply these tweaks to reduce cpu load while networking.

ENABLE TCPIP CHIMNEY

netsh int tcp set global chimney=enabled

ENABLE RECIEVE SIDE SCALING

netsh interface tcp set global rss=enable

ENABLE NETDMA

Windows Registry Editor Version 5.00 

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters] 
"EnableTCPA"=dword:00000001

For more information and documentation about these tweaks, check these links

http://www.kitz.co.uk/adsl/vistaTCPtweaks.htm 
http://www.speedguide.net/read_articles.php?id=2574

SPEEDUP NETWORKING WHILE RUNNING MULTIMEDIA APPLICATIONS

Windows Vista throttles your network bandwidth when you are playing any multimedia file such as an MP3 or a video. This was designed to ensure the CPU has enough free cycles available to play your media without skipping. The down side is that when you are playing a multimedia file you will notice that your network speed of file transfers will decrease on high speed network connections. By default when you are playing a multimedia file your network transfers are limited to 10 packets per millisecond.

In Windows Vista SP1 Microsoft introduces a registry key that allows you to customize this setting.

http://tweakvista.com/article39258.aspx

Apply this tweak only if you have a reasonably powerful processor.

DISABLE IP6 SUPPORT

Most of the internet today is based on IP4 , so you wont be needing IP6 support on vista , and hence can save some resources, but before applying this tweak please check your connection type

Windows Registry Editor Version 5.00 

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters] 
"DisabledComponents"=dword:000000ff

This turns off IP6 support completely !

SECTION 3 - CUSTOMIZE

Master Control Panel - All Windows Options in ONE WINDOW

Create a shortcut with this filename

C:\Windows\explorer.exe shell:::{ED7BA470-8E54-465E-825C-99712043E01C}

a2bxig.png

REMOVE UNNECESSARY VISTA FEATURES

Do this :

Control Panel - Programs & Features - Turn Windows Features On or Off

http://i39.tinypic.com/168g10i.png

QUICK ACCESS TO ADD REMOVE PROGRAMS AND DEVICE MANAGER

2116s9f.png

Windows Registry Editor Version 5.00 

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell] 
@="none" 

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Control Panel] 

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Control Panel\command] 
@=hex(2):72,00,75,00,6e,00,64,00,6c,00,6c,00,33,00,32,00,2e,00,65,00,78,00,65,\ 
00,20,00,73,00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,\ 
2c,00,43,00,6f,00,6e,00,74,00,72,00,6f,00,6c,00,5f,00,52,00,75,00,6e,00,44,\ 
00,4c,00,4c,00,00,00 

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\DevMgr] 
@=hex(2):40,00,25,00,77,00,69,00,6e,00,64,00,69,00,72,00,25,00,5c,00,73,00,79,\ 
00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,64,00,65,00,76,00,6d,00,67,00,\ 
72,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,34,00,00,00 
"SuppressionPolicy"=dword:4000003c 

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\DevMgr\command] 
@=hex(2):25,00,77,00,69,00,6e,00,64,00,69,00,72,00,25,00,5c,00,73,00,79,00,73,\ 
00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,6d,00,63,00,2e,00,65,00,78,00,\ 
65,00,20,00,2f,00,73,00,20,00,25,00,77,00,69,00,6e,00,64,00,69,00,72,00,25,\ 
00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,64,00,65,00,\ 
76,00,6d,00,67,00,6d,00,74,00,2e,00,6d,00,73,00,63,00,00,00 

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Software] 

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Software\command] 
@=hex(2):63,00,6f,00,6e,00,74,00,72,00,6f,00,6c,00,20,00,61,00,70,00,70,00,77,\ 
00,69,00,7a,00,2e,00,63,00,70,00,6c,00,00,00

SHOW HIDDEN DEVICES IN DEVICE MANAGER

This option enables you to see hidden / disconnected devices in device manager, useful when you cant find which driver is causing the problem

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment]

"DEVMGR_SHOW_NONPRESENT_DEVICES"="1"

-------------------------------------------------------------------------------------------

DISABLE AUTOMATIC FOLDER TYPE DISCOVERY

Vista automatically sets the template to a folder and doesnt let you change it properly and even if you change it , vista changes it back , that ****ed me off , so I used this tweak

So here is a tweak to disable it

Windows Registry Editor Version 5.00 

; Reset and delete all saved folder customizations and settings. 
[-HKEY_CURRENT_USER\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell\BagMRU] 
[-HKEY_CURRENT_USER\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell\Bags] 

; Turn off Vista auto folder type template discovery. 
[HKEY_CURRENT_USER\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell\Bags\AllFolders\Shell] 
"FolderType"="NotSpecified"

------------------------------------------------------------------------------------------

QUICK ACCESS TO VISTA NETWORK CONNECTION STATUS

Accessing network connection options in vista isnt as easy in XP , youll have to dig through several screens etc

Heres a better and faster way to access it

type in the search box

ncpa.cpl

Viola!

-------------------------------------------------------------------------------------------

SLOW MOTION AERO - Eye Candy at its best

If you are using Aero interface with all the animations , youll love this tweak

Windows Registry Editor Version 5.00 

[HKEY_CURRENT_USER\Software\Microsoft\Windows\DWM] 
"AnimationsShiftKey"=dword:00000001

Hold SHIFT while minimizing or maximizing windows to see the animation in slow motion

SECTION 4 SAVE HARD DISK SPACE

DISABLE HIBERNATION

If you dont use Hibernation for your computer , you better disable it as it takes up loads of space on hdd

powercfg.exe –H off

-------------------------------------------------------------------------------------------

DISC CLEANUP EXTRA CLEANING OPTIONS

You might have noticed that the normal Disk Cleanup utility doesnt have much options for cleanup , so here is a command to enable further cleaning options

%SystemRoot%\System32\Cmd.exe /c Cleanmgr /sageset:65535 & Cleanmgr /sagerun:65535

REMOVE PRE - SP1 BACKUP FILES

Installed Vista SP1 using that stand alone installer ? If you are happy with SP1 and are not uninstalling it , you can save some space by removing the backup files pre -sp1 installtion

vsp1cln.exe

Note - You cannot uninstall SP1 after running the above command!

Edited by lordvj
Link to comment
https://www.neowin.net/forum/topic/739386-speedup-vista-to-the-max/
Share on other sites

There is absolutely nothing "great" about this guide. Using this guide will cause more problems that it "solves". I put solves in quotes because there are no problems in the first place. The only magical speed up for Windows (not just Vista) is to have everything up-to-date, which includes Windows, third-party software and drivers. The other way is to update your hardware.

It's pretty simple. Fight against Vista and you will have problems. Leave Vista with its default settings, and you will have a great experience with the OS.

Depends what ones you use.

I have already done two of them before reading.

Not really that much.

Ultimate Windows Tweaker v1.1 does some great tweaks for nada.

http://www.winvistaclub.com/ is where you can get the app plus lots of more advice.

Following this guide is like putting your hand in front of a lion. You're just asking for something to go wrong. It's much wiser to not tamper with settings like that and just keep your OS up to date in terms of drivers, security updates, etc.

The fact that your first point is dablign UAC, shows how little you actually understand Vista.

^ What he said.

And copying content from other sources (even BAD content) without attribution is not the best way to introduce yourselef to the forum ;)

Oh c'mon guys, he was obviously trying.

What is it with Neowin being impolite recently?

Thanks for the guide mate. Although it may not be benificial, we ALL respect your creative input, regardless of weather you sourced from another place or some of the information may not be 100% great. Its the input that counts though.

Doing everything in this guide might be good for someone who is never going to change what they do with their computer. Otherwise, in the future when you want to use any of those features you disabled, you'll wonder why they aren't working and/or how to fix them. In the end it can wind up being a lot more hassle than it's worth. You have to ask yourself if the small increase in speed is worth potential problems down the road.

This is a really good list of tweaking myths and no-nos. Ive never seen so many in one place before. Im actually gonna save this as a reference of things not to do as I do forget sometimes and actually implement some of these from time to time after a format. Plus its an aesthetically pleasing list in its structure. Thanks man!

How is clicking one extra button a pain in the ass?

It quickly becomes a lot of clicks. I've never use it, and i probably never will since i dont see the point in it.. Its made by idiots for idiots.. Im not saying you guys are idiots but its seriously just something to make Vista more idiot-safe, which i don't need.

If you know what youre doing with your computer, you might as well disable it.

It quickly becomes a lot of clicks. I've never use it, and i probably never will since i dont see the point in it.. Its made by idiots for idiots.. Im not saying you guys are idiots but its seriously just something to make Vista more idiot-safe, which i don't need.

If you know what youre doing with your computer, you might as well disable it.

You also obviusly don't know what UAC actualy does, outside of giving you a dialog box. but it's a lot more than that.

It quickly becomes a lot of clicks. I've never use it, and i probably never will since i dont see the point in it.. Its made by idiots for idiots.. Im not saying you guys are idiots but its seriously just something to make Vista more idiot-safe, which i don't need.

If you know what youre doing with your computer, you might as well disable it.

So how do you know if it's a "pain in the ass" if you proclaim to have never even tried it?

And there is always silent mode which is a better alternative to turning it completely off.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Dude, im talking about simply disable it from settings app. Because of the eu regulation, you could disable it here for years.
    • One big question about Mars was answered thanks to Einstein's 100 year old theory by Sayan Sen Image via DepositPhotos Scientists at the U.S. National Institute of Standards and Technology (NIST) have calculated how time passes on Mars compared with Earth, adding detail to how timekeeping would need to work beyond Earth’s orbit. The study, published in The Astronomical Journal, found that clocks on Mars run an average of 477 microseconds, or millionths of a second, faster per day than clocks on Earth. A microsecond is one millionth of a second, a very small unit used in precise scientific timing systems such as atomic clocks, which measure time using consistent atomic behavior. This difference is not constant. Because Mars moves around the Sun in a non-circular path (an eccentric orbit, meaning its distance from the Sun changes over time instead of staying fixed) and is affected by gravity from other bodies, the daily difference can vary by as much as 226 microseconds over a Martian year. The study also identifies smaller repeating changes of about 40 microseconds per day linked to synodic cycles (repeating periods that describe how planets line up with each other as they orbit the Sun from different positions). These longer patterns affect how time differences slowly rise and fall. To make these estimates, researchers compared Mars with Earth and the Moon. The work looks at relativistic proper time (the time actually measured by a clock depending on its speed and the strength of gravity where it is located, as described in Einstein’s relativity). This shows that each world has its own slightly different “rate” of time. This becomes more important as space missions expand into cislunar space (the region between Earth and the Moon) and toward Mars. On Earth, time systems rely on atomic clocks and satellites, which stay closely synchronized for navigation and communication. The study is based on Albert Einstein’s theory of relativity, which shows that time is affected by gravity and motion. Stronger gravity makes clocks run slower, while weaker gravity makes them run faster. “The time is just right for the Moon and Mars,” said NIST physicist Bijunath Patla. “This is the closest we have been to realizing the science fiction vision of expanding across the solar system.” A day on Mars is about 40 minutes longer than on Earth, and a Martian year lasts 687 Earth days. But the main question is not just about days and years, but how fast time itself passes. An atomic clock placed on Mars would function normally, but compared with one on Earth, the two would slowly drift apart due to differences in gravity and motion. This requires careful calculation of what is similar to a time-zone difference across planets. Researchers modeled Mars using a reference surface and included gravitational effects from the Sun, Earth, the Moon, and other planets. This includes a multi-body gravitational system (often described as a three-body or four-body problem, where predicting motion becomes difficult because multiple large objects all pull on each other at the same time through gravity). Mars also follows a Keplerian orbit (an idealized elliptical orbit based on simple gravitational laws that assume smooth motion, before adding real-world disturbances from other bodies). In addition, the researchers accounted for solar tides (small changes in gravitational force caused by the Sun that slightly distort planetary motion and timing, especially in systems involving Earth and the Moon). These combined effects are described as relativistic proper-time offsets (small but measurable differences in elapsed time between locations caused by gravity and motion), which must be included when comparing clocks across planets. “But for Mars, that’s not the case. Its distance from the Sun and its eccentric orbit make the variations in time larger. A three-body problem is extremely complicated. Now we’re dealing with four: the Sun, Earth, the Moon and Mars,” Patla explained. “The heavy lifting was more challenging than I initially thought.” Although the differences are extremely small, they matter for navigation and communication systems that depend on precise timing. Even modern networks on Earth, such as mobile systems, rely on timing accuracy at very small fractions of a second. Communication between Earth and Mars currently takes about four to 24 minutes or more depending on planetary positions, meaning signals are not real-time. A shared and accurate time system could help future missions reduce confusion in navigation and data exchange. “If you get synchronization, it will be almost like real-time communication without any loss of information. You don’t have to wait to see what happens,” Patla said. Researchers note that fully developed interplanetary communication networks are still far in the future. However, understanding how time behaves across planets helps prepare for those systems. “It may be decades before the surface of Mars is covered by the tracks of wandering rovers, but it is useful now to study the issues involved in establishing navigation systems on other planets and moons,” said Neil Ashby. “Like current global navigation systems like GPS, these systems will depend on accurate clocks, and the effects on clock rates can be analyzed with the help of Einstein’s general theory of relativity.” Patla added that the results also help improve understanding of time itself under relativity. “It's good to know for the first time what is happening on Mars timewise. Nobody knew that before. It improves our knowledge of the theory itself, the theory of how clocks tick and relativity,” he said. Source: NIST, IOPscience This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • TeraCopy 4.0 Build 26 by Razvan Serea TeraCopy is a compact program designed to copy and move files at the maximum possible speed, also providing you with a lot of features. Copy files faster. TeraCopy uses dynamically adjusted buffers to reduce seek times. Asynchronous copy speeds up file transfer between two physical hard drives. Pause and resume transfers. Pause copy process at any time to free up system resources and continue with a single click. Error recovery. In case of copy error, TeraCopy will try several times and in the worse case just skips the file, not terminating the entire transfer. Interactive file list. TeraCopy shows failed file transfers and lets you fix the problem and recopy only problem files. Shell integration. TeraCopy can completely replace Explorer copy and move functions, allowing you work with files as usual. TeraCopy is free for non-commercial use only. For commercial use you need to buy a license. The paid version of the program includes the following features: Copy/move to your favorite folders. Save reports as HTML and CSV files. Select files with the same extension/folder. Remove the selected files from the copy queue. TeraCopy 4.0 Build 26 changelog: Added support for receiving files via the LocalSend protocol. Improved exception handling and automated bug report upload. Fixed several minor bugs and small memory leaks. Build 26 (June 24) Fixed a rare exception when a transfer completed. Features added since version 3.17: Enhanced speed graph. New multi-threaded copy engine. Support for copying to multiple targets. Queue system for managing multiple copy operations. Support for receiving files via the LocalSend protocol. TeraCopy entry in the modern Windows Explorer context menu. Integrated toolbar in the title bar. Why receive LocalSend transfers with TeraCopy? Handle file conflicts: Skip, overwrite, or rename files when a file with the same name already exists. LocalSend always creates another copy, which can waste time and disk space, especially when resuming an interrupted transfer. Filter unwanted files: Apply ignore lists or remove files manually before accepting a transfer, so unnecessary files are not downloaded. Better performance on fast networks: In tests over a 10 Gbps connection, TeraCopy received files several times faster than the standard LocalSend app on Windows. Download: TeraCopy 4.0 Build 26 | 14.5 MB (Freeware, paid upgrade available) View: TeraCopy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Briefly used Turbo Pascal (and Turbo C++) in 97 and soon after that I bought PC magazine that included a full version of Delphi 2. I still use Delphi today, some 29 years later.
    • Age of Empires Mobile comes to PC, here's how to carry over progress from your phone by Ivan Jenic Image: YouTube/Microsoft Microsoft just released Age of Empires Mobile for PC. The game, officially called Age of Empires Mobile: PC Edition, is available for free on Steam and Microsoft Store, almost two years after its initial release for handheld devices. Age of Empires is one of those franchises that entire generations grew up with. The original came out in 1997, and immediately got people hooked to building civilizations and crushing their enemies on the battlefield. However, the franchise today is a far cry from its roots, as Age of Empires Mobile is, well, a game optimized for handheld devices, and not a classic RTS title we’ve all loved for years. And, of course, it includes in-game purchases. The PC version is still a mobile game at its core, but it’s been optimized for desktop play. There’s mouse control, full keyboard compatibility, and a refined UI. Microsoft also refreshed the visuals with some 4k textures, so the game should look better on larger screens. The game supports Crossplay, so you can switch between your phone, tablet, and PC without losing anything. But linked progress doesn’t come out of the box, as you have to enable it first. Here’s how to link your progress: On your mobile device, open Age of Empires Mobile. Go to Settings (Gear icon) > Account. Select Bind Account and choose a sign-in option. Once you enable account binding, sign in on PC using the same method, and your progress will be accessible across all your devices. Xbox Game Pass subscribers also get a bonus reward pack on PC, which includes: 1 Monthly Pass Token 1 Custom Resource Chest 10 Universal 60-Minute Speed-Ups 1,000 Empire Coins Exclusive Player Portrait Frame You can find more info about Age of Empires Mobile: PC Edition, as well as download links, on the Age of Empires official website.
  • Recent Achievements

    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
    • Rookie
      +ChiefOfNeo went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      124
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!