Recommended Posts

Ok I have a Linksys Router (NOT WIRELESS) and share xbox and 3 pc's on it I want to put 2 pcs in diff rooms and wanted to know would I need to buy a wireless router or!!! could I buy two of these

Blitzz Netwave Point Point USB 802.11b 11Mbps Wireless LAN USB Adaptor, Model# BWU603

Specifications:

Data Rate: 11, 5.5, 2, 1Mbps auto adaptive

Coverage Area: Indoor (50M @ 11Mbps) Outdoor (150M @ 11Mbps)

Roaming: 802.11 compliant

Security: 64-bit and 128-bit WEP Encryption

Wireless Interface:

Port: Wireless antenna

Interface: IEEE 802.11b

Antenna: 2 Omni antenna

Frequency: 2.412~2.462 GHz

Operating Channels: 11 channels

Network Interface:

Interface: USB 1.1

Connector: Mini type USB connector

33-132-001-01.jpg

33-132-001-03.jpg

Put one in my comp. to get net and put the other one in another comp and get net from the one I have on my computer will that work?

Please HELP!

Link to comment
https://www.neowin.net/forum/topic/74530-wireless-networking/
Share on other sites

Sorry to mention a mac here, but I know in OS X you can network two computers via just access points by enabling internet sharing and selecting the internet source and access point for broadcasting so im pretty sure you should be able to in Windows XP, don't know about anything below it though. If it's not built-in to the OS there should be a freeware or cheap app that would allow you to configure it this way. I'd say just get the two from a place that allows returns and if they don't work, send em back. Just remember, you'll have to keep the main PC on all the time otherwise the other two won't have net access.

  brn2prgrm said:
Sorry to mention a mac here, but I know in OS X you can network two computers via just access points by enabling internet sharing and selecting the internet source and access point for broadcasting so im pretty sure you should be able to in Windows XP, don't know about anything below it though. If it's not built-in to the OS there should be a freeware or cheap app that would allow you to configure it this way. I'd say just get the two from a place that allows returns and if they don't work, send em back. Just remember, you'll have to keep the main PC on all the time otherwise the other two won't have net access.

yea i think if i you use ics you can bridge together to wireless cards together but u said u want to computer u might run into a problem.

*only is you go the ICS route*Since u said u had a linksys router make sure you go in and chaneg the default lan ip to be 192.168.0.1 and not 192.168.1.1

There is a SIMPLE RULE OF THUMB ABOUT WIRELESS

YOU NEED AT LEAST TWO WIRELESS TO DEVICES TO GET WIRELESS!!

If you have a router, w/o a wap and just a USB Wireless Adapter, you get poop OK.

You still Need the WAP for the router.

You to have something to send and recieve the wireless signal.

The Entire Wireless Router's are cheaper than just bying the add on Ethernet WAP.

Linksys BEFW11S4 version 2 or 3. will do the job.

When building my Wireless network I have found out two things. One of which is about Blitzz.

Blittz makes a great Mobile card, but their other equipment with the PCI Wireless card being especially noted; because it looses signal often, even if it's within close open proximity of the wireless router.

I would use a different brand, namely Linksys or Netgear. These two brands are excellent quality at reasonable prices. If you were to pay 10 - 20 bucks more (on average) to get the above mentioned, it would be worth it to you for 3 reasons.

1. Quality + Wi-Fi certified + Docs

2. WEP Encryption can Generate HEX (this comes in really handy)

3. Software is better and updated more frequently with support to boot

If you have a wired hub and want to share with a wireless device, you have a couple of options.

Get a Wireless Router and a Wireless Device (USB, PCI, Mobile; they are usally within the same price range)

Get a Wireless Device and another Wireless Device

Probably the easiest to setup and deploy are the USB Wireless, if you choose this option, go with the linksys because they seem to be more up-to-date on the firmware and drivers than Netgear is (only marginally so)

You would run these two devices on Ad-Hoc to have them talk to each other, and then everything else included with getting the internet piped through the wireless is post mortem :happy:

If you have Windows XP bridging the two devices it won't work the way you want it to, so you would use the ICS, which is available on all versions of windows since 98 SE. Since ICS throws an IP to a connecting device that listens for DHCP, it will seamless connect to a Mac regardless, if you are using a windows machine as a gateway.

Edit: The only other thing I can think of regarding this, is, that sometime you would need to manually enter in the gateway IP for it to acquire the DHCP information.

If you are using a Mac as a Gateway, I'm sure there is a similiar configuration for Internet sharing, I'm 80% sure Mac OS.X will have this. Both should be easy to setup.

you can watch your local best buy or circuit city, open box buys come with the same warranty as a new part, only difference is, it left the store for some reason. both my router and my sony video cam i got open box buy, i saved 100+ on the router and 400 on the camera. depending on if its best buy or cicuit city, you can save more than listed...for instance, CC wanted 1200 for a new camera, there was an open box for 1050, the sales girl told me shed give it to me for 1000, i said 750, she said 850, i said 800 and stated that i could get a new one for that via the web...i got it for 800 and away i went, she gets her commission back on the returned item and i get a cheap camera. linksys and d-link are notorious for mail in rebates...just keep watching and you'll score one for at least 40% off.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • RoboForm 9.7.7 by Razvan Serea RoboForm is the top-rated Password Manager and Web Form Filler that completely automates password entering and form filling. RoboForm makes logging into Web sites and filling forms faster, easier, and more secure. RoboForm memorizes and securely stores each user name and password the first time you log into a site, then automatically supplies them when you return. RoboForm's powerful Logins feature eliminates the manual steps of logging into any online account. With just one click RoboForm will navigate to a Web site, enter your username and password and click the submit button for you. Completing long registration or checkout forms is also a breeze. Simply click on your RoboForm Identity and RoboForm fills-in the entire form for you. You no longer need to remember all your passwords. You remember one Master Password, and RoboForm remembers the rest. This allows you to use stronger passwords, making your online experience more secure. RoboForm uses strong AES encryption for complete data security. The all new RoboForm comes with Chrome and Safari browser support, iPhone/iPad and Android support, as well a brand new RoboForm Everywhere license for use on unlimited computers and mobile devices. RoboForm 9.7.7 changelog: Show RF Desktop unlock UI when user selects "Unlock" in RF Desktop UI. Fixed blank icon appeared in the Windows taskbar for RF Editor. Miscellaneous bug fixes. Download: RoboForm 9.7.7 | 42.2 MB (Free, paid upgrade available) View: RoboForm Website Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • LG G5 was the last memorable phone I had. The Samsung and Pixels and have had since have been disappointing and boring.
    • Isn't the CPU used to calculate the parity for the RAID? If so, the combination of SSDs and 10GBe might make the CPU more important
    • yeah GSMA began working to enable end to end encryption between android and iphone last year and apparently a new standard was developed. apple has said that they would implement this in "future software updates" but i haven't heard anything since march, the time this was all reported on. shortly after, i read on forbes that the FBI suggests not sending texts between iphone and android because they're unencrypted. i use signal to chat with my wife but i'd rather just use messages tbh (she has an iphone), i'm not really a 3rd party guy haha
    • Well, I did not like the trailer for the project he went to work on also, but why do you think he should waste time with this… did you love the season 2? Maybe I am missing out after the crap I saw in first season ep1-3? I love the first last of us game… while not the BEST it was one of the games that I will remember for the EXPERIENCE it game me… last of us 2 was not on the same level at all and the show🤔 complete miss in my experience of the first few level
  • Recent Achievements

    • Reacting Well
      SteveJaye earned a badge
      Reacting Well
    • One Month Later
      MadMung0 earned a badge
      One Month Later
    • One Month Later
      Uranus_enjoyer earned a badge
      One Month Later
    • Week One Done
      Philsl earned a badge
      Week One Done
    • Week One Done
      Jaclidio hoy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      431
    2. 2
      ATLien_0
      156
    3. 3
      +FloatingFatMan
      149
    4. 4
      Nick H.
      64
    5. 5
      +thexfile
      62
  • Tell a friend

    Love Neowin? Tell a friend!