Recommended Posts

Ok I have a Linksys Router (NOT WIRELESS) and share xbox and 3 pc's on it I want to put 2 pcs in diff rooms and wanted to know would I need to buy a wireless router or!!! could I buy two of these

Blitzz Netwave Point Point USB 802.11b 11Mbps Wireless LAN USB Adaptor, Model# BWU603

Specifications:

Data Rate: 11, 5.5, 2, 1Mbps auto adaptive

Coverage Area: Indoor (50M @ 11Mbps) Outdoor (150M @ 11Mbps)

Roaming: 802.11 compliant

Security: 64-bit and 128-bit WEP Encryption

Wireless Interface:

Port: Wireless antenna

Interface: IEEE 802.11b

Antenna: 2 Omni antenna

Frequency: 2.412~2.462 GHz

Operating Channels: 11 channels

Network Interface:

Interface: USB 1.1

Connector: Mini type USB connector

33-132-001-01.jpg

33-132-001-03.jpg

Put one in my comp. to get net and put the other one in another comp and get net from the one I have on my computer will that work?

Please HELP!

Link to comment
https://www.neowin.net/forum/topic/74530-wireless-networking/
Share on other sites

Sorry to mention a mac here, but I know in OS X you can network two computers via just access points by enabling internet sharing and selecting the internet source and access point for broadcasting so im pretty sure you should be able to in Windows XP, don't know about anything below it though. If it's not built-in to the OS there should be a freeware or cheap app that would allow you to configure it this way. I'd say just get the two from a place that allows returns and if they don't work, send em back. Just remember, you'll have to keep the main PC on all the time otherwise the other two won't have net access.

  brn2prgrm said:
Sorry to mention a mac here, but I know in OS X you can network two computers via just access points by enabling internet sharing and selecting the internet source and access point for broadcasting so im pretty sure you should be able to in Windows XP, don't know about anything below it though. If it's not built-in to the OS there should be a freeware or cheap app that would allow you to configure it this way. I'd say just get the two from a place that allows returns and if they don't work, send em back. Just remember, you'll have to keep the main PC on all the time otherwise the other two won't have net access.

yea i think if i you use ics you can bridge together to wireless cards together but u said u want to computer u might run into a problem.

*only is you go the ICS route*Since u said u had a linksys router make sure you go in and chaneg the default lan ip to be 192.168.0.1 and not 192.168.1.1

There is a SIMPLE RULE OF THUMB ABOUT WIRELESS

YOU NEED AT LEAST TWO WIRELESS TO DEVICES TO GET WIRELESS!!

If you have a router, w/o a wap and just a USB Wireless Adapter, you get poop OK.

You still Need the WAP for the router.

You to have something to send and recieve the wireless signal.

The Entire Wireless Router's are cheaper than just bying the add on Ethernet WAP.

Linksys BEFW11S4 version 2 or 3. will do the job.

When building my Wireless network I have found out two things. One of which is about Blitzz.

Blittz makes a great Mobile card, but their other equipment with the PCI Wireless card being especially noted; because it looses signal often, even if it's within close open proximity of the wireless router.

I would use a different brand, namely Linksys or Netgear. These two brands are excellent quality at reasonable prices. If you were to pay 10 - 20 bucks more (on average) to get the above mentioned, it would be worth it to you for 3 reasons.

1. Quality + Wi-Fi certified + Docs

2. WEP Encryption can Generate HEX (this comes in really handy)

3. Software is better and updated more frequently with support to boot

If you have a wired hub and want to share with a wireless device, you have a couple of options.

Get a Wireless Router and a Wireless Device (USB, PCI, Mobile; they are usally within the same price range)

Get a Wireless Device and another Wireless Device

Probably the easiest to setup and deploy are the USB Wireless, if you choose this option, go with the linksys because they seem to be more up-to-date on the firmware and drivers than Netgear is (only marginally so)

You would run these two devices on Ad-Hoc to have them talk to each other, and then everything else included with getting the internet piped through the wireless is post mortem :happy:

If you have Windows XP bridging the two devices it won't work the way you want it to, so you would use the ICS, which is available on all versions of windows since 98 SE. Since ICS throws an IP to a connecting device that listens for DHCP, it will seamless connect to a Mac regardless, if you are using a windows machine as a gateway.

Edit: The only other thing I can think of regarding this, is, that sometime you would need to manually enter in the gateway IP for it to acquire the DHCP information.

If you are using a Mac as a Gateway, I'm sure there is a similiar configuration for Internet sharing, I'm 80% sure Mac OS.X will have this. Both should be easy to setup.

you can watch your local best buy or circuit city, open box buys come with the same warranty as a new part, only difference is, it left the store for some reason. both my router and my sony video cam i got open box buy, i saved 100+ on the router and 400 on the camera. depending on if its best buy or cicuit city, you can save more than listed...for instance, CC wanted 1200 for a new camera, there was an open box for 1050, the sales girl told me shed give it to me for 1000, i said 750, she said 850, i said 800 and stated that i could get a new one for that via the web...i got it for 800 and away i went, she gets her commission back on the returned item and i get a cheap camera. linksys and d-link are notorious for mail in rebates...just keep watching and you'll score one for at least 40% off.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • If narwhal is the identification, aren't the elephants dumb?
    • You do realize that if you are using Full Self Driving that you aren't actually driving, right?
    • I see several on eBay. Am I blind, or is this something else? Link (I know this link isn't in UK, but an example)
    • When my Tab S9 FE tablets were upgraded to Android 15 and Samsung UI 7.0 there were some default systems changes. One of them was. when I wanted to Power Down the tablet and tapped the Power button, Gemini popped up and I had to say Power Off which then brought up the Power Off menu resulting in an extra step in powering down the tablet. After some sleuthing I found that I could turn off Gemini and go back to the old menu, so I did. Maybe one day I will be comfortable talking to a machine but that day is not today.
    • Rufus 4.8.2253 by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.8.2253 changelog: Switch to wimlib for all WIM image processing: Greatly speeds up image analysis when opening Windows ISOs Can speed up Windows To Go drive creation (But won't do miracles if you have a crap drive) Might help with Parallels limitations on Mac (But Rufus on Parallels is still unsupported) Enables the splitting of >4GB files with Alt-E (But still WAY SLOWER than using UEFI:NTFS) Others Switch to using Visual Studio binaries everywhere, due to MinGW DLL delay-loading limitations Add more exceptions for Linux ISOs that restrict themselves to DD mode (Nobara, openSUSE, ...) Improve reporting of UEFI bootloaders in the log, with info on the Secure Boot status Fix an issue with size limitations when writing an uncompressed VHD back to the same drive Fix a crash when opening the log with the 32-bit MinGW compiled version Fix commandline parameters not being forwarded to original Windows setup.exe Download: Rufus 4.8 | Portable | ~2.0 MB (Open Source) Download: Rufus 32-bit | ARM64 Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Posting Machine
      David Uzondu earned a badge
      Posting Machine
    • One Month Later
      Stokenking earned a badge
      One Month Later
    • One Month Later
      Kevin Jones earned a badge
      One Month Later
    • Week One Done
      Kevin Jones earned a badge
      Week One Done
    • One Month Later
      henryj earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      530
    2. 2
      ATLien_0
      267
    3. 3
      +Edouard
      198
    4. 4
      +FloatingFatMan
      189
    5. 5
      snowy owl
      138
  • Tell a friend

    Love Neowin? Tell a friend!