Speakers are ALWAYS the weakest link


Recommended Posts

So we leave the store out of it; you buy 1 set of speakers and 2 receivers. You take them home. You listen to them both, using shakey's ABX method. Are we still saying that, using 2 receivers from 2 different makers, no difference can possibly be heard by the EAR? Not possible? No matter the source?

Now, you could say that my setup is flawed; 2 different receivers from 2 different manufacturers would most likely have dissimilar specs. Yes, they could, and most likely do, no matter what's written on their spec sheet. Many makers lie or cheat on their spec sheets, or are just plain wrong, or measured using a different criteria and used those numbers on their product page. Given all that, using the same pair of speakers, you're saying they can't possibly sound different?

Audio is a verifiable field of study.

Do you equate engineering to musical sound?

I didn't say it wasn't about what sounds good, I said I'm not defining what good is. I'm saying it's incredibly stupid to make a post about how speakers are the only thing that matters to this good sound, and that everything else is secondary.
Why is that incredibly stupid when you refuse to even say what "good sound" is? You're arguing something that is not falsifiable. If I were to define "good sound" as the part of sound solely affected by speakers, your claim becomes instantly false.
Why is that incredibly stupid when you refuse to even say what "good sound" is? You're arguing something that is not falsifiable. If I were to define "good sound" as the part of sound solely affected by speakers, your claim becomes instantly false.

"Good sound" is subjective. "Good sound" is what sounds good to YOU. If you're looking for absolutes in sound, you're wasting your time. Would you prefer I use a new term that would still show that painting the speaker as the only point to be careful with in choosing your equipment is still stupid?

However, I didn't say "good sound" once in my last post. Do you have any responses to my questions that would back up your point, or do you insist on repeating the same thing over and over in the hopes it looks intelligent?

Edited by Joel
1) shakey_shake got into trouble by using absolutes. Specifically the statement "See, the weakest link in any audio reproduction chain is always the last one: the speakers."

So should I jump on Joel for using absolutes?:

The speakers are not the weakest link in this chain.
I could, but I wouldn't do it because I was more interested in helping the OP than trolling.
I cannot imaging that my iPod shuffle with a 64kbps MP3 when connected to $2000 speakers would still have the speakers as the weakest link in the chain.
Two problems with your example:

1) The audio source is not part of the sound reproduction chain. It is the end result of the recording process. Obviously, if you're listening to AM radio things are going to sound different than if you're listening to a CD.

2) An iPod shuffle doesn't have line level output. So you wouldn't want to plug it into anything that could power some speakers anyways. But even if you could, the DAC in even an iPod shuffle should be transparent. Now I've read some nasty things about the DAC in the 2nd gen shuffle (the square-ish one), but I've never seen anyone run an ABX test to back those claims up.

Regardless, portable media players and headphones are well outside the scope in which I made my original claim about home theater/stereo receivers and speakers. I'm sure there are cheap PMPs with terrible DACs somewhere in China that are ABX'able. The point is that it is necessary to remain skeptical of quality claims until they are proven via conclusive ABX results.

Now that my be an exaggeration but such an absolute statement invites people to think of examples where the speakers are not actually the problem.
I cannot think of any time barraging someone as such wouldn't be considered trolling, even when Joel does it. :pinch:
So we leave the store out of it; you buy 1 set of speakers and 2 receivers. You take them home. You listen to them both, using shakey's ABX method. Are we still saying that, using 2 receivers from 2 different makers, no difference can possibly be heard by the EAR? Not possible? No matter the source?

Now, you could say that my setup is flawed; 2 different receivers from 2 different manufacturers would most likely have dissimilar specs. Yes, they could, and most likely do, no matter what's written on their spec sheet. Many makers lie or cheat on their spec sheets, or are just plain wrong, or measured using a different criteria and used those numbers on their product page. Given all that, using the same pair of speakers, you're saying they can't possibly sound different?

With volume levels matched and the test being preformed double-blind, I'd say you basically have it. We have to assume, of course that the various components are compatible. Above I've given some criteria of things that we can rule out:
and has the power to drive whatever speakers you buy to a sufficient volume.

This would include impedance problems, and listening at volumes that would result in one amp clipping.

or the amplifier is purposely adding distortion (as is the purpose of tube amplifiers, or EQing)

There's other things you could do as well to sabotage your results, obvious. Set one receiver to stereo and the other to mono and the differences will be pretty obvious with a stereo source. For me to blindly accept results you come up with requires an amount of good faith with the process on your part. Although if you're really convinced you can hear the differences between the internal parts of two receivers, I don't know why you wouldn't want to try to prove that.

I'm probably forgetting something else at the moment. Here's a fairly general guide behind the process.

Do you equate engineering to musical sound?
I don't know what this is supposed to mean. On what level am I supposed to equate them, exactly? Sound is the phenomena we perceive through one of the five senses: hearing; engineering is the application of science through technology.

The relationship is that we study sound through the science of Psychoacoustics and can directly apply it's findings to technology via engineering.

"Good sound" is subjective. "Good sound" is what sounds good to YOU. If you're looking for absolutes in sound, you're wasting your time.
Aren't you saying this absolutely? :whistle: Edited by shakey_snake
1) The audio source is not part of the sound reproduction chain.

Um, what? I'm pretty sure without it, you'd need another source. The chain doesn't start in the middle.

I cannot think of any time barraging someone as such wouldn't be considered trolling, even when Joel does it. :pinch:

Telling you you're wrong is not a barrage.

With volume levels matched and the test being preformed double-blind, I'd say you basically have it.

Wow.

Um, what? I'm pretty sure without it, you'd need another source. The chain doesn't start in the middle.
The goal of an "audio reproduction chain" is to honor the source material as closely as possible. This is called transparency.

A receiver that plays back a 64kbps MP3 should make it sound as much like a 64kbps mp3 as possible.

It's not the playback systems fault that sound quality is crippled by the poor source material.

This is an interesting discussion I must say ..

I come from an analog audiophile background so I grew up with the notion of the audio source was king! Of course, back then that meant the latest vinyl Lp's played by Linn Sondek turntables, Ittok arms and Naim amps (if you were lucky enough to afford such luxuries) .. the speaker setup was important of course, but not as much as the source!

If at the end of hours of tweaking it all sounded good then that was it .. there was no measuring involved, the sound was all important!

Now it's the digital age and everythings different ... worse? .. possibly, possibly not.

I don't think its worth arguing about though.

  • 2 weeks later...

I recently found this quote by J. Gordon Holt, the founder of Stereophile magazine.

For those who don't know, Stereophile is the flagship soft-serve review magazine that makes all sorts of ridiculous claims regarding things like $10,000 RCA cables, while dousing nearly every review with pseudo-science and biased conclusions drawn from sighted listening tests.

So, I found it very interesting as to what their founder had to say:

Do you see any signs of future vitality in high-end audio?

Vitality? Don't make me laugh. Audio as a hobby is dying, largely by its own hand. As far as the real world is concerned, high-end audio lost its credibility during the 1980s, when it flatly refused to submit to the kind of basic honesty controls (double-blind testing, for example) that had legitimized every other serious scientific endeavor since Pascal. [This refusal] is a source of endless derisive amusement among rational people and of perpetual embarrassment for me, because I am associated by so many people with the mess my disciples made of spreading my gospel. For the record: I never, ever claimed that measurements don't matter. What I said (and very often, at that) was, they don't always tell the whole story. Not quite the same thing.

Remember those loudspeaker shoot-outs we used to have during our annual writer gatherings in Santa Fe? The frequent occasions when various reviewers would repeatedly choose the same loudspeaker as their favorite (or least-favorite) model? That was all the proof needed that [blind] testing does work, aside from the fact that it's (still) the only honest kind. It also suggested that simple ear training, with DBT confirmation, could have built the kind of listening confidence among talented reviewers that might have made a world of difference in the outcome of high-end audio.

You can read the whole interview here, although the above quote is really the only part relevant to this thread.

For the record: I never, ever claimed that measurements don't matter. What I said (and very often, at that) was, they don't always tell the whole story. Not quite the same thing.

Do you agree with this? Because you said before that the rest of the equipment didn't matter, just the speakers.

That quote you've extracted is incredibly ambiguous and I'm not sure exactly what he means by it. However, the part I've bolded is clear: guys like you who have been "been doing this since before I was in kindergarten" are digging your own graves.

And to clarify my position, I've only said that speakers are going to be your only difference in matters of sound quality claims.

But as far as consumer commodities (and he's making this claim in an overarching "audio industry" context), maybe a "unibody" macbook is worth the extra $400 to someone. Maybe a wooden volume knob provides a tactile or aesthetic quality someone with too much money would enjoy for an extra $485.

But you can't blindly make (or believe) sound quality claims.

Edited by shakey_snake

Earlier I was saying that some amps have a 1% Total Harmonic Distortion while better amps have a 0.1% THD. That was the reason why I selected a Yamaha amp rather than a Panasonic one. I'm bringing this up again because I remembered what the measurement was called (and I linked it to wikipedia).

Now, my amp was still relatively cheap (compared to what true audiophiles would purchase) and perhaps you can't hear the difference between 1% and 0.1% but it suggests to me that speakers are not the ONLY thing that matters. I am prepared to accept that they may very well be the most important piece of the puzzle but not that they are the only thing that matters.

That quote you've extracted is incredibly ambiguous and I'm not sure exactly what he means by it. However, the part I've bolded is clear: guys like you who have been "been doing this since before I was in kindergarten" are digging your own graves.

He means that measurements are not the be-all and end-all that you're saying. So in essence, you posted an article to make your point where the author refuted what you've been saying. Of course different equipment can sound different than other equipment with similar specs. Saying that speakers are all that can make a difference is just silly.

People did double-blind test all the time, and with more than speakers.

Would you prefer I use a new term that would still show that painting the speaker as the only point to be careful with in choosing your equipment is still stupid?
You're completely missing the point. Not surprising, as you've been continuing to miss it all along.

Here is your argument, in point form, as I understand it:

  • Good sound is assessed by listening.
  • What makes sound good is completely subjective. That is, good is specific to a listener.

This argument implies the following:

  • Any method of choosing equipment that results in good sound to a listener is a valid method.
  • Therefore, making any claims about a method of choosing equipment is completely useless.

The first two points are totally nonsense. They directly imply the rest. If I am misrepresenting your argument, feel free to point out my error.

He means that measurements are not the be-all and end-all that you're saying.
Of what: sound quality or consumerism?

If he means the former than he has directly contradicted what he says in the beginning of the paragraph. So why is that the logical conclusion you make?

Because it is very obvious to anyone reading this thread that at this point you are simply grasping at straws.

Of course different equipment can sound different than other equipment with similar specs. Saying that speakers are all that can make a difference is just silly.
You have yet to sight proper double-blind study which proves what you are saying. Until then:
unless you decide to take my challenge it's going to be a pretty pointless conversation.
People did double-blind test all the time, and with more than speakers.
And what are the results? You have results which are in your favor? No, you don't. Edited by shakey_snake
I cannot imaging that my iPod shuffle with a 64kbps MP3 when connected to $2000 speakers would still have the speakers as the weakest link in the chain. Now that my be an exaggeration but such an absolute statement invites people to think of examples where the speakers are not actually the problem.

That is just a horrible example. This thread is talking about the audio setup, not the quality of the source media. Take the same ipod, but load a lossless audio file on it, and the speakers easily become the weakest link.

...and for everyone arguing about sound appeal being subjective, of course it is, that is why you have all sorts of different bands making different kinds of sounds (music). Personally I would rather leave the subjective taste to the artist, and use an objective method to reproduce their work. To do that you need an objective, HI-FI, audio system that will accurately reproduce the artists' subjective work. People who like to apply a subjective standard to their audio are basically people who think they can tweak the sound better than the original artist can. It is a matter of taste, but personally I would rather have as accurate of a reproduction as possible.

That is just a horrible example. This thread is talking about the audio setup, not the quality of the source media. Take the same ipod, but load a lossless audio file on it, and the speakers easily become the weakest link.

...and for everyone arguing about sound appeal being subjective, of course it is, that is why you have all sorts of different bands making different kinds of sounds (music). Personally I would rather leave the subjective taste to the artist, and use an objective method to reproduce their work. To do that you need an objective, HI-FI, audio system that will accurately reproduce the artists' subjective work. People who like to apply a subjective standard to their audio are basically people who think they can tweak the sound better than the original artist can. It is a matter of taste, but personally I would rather have as accurate of a reproduction as possible.

I still don't see how a $50 device is expected to match a $2000 amplifier in audio quality given that they both are connected to $2000 speakers. Is it the contention of everyone here that people who buy anything other than the cheapest amp possible are only interested in fashion and ergonomics?

I still don't see how a $50 device is expected to match a $2000 amplifier in audio quality given that they both are connected to $2000 speakers. Is it the contention of everyone here that people who buy anything other than the cheapest amp possible are only interested in fashion and ergonomics?

I think you would still need an amplifier, I don't think there are many $2000 speakers that an ipod can power. The point is once you have ipod > amp > speakers, the speakers are still going to be the weakest link. As long as the amp has appropriate specs to power the speakers, it's not going to make much difference if you swap it out with a better brand or more expensive model. In most cases you will just get extra features, not better audio.

While I fully comprehend that it is wiser to purchase $2000 speakers and a $100 amplifier rather than to spend $2000 on an amplifier just to pair it with $100 speakers. Such logic should be a given to anyone.

I would be surprised, however, to find out that there was no audio quality difference between your average $100 amplifier and your average $2000 one. I expect that more distortion would tend to be present in cheaper models.

I think you can spend a lot in speakers before other elements in the setup start to really matter. Of course, 64kbps mp3 is horrible, but (1) buying decent records isn't a huge investement, and (2) they're not really part of the setup, the setup being what plays the music, not the musical material itself.

In terms of where the money should go for a good quality setup, it's probably 90% in the speakers.

I got myself some Audioengines 2.0 and they absolutely rock my world, btw. The acoustics of my room prohibited the use of a subwoofer, and I didn't feel like spending anything on an amplifier, so these fitted the bill perfectly. Highly recommended ! My friend bought them too and is just as delighted.

I would be surprised, however, to find out that there was no audio quality difference between your average $100 amplifier and your average $2000 one. I expect that more distortion would tend to be present in cheaper models.

Of course. This is where shakey's argument that speakers were all that mattered became ridiculous.

Is it the contention of everyone here that people who buy anything other than the cheapest amp possible are only interested in fashion and ergonomics?
All features, power, and reliability being equal, yes.
I would be surprised, however, to find out that there was no audio quality difference between your average $100 amplifier and your average $2000 one. I expect that more distortion would tend to be present in cheaper models.
Well, I can promise you that you wouldn't be the first person surprised with the results of blind testing.

It's just a matter of setting your ego aside.

It's obvious at this point that that is something that Joel just will not do, but there's no reason to ride in that sinking ship with him.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Rockstar gives last-gen GTA V players free upgrades tomorrow by Pulasthi Ariyasinghe Rockstar is preparing to launch Grand Theft Auto VI later this year, but ahead of that, the company has revealed a new offer for some Grand Theft Auto V owners. It today announced that Xbox One and PlayStation 4 version owners of the 2013-released title will soon be receiving a free upgrade to the current generation version. The studio released the Xbox Series X|S and PlayStation 5 version of Grand Theft Auto V back in 2022, bringing significant upgrades to the original console editions. This included 60 FPS gameplay at up to 4K resolution, as well as major upgrades to textures, draw distance, and audio. Faster load times, ray tracing elements, and HDR support were also added with it. While this new and enhanced version needed a new purchase of the game to jump in, now Rockstar has decided to make it a free upgrade, dropping the $40 price tag entirely on consoles. "Beginning tomorrow, those who own any PS4 version or the digital Xbox One version of Grand Theft Auto V will be able to upgrade to the PS5 or Xbox Series X|S versions at no additional cost, and experience the best versions of GTA V and GTA Online," said the company in an official blog post. The free upgrade offer will be released tomorrow, June 18, for all Xbox One and PlayStation 4 owners of Grand Theft Auto V. Players who will be jumping in on the offer will want to check how to migrate their GTA Online profile from last-generation to current-generation consoles by heading over here. The offer lands ahead of The Kortz Center Heist hitting Grand Theft Auto Online, where players and crews will be tasked with stealing priceless international art from a prestigious gallery in Pacific Bluffs. It doesn't look like Rockstar plans to stop updating its previous game even with Grand Theft Auto VI being on the horizon. The latest title is slated to launch on November 19, 2026, across Xbox Series X|S and PlayStation 5.
    • Now comes with a money back guarantee instead of a replacement! Hah
    • Rufus 4.15.2391 Beta by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2391 Beta changelog: Improve the guards for using the "silent" option Improve the ability to cancel during write retries Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Media Player Classic - Home Cinema 2.7.3 by Razvan Serea Media Player Classic - Home Cinema (MPC-HC) is a free and open-source video and audio player for Windows. MPC-HC is based on the original Guliverkli project (which is no longer maintained) and contains many additional features and bug fixes. As the continuation of the original Media Player Classic, MPC-HC isn’t flashy but it works with nearly any media format. MPC-HC uses DXVA technology to pass decoding operations to your modern video card, enhancing your viewing experience. And MPC-HC supports both physical and software DVDs with menus, chapter navigation, and subtitles. Overview of features A lot of people seem to be unaware of some of the awesome features that have been added to MPC-HC in the past years. Here is a list of useful options and features that everyone should know about: Dark interface Menu > View > Dark Theme When using dark theme it is also possible to change the height of the seekbar and size of the toolbar buttons. Options > Advanced Video preview on the seekbar Options > Tweaks > Show preview on seek bar Adjust playback speed Menu > Play > Playback rate The buttons in the player that control playback rate take a 2x step by default. This can be customized to smaller values (like 10%): Options > Playback > Speed step Adjusting playback speed works best with the internal audio renderer. This also has automatic pitch correction. Options > Playback > Output > Audio Renderer MPC-HC can remember playback position, so you can resume from that point later Options > Player > History You can quickly seek through a video with Ctrl + Mouse Scrollwheel. You can jump to next/previous file in a folder by pressing PageUp/PageDown. You can perform automatic actions at end of file. For example to go to next file or close player. Options > Playback > After Playback (permanent setting) Menu > Play > After Playback (for current file only) A-B repeat - You can loop a segment of a video. Press [ and ] to set start and stop markers. You can rotate/flip/mirror/stretch/zoom the video Menu > View > Pan&Scan This is also easily done with hotkeys (see below). There are lots of keyboard hotkeys and mouse actions to control the player. They can be customized as well. Options > Player > Keys Tip: there is a search box above the table. You can stream videos directly from Youtube and many other video websites You can stream videos directly from Youtube and many other video websites Put yt-dlp.exe or youtube-dl.exe in the MPC-HC installation folder. Then you can open website URLs in the player: Menu > File > Open File/URL You can even download those videos: Menu > File > Save a copy Tip: to be able to download in best quality with yt-dlp/youtube-dl, it is recommended to also put ffmpeg.exe in the MPC-HC folder. Several YDL configuration options are found here: Options > Advanced This includes an option to specify the location of the .exe in case you don't want to put it in MPC-HC folder. Play HDR video This requires using madVR or MPC Video Renderer. After installation these renderers can be selected here: Options > Playback > Output Ability to search for and download subtitles, either automatically or manually (press D): Options > Subtitles > Misc Besides all these (new) features, there have also been many bugfixes and internal improvements in the player in the past years that give better performance and stability. It also has updated internal codecs. Support was added for CUE sheets, WebVTT subtitles, etc. Media Player Classic - Home Cinema 2.7.3 changelog: Updated LAV Filters to version 0.82 Updated MPC Video Renderer to version 0.10.4.2550 Updated MPC Audio Renderer A few crash fixes, bug fixes and small improvements. Download: MPC-HC 2.7.3 (x64) | Standalone | ~20.0 MB (Open Source) Download: MPC-HC 2.7.3 (x86) | Standalone Links: MPC-HC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      89
    4. 4
      Steven P.
      76
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!