Speakers are ALWAYS the weakest link


Recommended Posts

Audio reproduction, for those that care is about establishing a solid ecosystem, where all components (source, amp, speakers etc.) compliment each other.

It isn't a matter of Speaker A being "better" than B, or amp A vs B, when different configurations will meet different requirements. For those on a tight budget, which is where this thread started, its about getting your moneys worth. For everyone else, it is about piecing together a system that works best, source material included.

Audio reproduction, for those that care is about establishing a solid ecosystem, where all components (source, amp, speakers etc.) compliment each other.

It isn't a matter of Speaker A being "better" than B, or amp A vs B, when different configurations will meet different requirements. For those on a tight budget, which is where this thread started, its about getting your moneys worth. For everyone else, it is about piecing together a system that works best, source material included.

Well said, I don't see any one piece of the chain being more important than the others. Getting bang for your buck can be challenging, and there is no such thing as inexpensive/cheap audiophile gear, but you can get rather decent quality from a nice blend of affordable gear with a little effort. Of course if you get obsessive enough then you have to start looking at room acoustics and now you are off a cliff. This seems like an argument about an argument.

i say that the the amp matters, not for you directly, but for the speakers you are using... every speaker has its 'favourite' amp, where bad characteristics cancel each other out and the good things combine to create something greater than their sum

just like there is no speaker which would sound good with every single amp out there, there is no amp which would drive every speaker beautifully... just because the amp is more expensive, doesnt mean that it will definitely work better with the speakers you have, and vice versa

but if cost truly is an issue and i have to choose what to spend on... then the speakers are primary to me, i feel better about having a capable set of speakers recreating the sound of a not-so-good amp, rather than having an expensive amp obscured by lousy speakers... it kind of gives breathing space and a better sense of the electronic domain of your setup, you could try different things like adding induction loops and bi-cabling the wires and stuff like that to mess with the sound if you dont like what's coming out of the amp

i think the problem for most of us is that we simply dont have a whole shop's worth of different amps and speakers to choose from, in our living room where we will actually be using the setup nonetheless... the acoustics of your room is likely to differ from the showroom, thats another factor

Huh? How much would you spend on the preamp/amp or receiver and a media source then? Say you got something decent for $500-600 bucks; you'd spend $4500 on the speakers?

My Yamaha amp was cheaper than that. It is a fairly basic model that offered low total harmonic distortion compared to its price competitors.

My front/main speakers are fairly nice but they are relatively huge (double base cones in each) and thus my wife hates them.

1 test with 25 people and a small number of amps is hardly conclusive....

Well, it's indicative.

You don't have to smell every steer's butt to know what bullsh*t smells like. :p

There were enough tests run that audible differences could have been determined at very statistically significant levels, yet the listeners preformed no better than random guessing. :spindj:

Edited by shakey_snake

So essentially - we should only be completely scientific when it suits us?

Taking that stance... I am not sure how that you are any different from the 'audiophile' crowd...

The sample size is small enough to potentially be a statistical anomaly...

I am personally of the belief that you take a number of factors into consideration including if you like the sound (my current amp is Onkyo TX-SR876 which retails for around ?700 in the UK at a good price) - I did audition more expensive (up to ?2000) and less expensive amps (down to ?250) and found that I liked the sound of this one best. My speakers are a set of KEF KHT3005 which retailed at around ?900 when I bought them. Now say what you want, I did the due diligence to ensure I was happy with my purchase and give the same advice to anyone who asks me - buy the one you like the sound of that falls somewhere below the maximum you want to spend...

So essentially - we should only be completely scientific when it suits us?
How do you figure that's what I'm saying?

If you for some reason think that different amps or different receivers would make a difference, than I'd certainly encourage you to do your own trials. However, without a convincing hypothesis as to why more amps or listeners would make a difference, and without having properly done more testing that has significant results to the contrary, then I have little reason to share in your skepticism at the applicability of the results of this test.

Taking that stance... I am not sure how that you are any different from the 'audiophile' crowd...

The sample size is small enough to potentially be a statistical anomaly...

The sample size is among the largest I've seen for such a test.

In fact this study is 20 years old really says something. This study really lead to a lot emotionally (as opposed to logically) driven "audiophiles" to completely reject blind testing, and ABX in particular. On what grounds? Mostly nonsense. You can find quite a bit of articles from "audio subjectivists" bashing this study online, but I have yet to see one that was even close to logically based.

Additionally, the fact that technology has exploded progressively in the last 20 years, really makes one consider: if solid-state amps were transparent 20 years ago (or even close to it) than they have to even be moreso now.

I am personally of the belief that you take a number of factors into consideration including if you like the sound (my current amp is Onkyo TX-SR876 which retails for around ?700 in the UK at a good price) - I did audition more expensive (up to ?2000) and less expensive amps (down to ?250) and found that I liked the sound of this one best. My speakers are a set of KEF KHT3005 which retailed at around ?900 when I bought them. Now say what you want, I did the due diligence to ensure I was happy with my purchase and give the same advice to anyone who asks me - buy the one you like the sound of that falls somewhere below the maximum you want to spend...

1. The price of your gear is completely irrelevant here, and I'm not sure why you've brought it up other than you feel like doing some sort of offhanded braggi;). ;)

2. How are you even certain that you "liked the sound" of any of them or could even hear a difference?

For ****s sake, I have 2 amps next to me now, I have a yahama and an onkyo 505, and the yahama is a cheap system which came with speakers as well for ?150. And the onkyo was ?200 for the amp itself. I have a pair of denon 100 watt speakers, and a pair of acoustic solution 180 watt speakers ( cba to find the model, so the watts will have to do ;P). I can tell you for a fact, that my onkyo sounds a lot better than the yahama, and it's not just me who can hear it, my room mate can, and even the cleaners at my school (im at boarding school).

My dad was a hi-fi technician, and he did spend alot on his speakers, and they sound amazing, and he was running a denon amp for 4 years, before he upgraded to the new AVC-A1XVA. And once again the new one sounds alot better, on exactly the same speakers.

Most amps do all the pre-processing, so of course there's going to be a change in quality.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • You're absolutely right! No reason in hell these should be on the road!
    • They aren't going to want to. Most would just go with the 17 Pro and save money. Why would they want to spend $300 for basically the same thing? It's not worth it if there are hardly any changes from year to year.
    • 24H2 rolled out to the Release Preview Channel in early June 2024, so this coming a bit later in the Experimental Channel (formerly Dev) doesn't really say much more than earlier H2 releases that came out in October. I am not sure what the thinking is here by putting it in Experimental, one would think that the 26H2 stamp means features are locked down and it's now bug tested until October? I don't even pretend to understand Microsoft's strategy for Windows Insider Program though
    • Nothing Ear (a) and CMF Buds Pro 2 with active noise cancellation drop to lowest price ever by Fiza Ali With Prime Day 2026 scheduled to run from Tuesday 23 to Friday 26 June, Amazon has already begun rolling out early access offers ahead of the main event. Particularly, Nothing Ear (a) and CMF Buds Pro 2 wireless earbuds have dropped to their lowest price ever with limited Prime deal offering 33% and 24% discounts, respectively. Nothing Ear (a) are equipped with 11mm dynamic drivers featuring a PM1 + TPU diaphragm. For noise control, the earbuds offer active noise cancellation (ANC) of up to 45dB across frequencies reaching 5,000Hz. The smart ANC algorithm adapts to surrounding noise levels, while a Transparency Mode allows users to remain aware of their environment when needed. Connectivity is handled via Bluetooth 5.3, with support for AAC, SBC, and LDAC audio codecs. Additional features include IP54-rated earbuds for dust and splash resistance, paired with an IPX2-rated charging case. Furthermore, users also benefit from pinch controls, in-ear detection, Google Fast Pair, Microsoft Swift Pair, dual-device connectivity, and a low-latency mode designed for gaming and video playback. The Nothing X app unlocks a range of customisation options, including a personalised equaliser, bass enhancement, control remapping, ear tip fit testing, firmware updates, dual-device management, a Find My Earbuds feature, and low-latency mode settings. When it comes to the battery, the earbuds house a 46mAh lithium-ion battery, while the charging case contains a 500mAh cell. With ANC disabled, users can expect up to 9.5 hours of playback from the earbuds and up to 42.5 hours in total with the charging case. With ANC enabled, battery life is rated at up to 5.5 hours per charge and up to 24.5 hours combined with the case. Finally, fast charging is also supported that should provide up to 10 hours of playback from a 10-minute charge with ANC turned off. Nothing Ear (a) Wireless Earbuds (Black): $53.20 (Amazon US) - 33% The CMF Buds Pro 2 feature a dual-driver audio system consisting of an 11mm bass driver and a 6mm micro-planar tweeter. The earbuds use PU (polyurethane) and PET (polyethylene terephthalate) titanium-coated diaphragms and are tuned by Nothing to deliver balanced audio performance. They further support active noise cancellation of up to 50dB across a frequency range of up to 5,000Hz, and noise control features include a Smart ANC algorithm, Adaptive ANC, Transparency Mode, and Clear Voice Technology 2.0. For calls, the CMF Buds Pro 2 use a total of six microphones and feature an environmental noise-cancelling algorithm, Clear Voice Technology 3.0, and Wind Noise Reduction 3.0 that should improve voice clarity during conversations. Furthermore, when it comes to the connectivity, it is provided through Bluetooth 5.4. Additional features include an IP55 rating for dust and water resistance, Google Fast Pair, Microsoft Swift Pair, in-ear detection, a low-latency mode, and a Find My Earbuds function. Moreover, through the Nothing X app for Android and iOS, users can access custom EQ settings, a bass enhancement algorithm, customisable controls, Find My Earbuds, low-latency mode, dual-device connectivity, an ear tip fit test, and firmware updates. The earbuds contain a 60mAh rechargeable lithium-ion battery, while the charging case houses a 460mAh battery. A full charge of the earbuds and case via USB-C should take approximately 85 minutes, while the earbuds alone should be fully recharged in the case in around 60 minutes. Battery life is rated at up to 11 hours of playback on a single charge and up to 43 hours with the charging case when ANC is turned off. With ANC enabled, playback time is reduced to up to 6.5 hours on the earbuds and up to 26 hours with the charging case. Talk time is rated at up to 6 hours on the earbuds and 25 hours with the case with ANC disabled, or up to 4.8 hours and 18.6 hours, respectively, with ANC enabled. CMF Buds Pro 2 Wireless Earbuds (Dark Grey): $37.05 (Amazon US) - 24% Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      542
    2. 2
      +Edouard
      186
    3. 3
      Michael Scrip
      77
    4. 4
      PsYcHoKiLLa
      76
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!