Speakers are ALWAYS the weakest link


Recommended Posts

Audio reproduction, for those that care is about establishing a solid ecosystem, where all components (source, amp, speakers etc.) compliment each other.

It isn't a matter of Speaker A being "better" than B, or amp A vs B, when different configurations will meet different requirements. For those on a tight budget, which is where this thread started, its about getting your moneys worth. For everyone else, it is about piecing together a system that works best, source material included.

Audio reproduction, for those that care is about establishing a solid ecosystem, where all components (source, amp, speakers etc.) compliment each other.

It isn't a matter of Speaker A being "better" than B, or amp A vs B, when different configurations will meet different requirements. For those on a tight budget, which is where this thread started, its about getting your moneys worth. For everyone else, it is about piecing together a system that works best, source material included.

Well said, I don't see any one piece of the chain being more important than the others. Getting bang for your buck can be challenging, and there is no such thing as inexpensive/cheap audiophile gear, but you can get rather decent quality from a nice blend of affordable gear with a little effort. Of course if you get obsessive enough then you have to start looking at room acoustics and now you are off a cliff. This seems like an argument about an argument.

i say that the the amp matters, not for you directly, but for the speakers you are using... every speaker has its 'favourite' amp, where bad characteristics cancel each other out and the good things combine to create something greater than their sum

just like there is no speaker which would sound good with every single amp out there, there is no amp which would drive every speaker beautifully... just because the amp is more expensive, doesnt mean that it will definitely work better with the speakers you have, and vice versa

but if cost truly is an issue and i have to choose what to spend on... then the speakers are primary to me, i feel better about having a capable set of speakers recreating the sound of a not-so-good amp, rather than having an expensive amp obscured by lousy speakers... it kind of gives breathing space and a better sense of the electronic domain of your setup, you could try different things like adding induction loops and bi-cabling the wires and stuff like that to mess with the sound if you dont like what's coming out of the amp

i think the problem for most of us is that we simply dont have a whole shop's worth of different amps and speakers to choose from, in our living room where we will actually be using the setup nonetheless... the acoustics of your room is likely to differ from the showroom, thats another factor

Huh? How much would you spend on the preamp/amp or receiver and a media source then? Say you got something decent for $500-600 bucks; you'd spend $4500 on the speakers?

My Yamaha amp was cheaper than that. It is a fairly basic model that offered low total harmonic distortion compared to its price competitors.

My front/main speakers are fairly nice but they are relatively huge (double base cones in each) and thus my wife hates them.

1 test with 25 people and a small number of amps is hardly conclusive....

Well, it's indicative.

You don't have to smell every steer's butt to know what bullsh*t smells like. :p

There were enough tests run that audible differences could have been determined at very statistically significant levels, yet the listeners preformed no better than random guessing. :spindj:

Edited by shakey_snake

So essentially - we should only be completely scientific when it suits us?

Taking that stance... I am not sure how that you are any different from the 'audiophile' crowd...

The sample size is small enough to potentially be a statistical anomaly...

I am personally of the belief that you take a number of factors into consideration including if you like the sound (my current amp is Onkyo TX-SR876 which retails for around ?700 in the UK at a good price) - I did audition more expensive (up to ?2000) and less expensive amps (down to ?250) and found that I liked the sound of this one best. My speakers are a set of KEF KHT3005 which retailed at around ?900 when I bought them. Now say what you want, I did the due diligence to ensure I was happy with my purchase and give the same advice to anyone who asks me - buy the one you like the sound of that falls somewhere below the maximum you want to spend...

So essentially - we should only be completely scientific when it suits us?
How do you figure that's what I'm saying?

If you for some reason think that different amps or different receivers would make a difference, than I'd certainly encourage you to do your own trials. However, without a convincing hypothesis as to why more amps or listeners would make a difference, and without having properly done more testing that has significant results to the contrary, then I have little reason to share in your skepticism at the applicability of the results of this test.

Taking that stance... I am not sure how that you are any different from the 'audiophile' crowd...

The sample size is small enough to potentially be a statistical anomaly...

The sample size is among the largest I've seen for such a test.

In fact this study is 20 years old really says something. This study really lead to a lot emotionally (as opposed to logically) driven "audiophiles" to completely reject blind testing, and ABX in particular. On what grounds? Mostly nonsense. You can find quite a bit of articles from "audio subjectivists" bashing this study online, but I have yet to see one that was even close to logically based.

Additionally, the fact that technology has exploded progressively in the last 20 years, really makes one consider: if solid-state amps were transparent 20 years ago (or even close to it) than they have to even be moreso now.

I am personally of the belief that you take a number of factors into consideration including if you like the sound (my current amp is Onkyo TX-SR876 which retails for around ?700 in the UK at a good price) - I did audition more expensive (up to ?2000) and less expensive amps (down to ?250) and found that I liked the sound of this one best. My speakers are a set of KEF KHT3005 which retailed at around ?900 when I bought them. Now say what you want, I did the due diligence to ensure I was happy with my purchase and give the same advice to anyone who asks me - buy the one you like the sound of that falls somewhere below the maximum you want to spend...

1. The price of your gear is completely irrelevant here, and I'm not sure why you've brought it up other than you feel like doing some sort of offhanded braggi;). ;)

2. How are you even certain that you "liked the sound" of any of them or could even hear a difference?

For ****s sake, I have 2 amps next to me now, I have a yahama and an onkyo 505, and the yahama is a cheap system which came with speakers as well for ?150. And the onkyo was ?200 for the amp itself. I have a pair of denon 100 watt speakers, and a pair of acoustic solution 180 watt speakers ( cba to find the model, so the watts will have to do ;P). I can tell you for a fact, that my onkyo sounds a lot better than the yahama, and it's not just me who can hear it, my room mate can, and even the cleaners at my school (im at boarding school).

My dad was a hi-fi technician, and he did spend alot on his speakers, and they sound amazing, and he was running a denon amp for 4 years, before he upgraded to the new AVC-A1XVA. And once again the new one sounds alot better, on exactly the same speakers.

Most amps do all the pre-processing, so of course there's going to be a change in quality.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Each of the devices displayed on this page now has a little volume meter next to it to show if there is audio actively playing. About time.
    • Owing to the nature of Windows feature enablement updates, it was distributed over Windows Update services as a complete system upgrade rather than as an ordinary cumulative update
    • Microsoft confirms Windows 11 26H2, urges IT admins to prepare for release by Usama Jawad Windows 11 typically follows an annual update cycle, but Microsoft recently broke that tradition a bit by releasing a "26H1" version in the first half of this year as a "scoped" build for select new silicon PCs only. This version was not available for customers using 24H2 and 25H2 builds, as Microsoft is busy preparing version 26H2 for them, confirmed officially for the first time. In a Windows IT Pro blog, Microsoft has urged IT admins to prepare for the upcoming release of Windows 11 version 26H2. The company has confirmed that this will be a small enablement package (eKB) that will simply light up certain disabled features that are already present in the operating system's code base. This means that the "refined" Windows update and deployment experience will be simpler and quicker, with minimal disruptions, as the feature update will simply toggle a few flags rather than performing a complete replacement. Microsoft has explained that this is all possible because the standard Windows 11 releases share the same servicing branch and hence, the same source code. However, this also means that Windows 11 26H1 users won't be able to upgrade to 26H2 as that is a different branch, but this is something we have known for a while now. Similar to previous annual feature updates, Windows 11 26H2 will offer the following support cycles: 24 months of support for Home, Pro, Pro EDU, and Pro for Workstations editions 36 months of support for Enterprise, Education, IoT Enterprise, and Enterprise Multi-session editions Microsoft has not confirmed a concrete release date for Windows 11 26H2, but noted that it is "coming soon". If we go by the ongoing release cadence, we can expect it to begin rolling out in early October 2026. As such, IT admins have been encouraged to begin validating Windows Insider releases in the Experimental Channel, plan rollout rings, and strategize the utilization of their existing deployment tools.
    • Windows 11 gets new audio improvements in the latest builds by Taras Buria Today's Experimental builds (26H1 and Future Platforms, formerly Canary) pack several audio-related improvements. If your device is enrolled in the Experimental Channel (26H1), you can download build 28120.2315, while those in the Future Platforms version have build 29613.1000 to try. Here is what is new in build 29613.1000: [Audio] Following up on our previous improvements, we’re making some more adjustments to Settings > System > Sounds based on your feedback. Namely, we’ve updated the “All sound devices” page so: You now have the ability to change default devices from this page. Each of the devices displayed on this page now has a little volume meter next to it to show if there is audio actively playing. We’ve adjusted the page design slightly so now you can filter whether you’re viewing input or output devices. We’ve added toggles so you can choose if you want to hide or show disabled, disconnected, and unplugged devices on this page. We’ve also updated the input and output audio properties page for devices in Settings to now include jack information for those that need it. And here is the changelog for build 28120.2315: This update includes a small number of minor bug fixes and improvements. [Accessibility] This update improves caption style responsiveness by redrawing captions immediately for caption style changes. If no current caption is visible, a sample caption string is displayed. [Audio] This update improves the reliability of the inbox HD Audio driver. You can find the official release notes for build 28120.2315 here and for build 29613.1000 here.
  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      576
    2. 2
      +Edouard
      189
    3. 3
      Michael Scrip
      79
    4. 4
      PsYcHoKiLLa
      78
    5. 5
      neufuse
      72
  • Tell a friend

    Love Neowin? Tell a friend!