Harry Potter and the Deathly Hallows (Film)


Recommended Posts

217224231.jpg

In the latest issue of Empire magazine Emma Watson spoke about a scene they have included which was only hinted at in the book: (Spoilers)

?The film opens with Hermione wiping her parents? memories [of her] and leaving their house. You don?t read that in the book; you just know she does it. That?s a scene that Steve Kloves and David Yates wrote for the film, which I was happy about because you see the sacrifice that Harry and Ron make to be Harry?s friend.?

?You never really get a sense of Hermione?s life outside Hogwarts, outside that friendship, and it?s important. You?re choosing between family and friends; it?s pretty brutal. They offer her a cup of tea, completely unaware that anything is about happen, and then I cast a spell that wipes their memory of me. There are photos all around the room, actual childhood pictures of me, and they just dissolve. It?s horrible. And then I have to shut the door and walk out alone.?

I bumped into the guy who plays Ron Weasley at a friends private art showing last night. It was odd to think how rich he must be and the fact that my friends work would probably have been worth more if he had ****ed all over it. He seemed like a down to earth guy though.

Will you stop posting these already. :laugh: At this point I'm so hyped for this movie that I'm gonna go for a midnight premiere along all those cloaked children :p

sounds a bit dodgy :rofl:

I want to go to a midnight screening as well! :D

While I like the TV spot overall (

Dumbledore's ghost

is espicially awesome &

Nagini in Malfoy Manor

both will look awesome in 3d) some shots looked a bit odd like the unnecessary OotP shots and

the circling shot around Luna's house

looks a bit too CGI-ed.

I finally checked and the movie hasn't been shot in 3D, it's going to be converted to 3D from 2D, so I think I'm gonna see 2D version. I saw Clash of the Titans (also converted from 2D) in 3D and compared to movies shot in 3D (ie Avatar) the effect is more chaotic (the depth of field is really unnatural).

Nick Moran's Potter scenes too gory

Nick Moran has revealed that some of his scenes in the new Harry Potter were cut because they were too gory.

The actor-director plays evil villain Scabior, a snatcher from Fenrir Greyback's gang of werewolves, in Harry Potter And The Deathly Hallows.

"The scenes I did were really, really dark, really, really dark, but when I went to see them they cut some of the worst bits out, and I was talking to producer David Heyman, saying, 'Oh no, why's that gone?' He said, apparently it was like watching Saw," Nick told Absolute Radio DJ Christian O'Connell.

Nick - who is promoting his second directorial effort, The Kid, starring Natascha McElhone - has enjoyed being part of the final Harry Potter film, which will be released in two parts.

"It's been brilliant. I'm the new baddie in the Harry Potter film. I can't really give too much away - it's hilarious, because your script has a watermark in it," he recalled.

"It says a number, which is on every page, so that if you lose it, everyone knows it was you. So it's all top secret."

:: The Kid is in cinemas now.

Source: http://www.google.com/hostednews/ukpress/article/ALeqM5gmG7lyl0AJWYrI7ylSQT-ON7jwdw

No idea what the heck could possibly be Saw-worthy that they had to cut, we know from the test screening that the scene with

ron splinched (sp?) will show his shoulder's exposed muscles and bone and would be fairly bloody

but that's not what is reported in this news article. If DH got a PG rating as HBP I would shoot myself. :p

I finally checked and the movie hasn't been shot in 3D, it's going to be converted to 3D from 2D, so I think I'm gonna see 2D version. I saw Clash of the Titans (also converted from 2D) in 3D and compared to movies shot in 3D (ie Avatar) the effect is more chaotic (the depth of field is really unnatural).

Not all the converted 2D films would be rushed with a crappy result as Clash of the Titans, I haven't seen Alice in Wonderland but I read before that the 3D effect was pretty good and it wasn't shot in 3D.

I'm not sure what todo in terms of how to watch Deatlhy Hallows. Where possible, I prefer to goto the IMax - it's a bit more expensive, but usually it's worth paying that lil bit extra, given the screen size, resolution, and fact that it's generally a better environment to watch a film, compared to a regular cinema. However, 3D drives me barmy - I'm not a huge fan of it, and the only time it's ever worked - which was Avatar (IMax, again), it gave me the mother of all headaches.

Does anyone know if this'll be like the last HP film - where there are just certain sequences that are "presented" in 3D - like the opening of HP6, or will the entire film be in 3d?

Not all the converted 2D films would be rushed with a crappy result as Clash of the Titans, I haven't seen Alice in Wonderland but I read before that the 3D effect was pretty good and it wasn't shot in 3D.

I saw Alice in 3D at the theater and the result wasn't that good, the problem with converted movies is the depth of field I've mentioned above - the scenes are 3D, you can see depth, but parts of the frame are still out of focus - for me it's really confusing.

It will be entirely in 3d...

Hmm - dilema, dilema time then - Where humanly possible, I prefer not to watch 3D films, but on the other hand, I waaay prefer going to the IMax these days.

I'll probably decide closer to the release date, when the reviews start to filter in.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • First exciting thing to come to Windows in a long time ! This is the kind of things they should focus on, instead of cramming as much AI as they can in everything.
    • New AMD graphics driver fixes install issues and FSR 4.1 crashes on RX 7000 GPUs by Taras Buria AMD is rolling out yet another graphics driver. Version 26.6.4 is now available for download, bringing two important fixes. One is for those still using Windows 10 and having trouble installing driver 26.6.2. In fact, this patch is coming from the recently released hotfix, so it is not new if you are already running version 26.6.3. The second fix is for RX 7000 owners. AMD recently brought FSR 4.1 support to the previous-gen graphics cards, but there was a bug with certain games crashing when using FSR 4.1. I experienced this issue with Forza Horizon 6, so today's driver should take care of that. Here is the official changelog: Intermittent install issue seen when installing AMD Software: Adrenalin Edition 26.6.2 on Windows® 10 systems for Radeon™ RX 7000 series and above graphics products. Intermittent application crash may be observed in some games with AMD FSR Upscaling 4.1 enabled on Radeon™ RX 7000 series graphics products. Known issues include the following: Intermittent application crash or driver timeout may be observed while playing Battlefield™ 6 on AMD Ryzen AI 9 HX 370. AMD is actively working on a resolution with the developer to be released as soon as possible. Texture flickering or corruption may appear while playing Battlefield™ 6 with AMD Record and Stream on some AMD graphics products. AMD FSR Upscaling and AMD FSR Frame Generation may show as inactive in AMD Software: Adrenalin Edition while playing Battlefield™ 6 when enabled on Radeon™ RX 9000 series graphics products. Failure to install may be observed while installing AI Bundle components in some regions with limited access to HuggingFace and GitHub. Model flickering or rendering failure may be observed in Maxon Cinema 4D and Blender on Radeon™ RX 7000 series and above graphics products. Users experiencing this issue are recommended to install AMD Software: Adrenalin Edition 26.3.1. Intermittent application crash may be observed on some models while running Blender on Radeon™ RX 7000 series and above graphics products. Users experiencing this issue are recommended to install AMD Software: Adrenalin Edition 26.3.1. You can download the AMD Radeon driver 26.6.4 from the official website here. Full release notes are available on the same page.
    • Amazon may use OpenAI and Nova models after Anthropic reportedly raises costs by Karthik Mudaliar Amazon is reportedly considering to use OpenAI models and even its own Nova family of AI models after Anthropic raised the cost of using Claude inside Amazon services. According to a report from The Information, Amazon is weighing its options to reduce costs under a new arrangement with Anthropic. But back in April, Amazon said it would invest $5 billion more in Anthropic, with the possibility of adding up to another $20 billion if certain commercial milestones are met. That investment actually came on top of another $8 billion Amazon had already put into the Claude maker. Anthropic, meanwhile, committed to spend more than $100 billion over 10 years on AWS technologies, including Amazon’s Trainium chips. Amazon isn't just a customer of Anthropic but also one of the most important backers and cloud partners. This is why it makes it interesting that Amazon is considering other alternatives to handle its internal workloads. Although Amazon has been building its own options for a while now. Its Nova family of AI models was announced in late 2024 for Amazon Bedrock, with models aimed at text, image, and video tasks. Amazon pitched the model around cost and latency at that time. With that said, OpenAI has also become a more realistic option recently for AWS customers as well as for Amazon itself. Earlier this year, OpenAI brought its latest models and Codex coding agent to Amazon Bedrock, after changes to its previously more restrictive Microsoft cloud arrangement. This allowed AWS to serve even those customers who wanted other alternatives from Claude, without having to move workloads out of Amazon's cloud. Evaluating alternatives could also be due to commercial pressure and not necessarily a sign of a damaged partnership between Amazon and Anthropic. Whether or not Amazon is actually considering switching entirely to OpenAI's models or its own Nova models remains unknown at this moment.
    • Samsung introduces new AI classroom tools and interactive displays at ISTELive 2026 by Fiza Ali Samsung has announced several new education-focused software features and interactive displays for schools during ISTELive 2026, taking place in Orlando, Florida, from 28 June to 1 July. The focus of these updates is on making shared classroom displays easier to use for teachers while giving IT administrators more control over managing devices. One of the key additions is the Samsung Account Management Solution (AMS). In many schools, multiple teachers share the same interactive display throughout the day, which means signing in and setting everything up can become repetitive. With AMS, teachers can log in by scanning a QR code or tapping an NFC-enabled ID card. Once signed in, their personalised workspace, including wallpapers, bookmarks, app shortcuts, and files, can be instantly accessed through Home Personalisation. Samsung has also included a screen lock feature, allowing teachers to lock the display if they need to step away briefly. Furthermore, the company is also updating its Education Portal with new tools designed for school IT administrators. The portal will allow IT administrators to register teachers, enrol devices, and manage user access from a central dashboard. Administrators can also link NFC cards to teacher accounts, making sign-ins quicker across shared displays. Another addition is a Tags feature that lets schools organise displays by building or classroom. Those tags can also be used to send emergency notifications to selected Samsung Interactive Displays through compatible platforms such as InformaCast and Raptor. Moreover, the tech giant's AI Assistant is gaining several new features aimed at supporting everyday classroom tasks such as lesson planning and classroom engagement. One of the features is Circle to Search, which lets teachers circle text or images on the display to quickly find related information, videos, or web results without interrupting the lesson. The content can then be brought into Samsung Whiteboard. Another feature, Live Transcript, converts spoken lessons into real-time captions, which could be useful for students with hearing impairments or those in multilingual classrooms. The AI Assistant also introduces AI Summary and AI Quiz. The summary tool creates summaries of recorded lessons, while AI Quiz generates questions based on lesson content so teachers can quickly check how well students are following along. Teachers signed in through Samsung AMS can also return to their previous AI-generated lesson materials without logging in again. Alongside the software updates, Samsung has expanded its Android-based Interactive Display range with three new models: the WAF-S, WAFX-PS, and WAHX-M. The WAF-S and WAFX-PS ship with Android 16, bringing updates to security, accessibility, and overall usability while maintaining compatibility with Google's education services including Google Classroom and Google Drive through EDLA certification. Meanwhile, the new WAHX-M is the biggest addition to the lineup, introducing a 98-inch display for larger spaces such as lecture halls and conference rooms. It will also be available in 65-inch, 75-inch and 86-inch sizes. Samsung says the WAHX-M further includes on-device AI features such as voice commands, text-to-speech, and an AI calculator, alongside support for Samsung AMS and AI Assistant. Samsung AI Assistant has been available since April, while Samsung AMS and the updated Education Portal will begin rolling out in July.
    • It's been $24 (single) or $89 (4-pack) for many days on both Amazon and Walmart as far as I know. That isn't a big discount. If these end up like the 1st gen, the 4-pack will routinely get down around $80, give or take a dollar. I think they have even hit $69 at times.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      536
    2. 2
      +Edouard
      269
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      97
    5. 5
      macoman
      63
  • Tell a friend

    Love Neowin? Tell a friend!