• 0

Remote Desktop Connection using MSTC/Terminal


Question

I'll need to connect to a desktop in a different city (remotely). Both systems which are gonna be used run Windows..

I do get the concept of VNC - but getting the VNC server to run in the other system is the real pain..

Can MSTSC (Microsoft Terminal Services) built into Windoze achieve this? Do I just need to get the other IP address? Is it that simple? Bear in mind I'll be using the internet to connect to the other remote PC ..

I could probably use TERMINALS over MSTSC as it does have other advantages..

So again, If I do connect over the net, is it just the IP address that I require? Do I need to know of any open port as well?

EDIT : Spelling mistake in title :( Should've been MSTSC for MSTC..

Edited by halluc1nati0n

9 answers to this question

Recommended Posts

  • 0

As to using terminals?? How about you just get connected first, and then you can play with 3rd party clients ;)

How is getting VNC a pain?? Following the bouncing ball install - what 15 seconds.

What version of windows is it? Remote desktop is not available in XP home for example

But yes its as simple as enabling it, setting up your router to forward the port to the machine 3389 and then connecting to the public IP address from your client. Be it the built in client or some 3rd party client.

If VNC or RDP are too complicated for you - I would suggest you take a look at teamviewer or logmein, etc.

  • 0
  BudMan said:
As to using terminals?? How about you just get connected first, and then you can play with 3rd party clients ;)

How is getting VNC a pain?? Following the bouncing ball install - what 15 seconds.

What version of windows is it? Remote desktop is not available in XP home for example

But yes its as simple as enabling it, setting up your router to forward the port to the machine 3389 and then connecting to the public IP address from your client. Be it the built in client or some 3rd party client.

If VNC or RDP are too complicated for you - I would suggest you take a look at teamviewer or logmein, etc.

As to VNC, I'll have to set up and keep the server running at the other PC right ?

Take it that that the ppl at the other PC's place are totally computer - illiterate so it ain't possible at all ..

So I'll be limited to Windoze clients.. What do you say? XP home doesn't even have MSTSC?

And I'll need a dedicated port as well (which has to be forwarded)?

  • 0

I guided my mother to install VNC (agree, next, next, finish, type a password). RDP is also easy. Cpanel, system, remote, tick allow, add a user to be allowed to login remotely.

Both will need dedicated ports to be forwarded if they are behind a router. Considering they are clueless, you'd probably end up doing everything yourself.

As suggested, you could save yourself the hassle and give teamviewer a try.

  • 0
  halluc1nati0n said:
As to VNC, I'll have to set up and keep the server running at the other PC right ?

Take it that that the ppl at the other PC's place are totally computer - illiterate so it ain't possible at all ..

So I'll be limited to Windoze clients.. What do you say? XP home doesn't even have MSTSC?

And I'll need a dedicated port as well (which has to be forwarded)?

You have many options as stated on this thread.

RDP (or MSTSC) is very easy to setup. On the PC that you want to connect to, right click on My computer, go to Properties, then Remote, then Under Remote Desktop, make sure that "Allow users to connect remotely to this computer" is checked (If this option isn't there then the PC is using XP home, which as stated by Budman isn't in XP Home)

After RDP is enabled, like budman said, you need to port forward port 3389 on your router/firewall

once this is done all you need is the external ip and you should be able connect remotely from any other PC.

If you cannot enable RDP for some reason then like budman stated www.logmein.com is very easy to use, my company uses it on plenty of our clients when we cannot port forward 3389.

I've never used teamviewer before, but I'm sure its good alternative as well if BudMan recommends it. ;)

  • 0

Easy, This is how I did it. Just forward port 3389 on your router. Then you should be able to login from anywhere. Another quick tip is register a Dynamic DNS from DynDNS or somewhere like that (If you haven't already got a static IP address) this makes it alot easier.

  • 0
  halluc1nati0n said:
As to VNC, I'll have to set up and keep the server running at the other PC right ?

Take it that that the ppl at the other PC's place are totally computer - illiterate so it ain't possible at all .

It starts as a service. They don't even have to log in once it's installed, never mind start the server for you. There's a much setup as enabling RDP, since the RDP server is not on by default.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I'd concur too, as an informed enthusiast I'd find it a good deal, but your average Joe just wants cheap as possible and it's hard to beat Amazon or Ebay builds for that.
    • Now you know how many would-be Windows 11 users felt. I’m not justifying any of it, but MS and Apple both do it.
    • An Air India plane with 242 people on board crashed Thursday near a major international airport in the western Indian city of Ahmedabad, the airline and the country's government said. https://www.nbcnews.com/world/asia/air-india-plane-crashes-indias-ahmedabad-airport-rcna212545
    • NTLite 2025.06.10473 by Razvan Serea NTLite is a Windows configuration tool that allows you to modify your existing Windows install or an image yet to be deployed, remove Windows components, configure and integrate, speed up the Windows deployment process. Reduce Windows footprint on your RAM and storage drive memory. Remove components of your choice, guarded by compatibility safety mechanisms, which speed up finding that sweet spot. Windows Unattended feature support, providing many commonly used options on a single page for easy setup. Easily integrate a single or multiple drivers, update or language packages. Package integration features smart sorting, enabling you to seamlessly add packages for integration and the tool will apply them in the appropriate order, keeping hotfix compatibility in check. One of the important new features of NTLite (compared to its predecessors) is the ability to modify an already installed the operating system, by removing unnecessary components. Supports Windows 11, 10, 8.1 and 7, x86 and x64, live and image. Server editions of the same versions, excluding support for component removals and feature configuration. ARM64 image support in the alpha stage. Does not support Checked/Debug, Embedded, IoT editions, nor Vista or XP. NTLite 2025.06.10473 changelog: Upgrade UI: Text size now set as host, more readable on some systems Post-setup: Loading progress improvement for the 99% delay Components: ‘Snipping tool’ compatibility option UI-Translation: Thanks for Romanian (Coman) Fix Updates: Parallel WinRE integration getting stuck Updates: Download overwrite previous Defender updates Settings: Win10 News widget disabling Download: NTLite 64-bit | 21.5 MB (Free, paid upgrade available) Download: NTLite 32-bit | 19.3 MB Link: NTLite Home Page | NTLite Features | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      elsafaacompany earned a badge
      Week One Done
    • Week One Done
      Yianis earned a badge
      Week One Done
    • Veteran
      Travesty went up a rank
      Veteran
    • One Month Later
      somar86 earned a badge
      One Month Later
    • Week One Done
      somar86 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      ATLien_0
      260
    3. 3
      +Edouard
      183
    4. 4
      +FloatingFatMan
      183
    5. 5
      snowy owl
      132
  • Tell a friend

    Love Neowin? Tell a friend!