• 0

Remote Desktop Connection using MSTC/Terminal


Question

I'll need to connect to a desktop in a different city (remotely). Both systems which are gonna be used run Windows..

I do get the concept of VNC - but getting the VNC server to run in the other system is the real pain..

Can MSTSC (Microsoft Terminal Services) built into Windoze achieve this? Do I just need to get the other IP address? Is it that simple? Bear in mind I'll be using the internet to connect to the other remote PC ..

I could probably use TERMINALS over MSTSC as it does have other advantages..

So again, If I do connect over the net, is it just the IP address that I require? Do I need to know of any open port as well?

EDIT : Spelling mistake in title :( Should've been MSTSC for MSTC..

Edited by halluc1nati0n

9 answers to this question

Recommended Posts

  • 0

As to using terminals?? How about you just get connected first, and then you can play with 3rd party clients ;)

How is getting VNC a pain?? Following the bouncing ball install - what 15 seconds.

What version of windows is it? Remote desktop is not available in XP home for example

But yes its as simple as enabling it, setting up your router to forward the port to the machine 3389 and then connecting to the public IP address from your client. Be it the built in client or some 3rd party client.

If VNC or RDP are too complicated for you - I would suggest you take a look at teamviewer or logmein, etc.

  • 0
  BudMan said:
As to using terminals?? How about you just get connected first, and then you can play with 3rd party clients ;)

How is getting VNC a pain?? Following the bouncing ball install - what 15 seconds.

What version of windows is it? Remote desktop is not available in XP home for example

But yes its as simple as enabling it, setting up your router to forward the port to the machine 3389 and then connecting to the public IP address from your client. Be it the built in client or some 3rd party client.

If VNC or RDP are too complicated for you - I would suggest you take a look at teamviewer or logmein, etc.

As to VNC, I'll have to set up and keep the server running at the other PC right ?

Take it that that the ppl at the other PC's place are totally computer - illiterate so it ain't possible at all ..

So I'll be limited to Windoze clients.. What do you say? XP home doesn't even have MSTSC?

And I'll need a dedicated port as well (which has to be forwarded)?

  • 0

I guided my mother to install VNC (agree, next, next, finish, type a password). RDP is also easy. Cpanel, system, remote, tick allow, add a user to be allowed to login remotely.

Both will need dedicated ports to be forwarded if they are behind a router. Considering they are clueless, you'd probably end up doing everything yourself.

As suggested, you could save yourself the hassle and give teamviewer a try.

  • 0
  halluc1nati0n said:
As to VNC, I'll have to set up and keep the server running at the other PC right ?

Take it that that the ppl at the other PC's place are totally computer - illiterate so it ain't possible at all ..

So I'll be limited to Windoze clients.. What do you say? XP home doesn't even have MSTSC?

And I'll need a dedicated port as well (which has to be forwarded)?

You have many options as stated on this thread.

RDP (or MSTSC) is very easy to setup. On the PC that you want to connect to, right click on My computer, go to Properties, then Remote, then Under Remote Desktop, make sure that "Allow users to connect remotely to this computer" is checked (If this option isn't there then the PC is using XP home, which as stated by Budman isn't in XP Home)

After RDP is enabled, like budman said, you need to port forward port 3389 on your router/firewall

once this is done all you need is the external ip and you should be able connect remotely from any other PC.

If you cannot enable RDP for some reason then like budman stated www.logmein.com is very easy to use, my company uses it on plenty of our clients when we cannot port forward 3389.

I've never used teamviewer before, but I'm sure its good alternative as well if BudMan recommends it. ;)

  • 0

Easy, This is how I did it. Just forward port 3389 on your router. Then you should be able to login from anywhere. Another quick tip is register a Dynamic DNS from DynDNS or somewhere like that (If you haven't already got a static IP address) this makes it alot easier.

  • 0
  halluc1nati0n said:
As to VNC, I'll have to set up and keep the server running at the other PC right ?

Take it that that the ppl at the other PC's place are totally computer - illiterate so it ain't possible at all .

It starts as a service. They don't even have to log in once it's installed, never mind start the server for you. There's a much setup as enabling RDP, since the RDP server is not on by default.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • i built my own, all ya need is a pc with two network cards and i used operwrt as the os
    • hi thanks for input. those two modems are supported  thankfully. i really am leaning towards the b12 though since there's a few complaints of the cm3000 and its chipset (drops and whatnot), although those might just be vocal minority complaints.
    • A PDF or text file is all you need for Copilot to generate a PowerPoint for you in seconds by Usama Jawad Assistive AI is all the rage these days. In the past few hours alone, we have witnessed AI summaries on YouTube, context-aware text generation capabilities in Google Sheets, Gemini tools on the cloud, the availability of additional AI models with smarter defaults in Visual Studio, and chat summarization on WhatsApp. Now, Microsoft has detailed an upcoming Copilot capability in PowerPoint. Microsoft has outlined a streamlined approach to creating PowerPoint presentations within seconds using a PDF or text file, and a natural language prompt as input. Previously, you could just ground Word files for this purpose, so support for additional formats is certainly welcome. In order to generate a slide deck using Copilot, you can simply open a PowerPoint presentation in the platform of your choice and click the Copilot button. In the resulting Copilot pane, select the "Create a presentation from a file" option, which allows you to type in the name of a PDF or text file stored on the cloud or browse for files in OneDrive or SharePoint manually using the "Attach cloud files" button. You can then refine your prompt by adding details about items that you'd like Copilot to focus on and click the "Send" button. This will generate the slide deck which you can rearrange or add more topics to, before you create the final version of the presentation. Of course, this is a particularly useful feature in many scenarios including those which require you to create a slide deck based on some detailed documentation that you have already completed. That said, it's obviously worth vetting any content that Copilot creates, since data inaccuracy is still a concern when it comes to AI models. This feature is available to Insiders across PowerPoint for web, Windows, and Mac for the following versions: Windows: Version 2409 (Build 18025.20000) or later Mac: Version 16.88 (Build 24082514) or later That said, you do need an Enterprise Copilot license in order to utilize the AI assistant in this way.
  • Recent Achievements

    • One Month Later
      jfam earned a badge
      One Month Later
    • First Post
      TheRingmaster earned a badge
      First Post
    • Conversation Starter
      Kavin25 earned a badge
      Conversation Starter
    • One Month Later
      Leonard grant earned a badge
      One Month Later
    • Week One Done
      pcdoctorsnet earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      541
    2. 2
      ATLien_0
      200
    3. 3
      +FloatingFatMan
      177
    4. 4
      Michael Scrip
      146
    5. 5
      snowy owl
      114
  • Tell a friend

    Love Neowin? Tell a friend!