Play MKV files on Xbox 360 without transcoding


Recommended Posts

  Audioboxer said:
Yeah I'm just wondering because native video playback either off hard drive or streaming depends on the codecs your console supports, not your PC. The only time PC codecs matter is if you require to transcode a video on your PC first before streaming it.

Also yes, .mts/.m2ts and AVCHD's work on the PS3.

There's two ways you can play media on the 360 - either stream it over the network, or connect through windows media extender. The former relies on the codecs available on the 360 whereas the latter works like remote desktop (it essentially logs into your PC under a special account) so that works on codecs available on the comp.

That's why you can't play XVID through the 2nd method if you're using Vista 64bit atm because there's no 64-bit divx codec for Windows Media Center.

  chAos972 said:
There's two ways you can play media on the 360 - either stream it over the network, or connect through windows media extender. The former relies on the codecs available on the 360 whereas the latter works like remote desktop (it essentially logs into your PC under a special account) so that works on codecs available on the comp.

That's why you can't play XVID through the 2nd method if you're using Vista 64bit atm because there's no 64-bit divx codec for Windows Media Center.

So what is it streaming to your 360 then, a video of your video? [That's what remote desktop would be like no?]

Because if it's streaming the actual video file natively to the 360 it would still need the codec support on the 360 hardware would it not? The 360 can't do the decoding itself if it has no software/codecs to do so... Which means if it's being decoded on the PC, the PC must be sending a video of the video?

Auch, I'm not sure, I'm confused about how it works...

  Audioboxer said:
So what is it streaming to your 360 then, a video of your video? [That's what remote desktop would be like no?]

Because if it's streaming the actual video file natively to the 360 it would still need the codec support on the 360 hardware would it not? The 360 can't do the decoding itself if it has no software/codecs to do so... Which means if it's being decoded on the PC, the PC must be sending a video of the video?

Auch, I'm not sure, I'm confused about how it works...

As a MCE, it remote desktops but then it has a dedicated video stream but it still depends on the codec support on the extender and renders UI on Xbox 360. If you install ffdshow codec on a Vista box, the MC on the computer then will play Xvid/Divx but the extender - Xbox 360 won't. I am equally confused but you can read more here.

  Briandl79 said:
I just stick to WMV's. Sure that can create some availability limitations, but not that much, and I can get 1080P with 5.1.

(800GB)

How do you create/encode those?

  Audioboxer said:
Yeah I'm just wondering because native video playback either off hard drive or streaming depends on the codecs your console supports, not your PC. The only time PC codecs matter is if you require to transcode a video on your PC first before streaming it.

Not quite correct. Many streaming programs also transcode in realtime as you are watching the video on your 360 (or PS3 for that matter). In those cases, it IS the codecs on your computer that matter, not the codec support on your console.

  roadwarrior said:
Not quite correct. Many streaming programs also transcode in realtime as you are watching the video on your 360 (or PS3 for that matter). In those cases, it IS the codecs on your computer that matter, not the codec support on your console.

That's what I meant sorry, I didn't word it great.

  Quote
The only time PC codecs matter is if you require to transcode a video on your PC first before streaming it.

I use PS3MS and it will transcode on the fly.

  dhan said:
As a MCE, it remote desktops but then it has a dedicated video stream but it still depends on the codec support on the extender and renders UI on Xbox 360. If you install ffdshow codec on a Vista box, the MC on the computer then will play Xvid/Divx but the extender - Xbox 360 won't. I am equally confused but you can read more here.

interesting.. so what it seems is that an actual media center extender, like the one that is part of xbox360, really relies on the Media center computer for what it can play.. since win7 media center has additional codecs included natively, the media center extender is able to play those files when connected to a win7 MC computer?

i have a ps3 so always use it to stream any video. but i do have a 360 i should try it out with vista and 7 to see what its like.

  dhan said:
How do you create/encode those?

I don't I acquire them.

I have encoded some WMV's from MKV's in the past, it was pretty time consuming (I only did this for a few things I couldn't find already encoded in WMV and only available as MKV)

  bob21 said:
I really wish people would stop using this crap.

I wish the same. Why would Microsoft support this? I doubt there is a single reputable company supports the mkv container. It seems kind of pointless since you can do the same with an mp4 container and that's widely supported by media extenders etc. Pirates are the one using pushing mkv for some odd reason.

Edited by Deihmos
  Deihmos said:
I wish the same. Why would Microsoft support this? I doubt there is a single reputable company supports the mkv container. It seems kind of pointless since you can do the same with an mp4 container and that's widely supported by media extenders etc. Pirates are the one using pushing mkv for some odd reason.

Yea, its pretty annoying. Why bother creating another format/container, just what we need right? ogg, mp2, mp3, mp4, aac, mkv, wmv, wma, rm, ra, divx, xvid, avi, mov, m2ts, mpeg, mpeg2, ts blah blah blah..

I would be so nice if everyone standardized. All we need is WMV Corona / VC-1 / WM9 if you think about it. Its the most fully feature complete video/audio system. It supports 56k modems up to 50megabit archive quality, does mono voice, to 7.1 surround. Optimized for streaming and archiving. Has incredible video quality. Has a super fast and easy compressor which can also do live encoding/streaming. And is now almost universally hardware accelerated. If you have a DX8 or newer video card, you have full WMV acceleration with DXVA. My Athlon XP 2700+ with ATI X800XL 256, couldn't play a 720p h.264 at more than 1-2FPS. But it could fly on a 1080p WMV file. Im not a fan of locking into a proprietary format, so it would be nice if MSFT would open it up and loosen the licensing fees if there are any?

I do agree h.264 is great too, but it has its limits. It takes much longer to encode to it, and much more horse power to decode it. It took me months to be able to get my 8core Mac Pro (2.8ghz, 6gigs ram, Geforce 8800GT 512meg) to decode mkv's with h.264. Finally got it working with a new ffdshow. And mkv, h.264 and aac, or ac3, or DTS weren't designed to work together as well as WM9 was. They do work together, I'm just saying its not a fully integrated solution. Theres not official one stop encoder solution, and one device might support XYZ, but another doesnt support ZYX... If you get a WM certified device, it all works. I wouldn't mind seeing a good fully supported implementation of h.264 and a good audio codec stick around and compete, but 2 standard formats would be much nicer than the hundreds we have.

  daz- said:
Yea, its pretty annoying. Why bother creating another format/container, just what we need right? ogg, mp2, mp3, mp4, aac, mkv, wmv, wma, rm, ra, divx, xvid, avi, mov, m2ts, mpeg, mpeg2, ts blah blah blah..

I would be so nice if everyone standardized. All we need is WMV Corona / VC-1 / WM9 if you think about it. Its the most fully feature complete video/audio system. It supports 56k modems up to 50megabit archive quality, does mono voice, to 7.1 surround. Optimized for streaming and archiving. Has incredible video quality. Has a super fast and easy compressor which can also do live encoding/streaming. And is now almost universally hardware accelerated. If you have a DX8 or newer video card, you have full WMV acceleration with DXVA. My Athlon XP 2700+ with ATI X800XL 256, couldn't play a 720p h.264 at more than 1-2FPS. But it could fly on a 1080p WMV file. Im not a fan of locking into a proprietary format, so it would be nice if MSFT would open it up and loosen the licensing fees if there are any?

I do agree h.264 is great too, but it has its limits. It takes much longer to encode to it, and much more horse power to decode it. It took me months to be able to get my 8core Mac Pro (2.8ghz, 6gigs ram, Geforce 8800GT 512meg) to decode mkv's with h.264. Finally got it working with a new ffdshow. And mkv, h.264 and aac, or ac3, or DTS weren't designed to work together as well as WM9 was. They do work together, I'm just saying its not a fully integrated solution. Theres not official one stop encoder solution, and one device might support XYZ, but another doesnt support ZYX... If you get a WM certified device, it all works. I wouldn't mind seeing a good fully supported implementation of h.264 and a good audio codec stick around and compete, but 2 standard formats would be much nicer than the hundreds we have.

No.

H264 + DTS or TrueHD is the best combination, followed by AC3.

It's an open source format, Microsoft own WMV/WM9/WMA which makes encoding it even more of a pain in the ass as you have to use/pay for propitiatory software.

There's your biggest reason H264 and MKV are the most popular for rippers, it costs nothing to be able to encode. I encode my Blu Rays and can do one in roughly a days work.

E6600 @ 3.4ghz and 4GB of ram.

H264 is also DXVA compliant by the way, if you encode it correctly.

MKV is just the container, you can easily mux to other containers. The issue here is MS not supporting enough codecs/combinations with the 360, most other media servers like the PS3/Popcorn Hour/etc can easily play what's contained within MKV files.

If they've not been ripped to DXVA standards you may need to transcode or patch the H264 video stream, but that shouldn't be an issue if you're ripping your own movies as you just re-rip. If you're downloading you've got no real "right" to be moaning about anything :p

ps. Ideal scenario is not to encode anything at all, modern day Blu Rays are encoded in AVC, meaning you just rip the disc and the M2TS file will playback natively on many players, PS3 included. A lot of people still encode though as an untouched Blu Ray movie ranges around 25GB+ and the encode can be up to or even less than half the size for no real quality loss.

Edited by Audioboxer

^ H.264 is not open source. :p Assuming you used that term in the sense of "free software".

  Quote
Patent licensing

In countries where patents on software algorithms are upheld, the vendors of products which make use of H.264/AVC are expected to pay patent licensing royalties for the patented technology[clarification needed] that their products use. This applies to the Baseline Profile as well.[5] A private organization known as MPEG LA, which is not affiliated in any way with the MPEG standardization organization, administers the licenses for patents applying to this standard, as well as the patent pools for MPEG-2 Part 1 Systems, MPEG-2 Part 2 Video, MPEG-4 Part 2 Video, and other technologies.

In 2005, Qualcomm, which was the assignee of US Patents 5,452,104[6] and 5,576,767[7], sued Broadcom in US District Court, alleging that Broadcom infringed the two patents by making products that were compliant with the H.264 video compression standard.[8] In 2007, the District Court found that the patents were unenforceable because Qualcomm had failed to disclose them to the JVT prior to the release of the H.264 standard in May 2003.[8] In December 2008, the US Court of Appeals for the Federal Circuit affirmed the District Court's order that the patents be unenforceable but remanded to the District Court with instructions to limit the scope of unenforceability to H.264 compliant products.[8]

Just for anyone thinking of purchasing a network media player like popcornhour and expecting flawless MKV playback think again even if your device can handle the container weather it can actually play the file is hit and miss. And even if the file plays get ready for audiosync hell and forced Chinese subtitles .

Save yourself a lot of time and effort , Get the video and audio bitrates from the MKV file and transcode it with those values . The rusult is a divx avi which has the same resolution, bitrate and filesize as the MKV file with noneof the horrendous compatibility issues .

Avoid, Avoid, Avoid .

  bob21 said:
Just for anyone thinking of purchasing a network media player like popcornhour and expecting flawless MKV playback think again even if your device can handle the container weather it can actually play the file is hit and miss. And even if the file plays get ready for audiosync hell and forced Chinese subtitles .

Save yourself a lot of time and effort , Get the video and audio bitrates from the MKV file and transcode it with those values . The rusult is a divx avi which has the same resolution, bitrate and filesize as the MKV file with noneof the horrendous compatibility issues .

Avoid, Avoid, Avoid .

Yes, hit or miss if you're downloading MKVs off the internet.

Popcornhour requires DXVA compliant encodes which aren't in anyway any less quality, they're just encoded correctly. Something everyone's buddies in the scene did not do to start with on the whole (few groups did, most didn't), although I think DXVA compliancy is now a scene rule.

The scene lives on fastest to release wins, half these groups will sacrifice quality/compatibility in the effort of speed in getting the movie out. Once it's out and if not nuked, it can't be duped, not even by a better quality release. Encoding your own Blu Rays is the way to go if you want to avoid compatibility issues. Although as I said above I'm sure DXVA compliancy is now a scene rule, so most of you will be rejoicing if you have media servers.

Any sort of transcoding results in quality loss to some extent, can be minor, can be major.

Edited by Audioboxer
  bob21 said:
Just for anyone thinking of purchasing a network media player like popcornhour and expecting flawless MKV playback think again even if your device can handle the container weather it can actually play the file is hit and miss. And even if the file plays get ready for audiosync hell and forced Chinese subtitles .

Save yourself a lot of time and effort , Get the video and audio bitrates from the MKV file and transcode it with those values . The rusult is a divx avi which has the same resolution, bitrate and filesize as the MKV file with noneof the horrendous compatibility issues .

Avoid, Avoid, Avoid .

I don't have tools to and don't know how to encode WMV Pro. After WMV, only real option is H.264 in terms of quality/bitrate and pure MP4 solution of H.264/AAC is useless since my receiver/Xbox doesn't know 5.1AAC, then what is the option? H.264+AC3 = AVCHD ;) (or MKV - take your pick).

There is more to video quality than resolution and bitrate. :)

  limok said:
I've gotten MKV's to play on the X360 via the 7 Media Center but the quality is degraded big time, it's like a watching a crappy video capture from a mobile phone.

Same here... All I've done to Win7 RC was installing Haali Matroska Splitter so I could play and see MKV in WMP 12 and WMC 7. XBOX360 played it, but the quality was like 'limok' mentioned before. I am confused now, because I don't know, should I be happy or should I be sad :)

I just want to avoid having another player / STB / whatever for streaming HD media from my PC, because XBOX ought to be just fine, only if MS would reprogram the console to play all possible video/audio formats.

If the quality is different, WMP12/WMC must be transcoding the video....

If it's doing it on the fly, then it will most certainly depend on how powerful your PC is, but there should be some sort of settings somewhere?

Yeaaah, man.. I just love those tiny little hints, Audiboxer, which turn your mind on, to figure out a solution. I've got a winner now.

I said to myslef, to hell with WMC, let me use WMP12 on PC to send streaming signal to XBOX360 (not from WMC on XBOX360 to recieve it). When XBOX360 is configured as Extender to WMC and turned on, WMP12 lets you use command "right click to video / Play to / XBOX360".

I've found Advanced settings in WMP12: Left Alt / Tools / Options / Devices / Advanced

You may see that there is the first checkbox checked by default "Allow video files to convert in the background". All you have to do is to uncheck this setting. Video goes to Extender in a second, without buffering (if converting is enabled, buffering takes some time).

I've tested the fourth checkbox also "Choose quality over speed when converting video (increases the conversion time)" while having first one checked also --> result was also good, bot the processor was quite busy this time, so I preffer disabling converting at all and having processor not busy.

Note: Of course, don't forget to get Haali Media Splitter for Matroska (MKV) installed (or any other solution), so WMP12 may recognize this kind of video container any play it (no need for extra x.264 decoder/codec though, because Windows 7 already have it).

Hope this helped someone!

Can't get mine post to edit :huh: or did not find the function button?!

Nevertheless, post above needs edit for Note at the bottom...

I managed to stream MKV video only on x86 Win7 RC by playing around: not just installingHaali Media Splitter for MKV, but registry patch for MKV to show in WMP library(!) and MAYBE ffdshow-tryouts (not sure if this one is neccessary, but it was installed when it was working).

source: http://a8t8.spaces.live.com/blog/cns!2...8!220.entry

Well, x64 Win7 RC did not have that luck. I managed to play MKVs in WMP12 only by using Haali (even though it is only x86 edition), but in WMC played only when x64 registry patch was installed and MAYBE Gabest MKV Splitter (I installed both at the same time and restarted, so I cannot be sure which one did the magic, if not both). Whenever trying to stream MKV video to Extender by using "Play to" from WMP12, WMC on Extender gave error that there is no codec to play this content?!

Same source for x64: http://a8t8.spaces.live.com/blog/cns!2...8!141.entry

There are many similiar instructions all over the internet.

Testing all this stuff take a lot of time and lots of restarts, so I did not cover all possible combination yet. I went to sleep at 2.30 am :blink:

edit: oh, edit button works here, but did not work on last post, because I am at workplace now :) not at home

  Audioboxer said:
No.

H264 + DTS or TrueHD is the best combination, followed by AC3.

It's an open source format, Microsoft own WMV/WM9/WMA which makes encoding it even more of a pain in the ass as you have to use/pay for propitiatory software.

There's your biggest reason H264 and MKV are the most popular for rippers, it costs nothing to be able to encode. I encode my Blu Rays and can do one in roughly a days work.

E6600 @ 3.4ghz and 4GB of ram.

H264 is also DXVA compliant by the way, if you encode it correctly.

MKV is just the container, you can easily mux to other containers. The issue here is MS not supporting enough codecs/combinations with the 360, most other media servers like the PS3/Popcorn Hour/etc can easily play what's contained within MKV files.

If they've not been ripped to DXVA standards you may need to transcode or patch the H264 video stream, but that shouldn't be an issue if you're ripping your own movies as you just re-rip. If you're downloading you've got no real "right" to be moaning about anything :p

ps. Ideal scenario is not to encode anything at all, modern day Blu Rays are encoded in AVC, meaning you just rip the disc and the M2TS file will playback natively on many players, PS3 included. A lot of people still encode though as an untouched Blu Ray movie ranges around 25GB+ and the encode can be up to or even less than half the size for no real quality loss.

LOL, No.

Actually Yes.

h.264 + DTS is just as closed/open as WMV. The WMV encoder is free and easy to call in 3rd party programs. It doesn't cost anything to encode with WMV.

My point for WMV is that its the most fully complete solution, which streams from dial-up to archive bit-rates, supports mono voice through 7.1 lossless surround. And it's tightly integrated, so the audio and video work well together and it has a tuned container to ensure smooth playback.

I don't deny h.264 + DTS + mkv can work well together, but it wasn't designed from the ground up to work well together. In fact is it wasn't designed to work together from the beginning. And from a business perspective you have multiple vendors and licensing to deal with, and no one for full support (who do you call if the MKV container is screwing up?).

Obviously the ideal solution is not to TRANSCODE anything, but people still do it. I'm saying we should have one, or maybe two fully supported standards. That way I don't have to worry if a video I download will work on my iPhone, or my Mac, or my WD TV, or my Zune (for those who own them).

Also note, many Blu-Ray titles use VC-1 which is actually WMV9 Corona.

  damyang said:
Yeaaah, man.. I just love those tiny little hints, Audiboxer, which turn your mind on, to figure out a solution. I've got a winner now.

I said to myslef, to hell with WMC, let me use WMP12 on PC to send streaming signal to XBOX360 (not from WMC on XBOX360 to recieve it). When XBOX360 is configured as Extender to WMC and turned on, WMP12 lets you use command "right click to video / Play to / XBOX360".

I've found Advanced settings in WMP12: Left Alt / Tools / Options / Devices / Advanced

You may see that there is the first checkbox checked by default "Allow video files to convert in the background". All you have to do is to uncheck this setting. Video goes to Extender in a second, without buffering (if converting is enabled, buffering takes some time).

I've tested the fourth checkbox also "Choose quality over speed when converting video (increases the conversion time)" while having first one checked also --> result was also good, bot the processor was quite busy this time, so I preffer disabling converting at all and having processor not busy.

Note: Of course, don't forget to get Haali Media Splitter for Matroska (MKV) installed (or any other solution), so WMP12 may recognize this kind of video container any play it (no need for extra x.264 decoder/codec though, because Windows 7 already have it).

Hope this helped someone!

wow, this is perfect timing for me. my 360 which i bought for extender is coming on thursday. so this thread has been really useful and informative.

it sounds like most of my videos are going to work fine as they are divx. i will definitely try to get mkv support working with the method you give and i will be using 32bit 7 so hopefully i should have some luck.

  • 2 years later...

Hey All,

First off, im sorry im briniging this topic back from the dead, but i was having issues with getting my xbox 360 setup with the extender etc.

I have the same problem as the initial poster....mkv files look fine on my screen (when on computer) but when run through extender --> xbox 360 --> projector --> 12 foot screen they looked like low res jpegs....

I used the original posters method with "muxing" and it seems far better...but im curious...since the original post is 2 years old..is this still the best way of doing it? is there a better way now with an update to stream....

Some background...

Machine is running win 7 media centre..(intel core 2 duo..e6700 8 gigs ram etc...) all network between machines, xbox is hardwired....xbox runs composite (set to 720p wide screen)) to the projector..(early xbox 360 without hdmi)...but this makes no difference as other 720p movies i have look crystal clear ..

tried tversity straight to xbox...and it kinda sucked as the transcoding didnt always work, or was slow and stuttering.....before i got the xbox i was running styraight from computer Media centre to projector...(but xbox was easier for wife to figure out)

so again, i just wanted to know, are there updates now or better software....that do this mkv through xbox better?

Thanks

Paul

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft 365 Copilot Notebooks now integrated in OneNote on Windows by Paul Hill Microsoft has announced that Enterprise customers with Microsoft 365 Copilot, SharePoint, or OneDrive licenses can now use Microsoft 365 Copilot Notebooks integrated directly with OneNote on Windows. Copilot Notebooks are AI-powered and bring together different resources such as Copilot Chat, files, notes, and links into a single space to make you more productive. The Redmond giant wants to make it easier for customers to gather content, understand complex topics, and create “smarter content” with Copilot Notebooks. This integration is squarely aimed at Enterprise customers, not Personal or Family subscribers. How Copilot Notebooks enhance productivity in OneNote When you open OneNote on Windows, you should see Copilot Notebooks in the left-hand sidebar, from here you can view or edit existing notebooks or you can create one by going to Home > Create Copilot Notebook or New notebook. During the creation of your new notebook, you can give it a name and add references such as OneNote pages, .docx, .pptx, .xlsx, .pdf, or .loop files. This gives Copilot extra context to provide you with more refined answers. Once you have created a notebook and added your reference documents, you can use Copilot Notebooks to help you gather insights from your documents, draft summaries, and generate audio overviews. An important caveat to mention about these notebooks is that you can only add 20 files as references and only individual OneNote pages, as opposed to sections and notebooks, can be added. Microsoft could add support for these in the future, but you can’t add them yet. Another limitation right now is that some OneNote features aren’t functional within Copilot Notebooks, including tags, section groups, inking, templates, password protection, Immersive Reader, and offline support. Availability and what it means for enterprise users Microsoft 365 Copilot Notebooks in OneNote for Windows are available for Enterprise customers with an appropriate license (anyone with a Microsoft 365 Copilot, SharePoint, or OneDrive license) running OneNote Version 2504 (Build 18827.20128) or later. If you have any other feedback to give to Microsoft, you can give it via Help > Feedback. As an Insider preview, Microsoft will likely improve this before declaring it stable so let Microsoft know of any issues you have. Now that the feature is available as a preview, it’s the perfect time for IT admins and other decision-makers to evaluate the feature to see how it could benefit their wider organization.
    • Mixxx 2.5.2 by Razvan Serea Mixxx is powerful, free, and open-source DJ software designed for both beginners and professionals. It offers real-time beatmatching, auto DJ, effects, and MIDI controller support. With a clean interface and compatibility across Windows, macOS, and Linux, Mixxx is ideal for live performances, radio broadcasts, or practice sessions. Its active community and constant updates make it a reliable tool for any DJ. Mixxx integrates the tools DJs need to perform creative live mixes with digital music files. Whether you are a new DJ with just a laptop or an experienced turntablist, Mixxx can support your style and techniques of mixing. Mixxx key features: Realtime audio engine with low-latency performance MIDI and HID controller mapping with customizable scripting (JavaScript-based) Vinyl DVS support (absolute & relative timecode modes) OpenSL, ASIO, WASAPI, and JACK audio backend support Advanced BPM & musical key detection (KeyFinder integration) Quantized beat sync and phase locking Effect chain routing with LADSPA plugin support 4-deck mixing with independent EQ and gain control Support for wide file formats (MP3, FLAC, OGG, WAV, AIFF) Broadcasting via Icecast and Shoutcast with metadata support Library with Crate, Playlist, and Smart Playlist organization Multi-core CPU support for performance optimization Microphone and Auxiliary input routing with talkover ducking OSC and Web MIDI support Skinnable and themable Qt-based UI Cue points, hotcues, and looping with quantization Recording in lossless WAV or compressed formats Clock-synced looping and beatjump Mixxx 2.5.2 changelog: Library Fix playlist export when name contains a dot Fix loading the wrong track via drag and drop when using symlinks Fix: byte order in hotcue comments imported from rekordbox Tracks table: show ReplayGain with max. 2 decimals, full precision in tooltip Fix keyboard mappings with non-ASCII characters on Linux Computer feature: enable initial sorting during population Computer feature: avoid false-positve 'has children' for non-directory links Fix column header mapping when using external library Fixed Single track cover reload on reload metadata from file Controller Mappings Arturia KeyLab Mk1: initial mapping Denon MC7000: slicer mode TypeError Denon MC7000: crossfader curve using wrong parameter DJ TechTools MIDI Fighter Twister: support 4 decks Hercules DJControl Inpulse 500: the crossfader was not reaching 100% to the right end Icon Pro Audio iControls: initial mapping Numark Mixtrack Platinium FX: Fix 4 steps browsing issue Traktor Kontrol S3: Use GUI config for settings Traktor S2 MK3: Fixed LED issue Traktor S4 MK2: Use engine settings API for configuration Traktor S4 MK3: prevent sync lockup, add setting for tempo center snap Controller Backend Control picker: Allow to learn MIDI Aux/Mic enable controls Make [Main],headSplit CO persistent across restart Fix MIDI Controller button learning Fix learning with "No Mapping" selected Unit tests for engine.beginTimer engine-api.d.ts: brake()/spinback() documentation Target support Fix building with a CMake multi-config setup Fix building with gcc >= 14 with LTO and clang >= 19 (fpclassify) Fix: gcc -Warray-bounds= in fidlib by using a flexible member Added Linux Mint Codenames to debian_buildenv.sh Add hidden [Config],notify_max_dbg_time setting to reduce warnings in developer mode Detect arch and fail early if not supported when installing buildenv Misc Vinyl Control: Reduce sticker drift Fix infinite number of pop ups of the "No Vinyl|Mic|Aux|Passthrough input configured" dialog Reduce CPU usage with Trace log messages Fix adjust Gain after adopting it as ReplayGain only in requesting playe Skins: add loop anchor toggle to Deere, Shade, Tango Sound Hardware preferences: add manual link for Mic monitoring modes Work around an Ubuntu, Ibus or Qt issue regarding detecting the current keyboard layout. Fix BPM rounding for the 3/2 case Update cue & play indicators on paused decks when switching cue mode Download: Mixxx 2.5.2 | 113.0 MB (Open Source) Links: Mixxx Home page | Other OSes | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • KDE brings Wayland PiP to Plasma 6.5, adds finishing touches to 6.4 as release nears by David Uzondu The KDE team has released its This Week in Plasma update, showing the final polish being applied to Plasma 6.4 ahead of its June 17 release. Last week, the KDE team brought performance upgrades, and this week the team is continuing that with improvements like faster loading for System Monitor components in Plasma 6.4. Future work for Plasma 6.5 is already underway, and it includes a feature that many have probably been waiting for: proper Picture-in-Picture support on Wayland. This uses an experimental version of the Wayland PiP protocol, which means applications like Firefox that also implement it can finally display PiP windows correctly. It is a long-overdue addition that moves the Wayland session closer to feature parity with X11. The devs also merged KWin's Background Contrast effect into the Blur effect. Virtual desktops can now be re-ordered from the Pager widget, a feature previously missing. Invert and Zoom settings have been moved into the Accessibility page, which is a more sensible place for them than the Desktop Effects page was. The team also brought consistency to the Breeze application style, with animated effects for checkboxes and radio buttons now working in QtQuick-based apps. Other small cleanups include standardizing the section headers in the Disks & Devices, Networks, and Bluetooth widgets. For those who do a lot of screen recording, Spectacle now makes it much clearer how to stop a recording, both in its notifications and shortcut names. As for the immediate future, Plasma 6.4 and its first point release are getting accessibility and user interface tweaks. The team improved text contrast for labels used in secondary roles throughout Plasma, making things like brightness indicators much easier to read. The Kicker Application Menu in 6.4 can now scroll horizontally when a search returns a ton of results, so you can actually see all of them. The team also delivered some stability improvements in Plasma 6.4.0, most notably fixing a long-standing issue where adding widgets to oversized panels could freeze the entire shell. Discover also got a much-needed fix for a crash that occurred when suggesting replacements for unsupported Flatpak apps. On the usability side, dragging files into a Folder View widget no longer causes glitchy visuals, and Open and Save dialogs from Flatpak-based browsers now properly allow the preview pane to open. Printing from Flatpak GTK apps now respects correct sizing, and installing or removing apps no longer wipes out your search input in Kicker or Kickoff while you're using it. Other notable fixes include: Selection rectangles on the desktop now render properly when using custom fonts or sizes (Plasma 6.3.6) A crash in System Monitor charts used by apps and Plasma components has been resolved (Frameworks 6.15) Switching process views in System Monitor no longer causes crashes (Frameworks 6.16) Open and Save dialogs no longer close when hovering over specific files (Frameworks 6.16) A thumbnailer crash on X11 caused by certain widget styles has been fixed (KDE Gear 25.04.3) Frameworks 6.15 also speeds up System Monitor by delaying tree view arrow loading There are still 3 high-priority Plasma bugs holding out, and the list of quick-win "15-minute bugs" has grown to 23.
    • Hasleo Backup Suite Free 5.4.2.0 by Razvan Serea Hasleo Backup Suite Free is a free Windows backup and restore software, which embeds backup, restore and cloning features, it is designed for Windows operating system users and can be used on both Windows PCs and Servers. The backup and restore feature of Hasleo Backup Suite can help you back up and restore the Windows operating systems, disks, partitions and files (folders) to protect the security of your Windows operating system and personal data. The cloning feature of Hasleo Backup Suite can help you migrate Windows to another disk, or easily upgrade a disk to an SSD or a larger capacity disk. System Backup & Restore / Disk/Partition Backup & Restore Backup Windows operating system and boot-related partitions, including user settings, drivers and applications installed in these partitions, which ensures that you can quickly restore your Windows operating system once it crashes. Viruses, power failure, or other unknown reasons may cause data loss, so it is a good habit to regularly back up the drive that stores important files, you can at least recover lost files from the backup image files in the event of a disaster. System Clone / Disk Clone / Partition Clone Migrate the Windows operating system from one disk to another SSD or larger disk without reinstalling Windows, applications and drivers. Clone entire disk to another disk and ensure that the contents of the source disk and the destination disk are exactly the same. Clone a partition completely to the specified location on the current disk or another disk and ensure that the data will not be changed. File Backup & Restore Back up specified files(folders) instead of the entire drive to another location to protect your data, so you can quickly restore files(folders) from the backup image files when needed. Incremental/Differential/Full Backup Different backup modes are supported, you can flexibly choose data protection schemes, which can improve backup performance and save storage space while ensuring data security. Delta Restore Delta restore uses advanced delta detection technology to check the changed blocks on the destination drive and restore only the changed blocks, so it has a faster restore speed than the traditional full restore. Universal Restore This feature can help us restore the Windows operating system to computers with different hardware and ensure that Windows can work normally without any hardware compatibility issues. Hasleo Backup Suite 5.4.2.0 changelog: Added backup image delete feature Added storage path management feature Improved file backup feature Show application notifications in Windows Notification Center Various other bug fixes and feature improvements Download: Hasleo Backup Suite 5.4.2.0 | 34.4 MB (Freeware) Links: Hasleo Backup Suite Website | Hasleo Backup Suite Guide | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      5i3zi1 earned a badge
      One Month Later
    • Week One Done
      5i3zi1 earned a badge
      Week One Done
    • Week One Done
      julien02 earned a badge
      Week One Done
    • One Year In
      Drewidian1 earned a badge
      One Year In
    • Explorer
      Case_f went up a rank
      Explorer
  • Popular Contributors

    1. 1
      +primortal
      545
    2. 2
      ATLien_0
      227
    3. 3
      +FloatingFatMan
      160
    4. 4
      Michael Scrip
      113
    5. 5
      +Edouard
      98
  • Tell a friend

    Love Neowin? Tell a friend!