Recommended Posts

Hey All,

Yup me again with some more network questions :stupid:

I have got myself a cisco switch (managed) i think it is a 2950 but i think i am wrong their could be a different model anyway anyone got any tips on configuring this?

I also have a dell precision T3400 i want to rack mount this does anyone know if this is possible? I have seen HP towers in a rack before (at work) if not could the contents of the T3400 be moved to a rackmount server chassis?

UPS does anyone know of a good Rack UPS?

Lastly does anyone have any links for cat5 faceplaces, patch panels & cat5 cables?

That is all i have for now

Thanks all

Rich

Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/
Share on other sites

I can help you configure the 2950 however you really need to tell us what exactly you want to do with it. I could get into vlans etc but that would be kind of pointless if you are not going to use em ;)

Your basic configuration would probably be something along the lines of setting the hostname and configuring vlan 1 as an administrative vlan with an ip address. (this way you can telnet). You could also setup SSH however I believe you will need the crypto featureset.

Can you post the contents of a Show Version from the switch?

Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/#findComment-590824056
Share on other sites

Monoprice is a good place to look for faceplates, cables, and patch panels. The Keystone plates and jacks are easy to work with.

http://www.monoprice.com/products/department.asp?c_id=105

Brilliant....i am going to have a look here now.

Does anyone know if the dell precision are standard atx and will they fit into a standard rack mount server chassis?

I can help you configure the 2950 however you really need to tell us what exactly you want to do with it. I could get into vlans etc but that would be kind of pointless if you are not going to use em ;)

Your basic configuration would probably be something along the lines of setting the hostname and configuring vlan 1 as an administrative vlan with an ip address. (this way you can telnet). You could also setup SSH however I believe you will need the crypto featureset.

Can you post the contents of a Show Version from the switch?

Sophism, we use Vlan's here and for what i want i really don't think that their is any need, i got this switch to learn on i was given no details about it what so ever so i don't even know how to connect to it. If i plug it in and connect it to my mac's network point can i configur eit like that?

I have knowledge of network's just not on this level, hence why i am trying to learn :) Thanks for your offer to help tho

Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/#findComment-590824060
Share on other sites

Your going to need to use the console cable that came with it to setup an IP, once it has an IP and HTTP is enabled you could use the SDM to configure it (web UI) if need be, or just normally you telnet or ssh to them.

But until you give it an IP, the only way to connect to it is with the console cable.. Sure a mac should work if it has a com port to use with the console cable, etc.

Until you configure it, its pretty much just a dumb switch -- it will pass traffic, etc. But not much else.

First thing you will see when you console is a wizard setting it up.. Have you bothered to even breeze over the documentation that came with it?? How is it you do not even know the exact model number??? :rolleyes:

Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/#findComment-590824226
Share on other sites

Your going to need to use the console cable that came with it to setup an IP, once it has an IP and HTTP is enabled you could use the SDM to configure it (web UI) if need be, or just normally you telnet or ssh to them.

But until you give it an IP, the only way to connect to it is with the console cable.. Sure a mac should work if it has a com port to use with the console cable, etc.

Until you configure it, its pretty much just a dumb switch -- it will pass traffic, etc. But not much else.

First thing you will see when you console is a wizard setting it up.. Have you bothered to even breeze over the documentation that came with it?? How is it you do not even know the exact model number??? :rolleyes:

Budman, i have a windows machine at home that has a serial port, can u buy console cables?

It is not a case of not being 'bothered' i dont have the documents i was given the switch through kind so i didnt purchase it, when i got it the switch was dead the PSU had died so i have repaired it and if i could fix it the switch was mine that is why i now have it.

It has already been configured for use elsewhere (before i got it) so i will need to reset it.

Oh and i didnt know the exact model number becuase at the time of posting the switch was not in front of me.

Rich

Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/#findComment-590824256
Share on other sites

You need to use a console cable and connect it to a serial port or a USB to serial adapter.

http://itknowledgeexchange.techtarget.com/...-console-cable/

and you will need one of these as well

http://www.usbgear.com/computer_cable_deta...06%2C1009%2C601

You then connect it to the CONSOLE port on the back of the switch.

On a Mac you can use Zterm which is free, or on a windows box you can use Hyperterminal. stop bits of 1, and flow control of none.

For the hyperterminal settings you will want to set a 9600 BAUD, 8 data bits, no parity,

With the default image there should not be a password. If there is I can post instructions on resetting that password.

By default you are in user exec mode, you have basic troubleshooting commands available but cannot really change anything.

type "enable" and hit enter and you are now in privileged exec mode. (this is like Root or Administrator)

type "conf t" to make changes to the currently running configuration. This is called global config mode.

These changes are not saved and if you restart they will be lost. TO save any changes to nvram you can type "Copy ru st", or type "wr". If you are in a line config or int config you can type "do wr".

To change the hostname of the device type "hostname "name""

To remotely manage the switch via telnet you can type the following commands

from global config:

line vty 0 15

password "password"

login

exit

then from global config type the following:

int vlan 1

ip add "set this to a reachable ip on your network" for example: "ip add 192.168.1.200 255.255.255.0"

By default all your switchports should be in vlan 1 so if you plug a computer up to switchport 1 and it is on the 192.168.1.0/24 network you should be able to telnet to this switch by opening Terminal and typing "Telnet 192.168.1.200"

lol I got roped into a quick meeting at work and budman beat me to it :p

Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/#findComment-590824260
Share on other sites

Okay this is all good, i have a console cable and connected it to the computer, i need to find out how to reset the switch back to factory defaults. It has a number of vlan's configured accross it and also has a password.

I appreciate the help, and i am trying to learn to please exuse me.

Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/#findComment-590824282
Share on other sites

Okay this is all good, i have a console cable and connected it to the computer, i need to find out how to reset the switch back to factory defaults. It has a number of vlan's configured accross it and also has a password.

I appreciate the help, and i am trying to learn to please exuse me.

You need to do a password recovery, follow procedure here - http://www.cisco.com/en/US/products/hw/swi...080094184.shtml

Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/#findComment-590824306
Share on other sites

Okay password reset :) I am now just trying to configure all the ports on the switch to vlan 1.

When you login and type enable do you then have to type conf t to be able to execute commands such as line vtr 0 15?

I get this error:

howell_sw050>enable

Password:

howell_sw050#conf t

Enter configuration commands, one per line. End with CNTL/Z.

howell_sw050(config)#line vtr 0 15

^

% Invalid input detected at '^' marker.

howell_sw050(config)#

Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/#findComment-590824476
Share on other sites

Okay i managed to get this working now - i followed all your steps and this is now what my vlan configuration looks like

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

Fa0/5, Fa0/6, Fa0/7, Fa0/8

Fa0/9, Fa0/10, Fa0/11, Fa0/12

Fa0/13, Fa0/14, Fa0/15, Fa0/16

Fa0/17, Fa0/18, Fa0/19, Fa0/20

Fa0/21, Fa0/22, Fa0/23, Fa0/24

Gi0/1, Gi0/2

Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/#findComment-590824548
Share on other sites

that is a VTY not VTR ;)

I noticed that - i must have cars on the brain or just extremely tired ha ha! Is this switch configured now? If i was to connect 24 cables from a patch panel to each onr of these ports would it work on the network?

Somehow i think i need to configure DHCP - i don't really want to leave this to my router, maybe a hardware firewall/router is required for this task,

Rich

Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/#findComment-590824598
Share on other sites

most any cisco switch/router can act as a dhcp server.

Again -- I would HIGHLY suggest you RTFM! ;)

If you do not have it handy - all the docs are available on cisco

http://www.cisco.com/en/US/docs/ios/12_2/i...de/1cfdhcp.html

Configuring DHCP

you would have to enter service mode.

Router(config)#service ?

alignment Control alignment correction and logging

compress-config Compress the nvram configuration file

config TFTP load config files

dhcp Enable DHCP server and relay agent

disable-ip-fast-frag Disable IP particle-based fast fragmentation

exec-callback Enable exec callback

exec-wait Delay EXEC startup on noisy lines

If you not comfortable with command line - you can configure the dhcp server using the SDM.

http://www.cisco.com/en/US/products/sw/secursw/ps5318/

But I would really suggest you lean the command line, SDM is fine for people that just need to do the basic stuff - but if you want to take full advantage of your switch you will need to use the command line.

edit: remember not to run more than 1 dhcp server on the same network ;)

Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/#findComment-590824944
Share on other sites

I have managed to finally figure out how to remove vlan's from the configuration, i have been trying to configure the switch as a DHCP server but i think i am going to leave this to the hands of pfsense to carry out.

Here is my curren vlan configuration, how do i know if each one of these ports is configured correctly now? Budman thanks for the links to the cisco documentation came in real handy but will take a few reads to get my head around.

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

Fa0/5, Fa0/6, Fa0/7, Fa0/8

Fa0/9, Fa0/10, Fa0/11, Fa0/12

Fa0/13, Fa0/14, Fa0/15, Fa0/16

Fa0/17, Fa0/18, Fa0/19, Fa0/20

Fa0/21, Fa0/22, Fa0/23, Fa0/24

Gi0/1, Gi0/2

1002 fddi-default act/unsup

1003 token-ring-default act/unsup

1004 fddinet-default act/unsup

1005 trnet-default act/unsup

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2

---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------

1 enet 100001 1500 - - - - - 0 0

1002 fddi 101002 1500 - - - - - 0 0

1003 tr 101003 1500 - - - - srb 0 0

1004 fdnet 101004 1500 - - 1 ieee - 0 0

1005 trnet 101005 1500 - - 1 ibm - 0 0

Remote SPAN VLANs

------------------------------------------------------------------------------

Primary Secondary Type Ports

------- --------- ----------------- ------------------------------------------

Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/#findComment-590829502
Share on other sites

what do you mean configured correctly? Its listed in the default vlan -- so all ports can talk to each other.. Do you mean for speed or duplex? what other configurations do you want to put on them? You would have to do that on the interfaces themselves.

Just take a look at the interfaces to view their settings, or take a look at your running config for other configurations that might be set, etc.

Again READ THE MANUAL!!!

http://www.cisco.com/en/US/docs/switches/l...de/scg_prf.html

The cisco site is LOADED with documentation.. You will want to make sure you are viewing info that pertains to your current IOS version though.

Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/#findComment-590829600
Share on other sites

what do you mean configured correctly? Its listed in the default vlan -- so all ports can talk to each other.. Do you mean for speed or duplex? what other configurations do you want to put on them? You would have to do that on the interfaces themselves.

Just take a look at the interfaces to view their settings, or take a look at your running config for other configurations that might be set, etc.

Again READ THE MANUAL!!!

http://www.cisco.com/en/US/docs/switches/l...de/scg_prf.html

The cisco site is LOADED with documentation.. You will want to make sure you are viewing info that pertains to your current IOS version though.

Dosent matter budman, i will leave my questions at that, i have read (reading) the documention i just wanted some help of people in the know but it dosent matter.

- Rich

Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/#findComment-590829650
Share on other sites

I would be more than happy to answer any specific questions you might have, but Im not a fan of spoon feeding info to people when the info is right at their fingertips.

have given you info on how to connect to it, and how to get to the dhcp server settings, etc.

What specific questions do you have?

"how do i know if each one of these ports is configured correctly now"

Is VAUGE at best.. Without knowing EXACTLY what your wanting to do - nobody can answer that question. To view the settings for a specific interface -- look at the interface, or look at the running config, look at the settings specific to each interface in the running config, etc.

What do you want to do on the interfaces?? Set speed, duplex? Access, Trunk Mode? Portfast? Etherchannel? What?

Again would be more than happy to help you with anything "specific" -- and you will clearly get more in depth info from the documentation than anyone's post. But once you have read how to do something - and its not working, or you would like clarification of how/why etc.. then yeah plenty of people in the know that can help you.

Sorry but "how do i know if each one of these ports is configured correctly now" is not really an answerable question.. If you state what you want to do on an interface, and then show us the config for the interface we could tell you if its correct or not.. But without KNOWING what your wanting to accomplish there is no way to tell you if its correct or not ;)

Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/#findComment-590830152
Share on other sites

Hey Budman,

Thanks again for your reply, i understand where your coming from and by no means am i asking to be 'spoon fed' just after a little bit of direction, all iwant to know is how do i make sure if the configuration i have now completed is going to work when i plug something into it. Is the easy answer try it?

Sorry about my vauge post.

Richard

Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/#findComment-590830216
Share on other sites

By default all ports are going to be in vlan 1, by default all ports will forward traffic - cisco switches are designed to be plug and play.. by default they will be auto speed and duplex, etc. You don't really have to configure anything for them to be used as a switch. Now that would not be very useful for people shelling out the cash for a fully managed switch ;) But hey out of the box they will function - and nothing "has to" really be configured. Only when you want to start using some of the "managed" features do you have to actual start to configure them -- or if maybe you run into an issue where auto speed and duplex dont work, or you want to set an interface to a specific speed or duplex for your needs, etc ;)

Sure if there was some configuration on the switch before you got it, its possible there might be some settings that could cause you issues. Viewing the running config would show you all the settings, and from there you could determine if some of them might cause you problem. If you want just reset it to factory and all previous settings would be gone at it would be like you got it brand new -- you mentioned you went thru the password reset procedure.

Did you reset it to factory?

http://www.cisco.com/en/US/products/hw/swi...0800c4546.shtml

Resetting Catalyst Switches to Factory Defaults

If your unsure of anything -- you might want to do this.. This way your sure you have a clean slate config to work with.

If you have any "specific" questions -- always glad to help.. Or even general "switching" technology questions, ie what is a vlan, what is stp, etc.. happy to help! But please at least do some research on the topic before asking the questions ;) heheh

Edited by BudMan
Link to comment
https://www.neowin.net/forum/topic/757034-network-advice/#findComment-590830392
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Trailer park trash “sport “, fits the current White House
    • KataLib 5.3.0.0 by Razvan Serea KataLib is more than just a music player — it's a complete audio suite designed for music lovers and creators alike. It combines a powerful audio player, a flexible metadata editor, a capable audio converter, and a music library manager into one streamlined application. Core Features: Audio Player Enjoy seamless playback of virtually any audio format or even streaming video files. DJ Mode lets you mix tracks with manual or automatic crossfades. You can also load and save WinAmp-style playlists for quick access to your favorite sets. Audio Converter Convert between a wide range of audio formats effortlessly. Trim or normalize your output automatically, and even extract audio from streaming video sources. Ideal for preparing files for different devices or platforms. Metadata Editor View and edit ID3v2 tags and other metadata. Batch edit multiple files at once, and fetch missing information directly from the MusicBrainz database. You can also apply or update album art with ease. Music Library Manager Organize your entire audio collection, search across tracks instantly, and download cover images from the internet — or use your own custom artwork. KataLib makes it easy to keep your library tidy and enriched with useful info. Supported Formats: KataLib supports a wide range of both lossy and lossless audio formats: Input: OPUS, AAC, FLAC, M4A, MP3, MP4, MPC, APE, AIF, MKV, AVI, MOV, FLV, WEBM, Ogg Vorbis, WAV, WAVPack, WMA, AC3, OGA, MP2, MPGA, MPEG, DTS, M4B, DSD (DFS) Output: OPUS, FLAC, M4A, MP3, Ogg Vorbis, WAV Under the hood, KataLib uses the trusted FFmpeg engine for audio conversion and media playback, ensuring compatibility with virtually all mainstream media formats. KataLib 5.3.0.0 changelog: Added Option to select the Zoom level of the Oscilloscope visualizer. The taskbar button of the app now displays the progress of its processing tasks. The metadata text of the Visualization Video can now be aligned by the user. We can now reorder the order of the Visualizers and Metadata, in the Visualization Video Setup dialog, by removing any item and adding it again. It will be added at the end. Changed The font size of the Visualization Video can now be more than 30 points. Updated yt-dlp library to version 2026... Fixed Opening the Visualization Video Setup dialog could fail if the settings were wrong. Sometimes there were false duplicates in the Rename Tracks dialog. Tracks without metadata appeared without title in the Recent menu. Download: KataLib 5.3.0.0 | 90.0 MB (Open Source) Links: KataLib Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • EA Sports UFC 6 review: Brutal, satisfying, and surprisingly accessible to newcomers by Pulasthi Ariyasinghe EA’s UFC series of fighting games has been putting out games for over 10 years now, but it’s a series I have never spent any time with. As a PC guy, the series being console-exclusive is the primary reason for that. The latest entry to the series, EA Sports UFC 6, is still not coming to PC, but I have an Xbox now. When EA reached out to see if I could have a crack at the game and give my opinion about it, I finally got the chance to see what this franchise is about. I have spent about a week playing UFC 6 on the Xbox Series X. Despite my lackluster skill with fighting games, I still have fun with entries like Street Fighter and Tekken. I quickly came to realize this is a different kind of fighting game, not the arcade titles I am usually dabbling with. Most of the week that I spent playing UFC 6 was in the career mode, trying not to get knocked out while slowly improving my combos and reactions. The review below will be from the perspective of a newcomer to the series and an amateur fighting game fan, so please forgive any mistyped lingo or series-staple mechanics I am not comprehending. In the Ring Getting a solid hit in UFC 6 is satisfying. It’s probably the most satisfying impact reaction I have seen in a fighting game. The ripples in the muscles, the spray of sweat (and blood), the meaty sound, and the subsequent stumble all carry a lot of weight. If I miss a heavy swing like that, though, I already know that I'm in for a world of hurt from the incoming counters. The fighting is a real treat. The actions aren’t as snappy as arcade titles, so a miss feels like a much bigger mistake here. This slowness did take some getting used to, but I felt the improvement in my abilities even after a few drills with basic punch and kick combos. If I’m not deliberate with my actions in the ring, whether it be a hasty retreat or a flying punch, the possibility of getting instantly knocked out is always there. The head, chest, and legs all come with their own health bars, so guarding just one area is just asking for trouble. A few hits to the head, and it's game over. Meanwhile, you won’t even be able to stay on your feet if they get damaged enough, drastically lowering the total amount of stamina available for the rest of the match. I was also encountering a large range of fighting styles to customize my own fighter with. There are a huge number of real-life superstars here from multiple eras. It’s not as exaggerated as Street Fighter or Tekken, but the way they move, evade, throw punches, or even take steps is based on their real-life counterparts. I can see this being a big draw for any mixed martial arts fan. One feature I was surprised to see here was the 'Flow State' ability. As rounds progress, a power-up meter can give a temporary boost to the unique fighting style of the selected fighter, essentially boosting what they are good at. There is an entire visual effect that kicks in when activating this, too. The surprising part was seeing something like this in a game that feels like it’s aiming to be more of a simulator than an arcade fighter. My skill level is too low to use this exactly how the game wants me to, so I ended up triggering it whenever the opponent did it as well. Streamlined vs Authentic When I first started it up, UFC 6 asked me about my experience with the series. Being genuinely new, I took its advice and opted for a lowered difficulty level and 'Streamlined' controls. Quickly, I realized that this wasn’t for me. My chosen fighters were throwing random attacks, no matter what combination the game was trying to teach me. Win streaks were happening, and I was already getting bored out of my mind just a few matches in. Turning off this mode and switching to 'Authentic' controls fixed everything right up. I was now able to control my fighter with more precision than I expected. I could control each arm and leg, which body part my attacks would aim at, and the fully customizable controls for setting up unorthodox moves were a cherry on top. None of these made me an expert at the game, but at least I was being beaten up fairly. This is not a point against UFC 6, though. Giving the option for anyone to enjoy the game is always a good thing in my eyes. There is a lot of customizability in the difficulty, with everything from slow-motion reactions to specific assists being offered as toggles. If I had a friend coming over and wanted to try a quick 1v1, the streamlined controls option is one I’d consider to make it a light and fun fight. The one part of the fighting that did not click with me was the grappling. Being taken to the ground brings in an entirely new control mechanism involving mounts and submissions that feel more like quick-time events than the heavy, tactical fighting I had seen so far while standing. The game wants me to hold sticks in certain directions to change the position or pull off submissions, trying to do the opposite actions of the opponent. Even though I tried to get used to this gameplay, it just felt like a momentum killer, and I eventually just wanted to get back on my feet to get back into the action. Legacy and Career It was UFC 6’s career mode that I wanted to play the most when I started it up. I grew up with EA Sports games, and taking my team from the ground to the top has always been my favorite task. UFC 6 has that same option but also offers a more cinematic entrance to the career experience than I expected with ‘The Legacy’ mode. This mini-campaign follows an up-and-coming fighter, Chris Carter, who is attempting to reach the heights his father had reached in the sport. Starting with a small-time gym and coach, the story follows both his growth in the space as well as the growing rivalry with a friend and fighter, Danny Lopez. The fights in this mode are very good at introducing a newcomer like me to the sport and its varying techniques. Cinematics land between the major fights, showing the growing tension between the two fighters as the years go by, feeling the pressure to not miss out on the hard-earned chances. The dialogue can be a little corny at times, especially when the bar fights kick off, but I largely enjoyed the storyline. At the end of it, I was pretty much familiar with all the mechanics of the career mode, unlocking new skills and moves, and how I needed to approach fights, both outside and inside the ring. This story mode isn’t a very lengthy one, so don’t expect an hour-long campaign. Once the conclusion is reached, Carter’s journey continues as if it’s a normal career playthrough, though I decided to start over from scratch now that I have some know-how about the basics. The career mode is very streamlined, which is to be expected considering there isn’t a team to manage like in other EA Sports games. It’s the journey of one fighter. When a fight comes up in the calendar, I could choose how many weeks I dedicate to preparing for it at the gym. A longer prep time gives the opportunity to get my fighter’s fitness up (giving a bonus during fights), earn more money and points for unlocking new skills, and gain more fans to fast-track the rise to stardom. While that sounds like a lot of things to manage, it’s more like a few clicks. There is a social media menu that sometimes pops up with canned replies I can send to fans, and the sponsors are once again a single click away from being assigned as finished. It’s the training aspect that adds a gameplay angle. Using the money from winnings and sponsorships, I was hiring different types of trainers and learning fancier moves to use in the ring. One small thing I appreciated was that it was possible to injure each other during these training sessions. If a trainer goes down in a bad way while sparring, they won’t be available for the remainder of training. If my fighter is injured, it takes valuable time and resources to heal and recuperate. Just like in real life, it makes sense not to go so hard during training sessions and save that energy for the main event. Every training or sponsorship activity I took part in used up the days and weeks I had before the next fight, bringing a balancing element to the whole ordeal. There were times I simulated most of these to just get to the next fight, but the grind for gaining even the slightest bit of advantage while trying not to overdo it is an enjoyable one. Outside of quick fights and career modes, UFC 6 also introduces an almost museum-like mode to explore a trio of fighters considered to be legends of the sport: Max Holloway, Alex Pereira, and Zhang Weili. The aptly named Hall of Legends mode is unlike everything else seen in the game. Each of these fighters has entire levels dedicated to them that I could walk around in and explore their journey into the UFC. This includes footage from real-life fights and interviews about their original inspirations and training methods. Each of these spaces is almost like an interactive documentary. Once the highlights are done, the mode offers the opportunity to take over a deciding fight from the superstars. It’s an impressive transition. Going from the real-life televised event with crowds and commentary to immediately taking over in the game has some real hype behind it. Performance and visuals It’s clear to see that UFC 6 is going for a photo-realism look with its visuals compared to any other fighting game. The fighters don’t look great in selection screens. But inside the arenas, under the flood lights, surrounded by crowds, and facing an opponent, the visuals are more than impressive. As ghastly as it is to witness, things like blood spraying into the mat and muscles reddening as they get pummeled keep improving the immersion. The fluid animations help sell the illusion even further. A missed kick carries the momentum to require a corrective step. Hard punches that glance off blocks give off the air of a hit that still took some wind off the opponent’s guard. The special moves with flips and spins look mega awkward when missing, just as they do in real life. Suffice to say, the Frostbite Engine powering this game is one of the biggest strengths of EA development studios. Playing on the Xbox Series X, the 60 FPS gameplay did not miss the mark or cause any slowdowns that I could detect. I still wish this series were on PC to see just how far the developer can push the engine. One area I continue to have issues with, surprisingly enough, is the menus. The game has fast loading screens, but almost every menu I click through has a large amount of noticeable lag before it registers. This is immensely painful in the career mode, since I have to go through multiple menus between fights to train and do sponsorships, and having a 3-second pause when selecting a simple move between pages is the only time that made me quit the game. Thanks to Xbox’s quick resume, though, I was able to instantly jump back in the next day to the same point (and wade through more laggy menus). Conclusion My primary mission going into this EA Sports UFC 6 review as a newcomer to the series was to find out if this is a good jumping-in point for someone like me. Suffice it to say, the game passed that test with flying colors. Despite the high skill ceiling, the legacy mode introduction campaign, multiple types of accessible controls, and streamlined career had me picking up the basics and fighting styles much faster than I expected. I wish I had gotten to try out competitive multiplayer during my time with the game, too, but the lack of players in the pre-release version prevented this. The impressive visuals and animations, coupled with the impact physics that let me feel every punch and kick easily, made this the most immersive fighting game I have played. The only part that gave me pause was the grappling gameplay, which killed the momentum in most fights. The Flow State amplifying system didn’t hamper the experience, but I also felt like it made more sense for an arcade fighter, not this. Easily the most annoying thing about UFC 6 was its laggy menus, which I hope get some sort of fix later. Returning series veterans might have a completely different experience from me. But for a new fan like me looking to climb ranks and see fighters get floored in spectacular ways, UFC 6 doesn’t miss a step. EA Sports UFC 6 is releasing on June 19 across Xbox Series X|S and PlayStation 5 for $69.99. Ultimate Edition owners can already jump in via advanced access. This review was conducted on the Xbox Series X version of the game provided by EA.
    • No, Microsoft is obviously just spending money on maintaining a product with 0 users.
  • Recent Achievements

    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
    • Rookie
      Rimplesnort went up a rank
      Rookie
    • One Year In
      Markus94287 earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      486
    2. 2
      +Edouard
      173
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      94
    5. 5
      Steven P.
      79
  • Tell a friend

    Love Neowin? Tell a friend!