[HELP] Cant install ANY repositories or programs


Recommended Posts

also, whenever i look at any program in the add/remove window it always says

Atlantik Designer cannot be installed on your computer type (i386). Either the application requires special hardware features or the vendor decided to not support your computer type.

Amarok cannot be installed on your computer type (i386). Either the application requires special hardware features or the vendor decided to not support your computer type.

ect ect

I think I know why based on what is on this page-- it may be time to update your version-

http://packages.medibuntu.org/

Mediabuntu

# 2008-10-19

Removed feisty.

and Packages the Ubuntu update site news says

2009-02-21

Remove feisty.

http://packages.ubuntu.com/

You could try this page=

http://www.howtogeek.com/howto/linux/upgra...eisty-to-gutsy/

Then once you are in gutsy- you could get all the updates for gutsy and then upgrade again to Hardy though that one I believe the command is

update-manager -d

and that will bring more in line with the supported line of releases.

and yes you do have to go from Feisty to Gutsy and then to Hardy. No Cutting inbetween unless you download the Hardy burn the Cd and install over your Feisty.

went to the site, followed the directions, ran

gksu "update-manager -c "

and it opened a window, tried to download 68 files, got the 404 error. it said 7.10 update is avalible on a button, i click it, it tries to download 2 files, does NOT give an error, and then it just sits there.

thank you for being helpful, i dont mean to sound ungratful or incompetent. ive just been messing with this for days now, went to linux because windows crashed and burned, gave me a bad bios checksum error.

nah. this install is all of a day old. id do a clean install, but i dont know how to setup a torrent to download an iso of the newer version, how to burn it to a disc in linux, how to install the program i NEED to burn it to a disc, where to GET the program to burn it to a disc, and if i knew how and where then there is a good chance it wont LET me because im on feisty.

went to the site, followed the directions, ran
gksu "update-manager -c "

and it opened a window, tried to download 68 files, got the 404 error. it said 7.10 update is avalible on a button, i click it, it tries to download 2 files, does NOT give an error, and then it just sits there.

thank you for being helpful, i dont mean to sound ungratful or incompetent. ive just been messing with this for days now, went to linux because windows crashed and burned, gave me a bad bios checksum error.

nah. this install is all of a day old. id do a clean install, but i dont know how to setup a torrent to download an iso of the newer version, how to burn it to a disc in linux, how to install the program i NEED to burn it to a disc, where to GET the program to burn it to a disc, and if i knew how and where then there is a good chance it wont LET me because im on feisty.

You can download 8.1 Ubuntu without bothing to deal with torrents by going here:

http://www.ubuntu.com/getubuntu/download

If you don't have K3B or something to that effect then you can burn an ISO from the command line:

http://www.ibm.com/developerworks/linux/li...y/l-cdburn.html

Or you can download the image from the above site to a Windows/Mac computer and burn the CD from that computer.

an iso from command line is way beyond my technical skill level, just by looking at it.

i can copy and paste commands, but i cant comprehend anything its telling me on that tutorial. i dont have k3b and dont know names of other possible burning programs.

im downloading the iso now, but its going to take all night.

burning a cd on a diff pc is not a option for me. wish it was.

I should think you have dpkg? If so you can download a .deb of a CD burning package and use dpkg --instal meme.deb or you could download the source and compile it..

Providing you have the dependencys it shouldnt be too much trouble to do :)

I should think you have dpkg? If so you can download a .deb of a CD burning package and use dpkg --instal meme.deb or you could download the source and compile it..

Providing you have the dependencys it shouldnt be too much trouble to do :)

not sure what dpkg is, but its not in the "start bar" or whatever you call the lil ubuntu icon in the top left. and i cant install anything at all. vanilla feisty fawn

I think feisty default install came with gnomebaker

http://ubuntuguide.org/wiki/Ubuntu:Feisty/CDDVDBurning

So I think the burning part is already there and that guide shows nothing that needs to download from the web to burn.

I think I ran feisty for a few weeks then Dapper came out and I updated ... then went all windows for a while and now back for Hardy (also ran Intrepid) waiting on Jaunty to finish beta before I install it.

if it came with gnomebreaker then howcome it dont show in the start menu?

hopefully it burns easily enough. according to that site all i gotta do for an iso is rightclick>burn to cd - like its really gonna be that simple - got the image downloading right now eta 6hrs. its going at 25k a sec, wish it would speed up.

ty for the help redvamp. ive got the download going and found the cd burner in feisty. its one menu over under places. lol

when its done ill just burn and switch, ill be back if i have the same problem on 8.10 (whats its name?) ty ty ty

if neowin had a rep system youd get major +

Actually why not try the alternate install cd-- where it will download the packages it needs only... and is small

http://releases.ubuntu.com/intrepid/

Just make sure that after you run this the internet is connected... it will download the latest packages...

http://releases.ubuntu.com/intrepid/ubuntu...ernate-i386.iso

It is much smaller than the normal cd.

Will boot to a prompt to install-

Type

CLI

Which means Command Line Install.

and if you should have issues connecting -

reboot with cd and type

sudo ifup eth0 (or eth1) and it should connect.

then type

ifconfig

if it has an Ip address then type your

CLI

This method does take a little longer but it does install the latest packages and downloads the packages in bursts.

As far as a good site-- I would say https://help.ubuntu.com/community/UsingTheTerminal

And above there is a link to the community online documentation.

Edited by redvamp128
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • FotoSketcher Studio 4.30 by Razvan Serea FotoSketcher Studio is a free creative tool that instantly turns your photos into artwork. With just a few clicks, you can apply styles like pencil sketches, watercolor, oil painting, ink drawings, cartoons, and abstract effects. Powerful yet simple sliders let you adjust every detail to match your vision, from subtle enhancements to bold artistic transformations. You can also improve your images with tools for contrast, sharpness, color, and brightness, plus add frames and text. It supports JPEG, PNG (including transparency), BMP, and WebP formats for both opening and exporting. Available for Windows (64-bit) and macOS (Apple Silicon and Intel), FotoSketcher also offers batch processing, manual retouching, and custom effects for advanced users. Completely free, including commercial use, with no ads or spyware. FotoSketcher Studio 4.30 changelog: New LUTs effect In the Photo Lab category you will find a new LUTs (Lookup Tables) effect for custom colour grading. It comes with 18 presets built right into the application (Cinematic, Kodachrome, Golden hour, Portrait and more), each with a live preview so you can see the look before applying it. Right-click the preview to compare with your original image. And if you have your own .cube files, you can load those from disk too. New "Stylize" category Added a brand-new Stylize category with four new effects. Three of them (Mosaic, Circles and Triangles) are built on the same space-filling idea, turning your photo into tiled mosaics, clusters of circles, or a low-poly triangle look. The fourth, Cartoon, is a bit different: it gives a clean graphic style with defined lines and solid colours. A little tip - set the colour intensity to 0 and Cartoon draws a pure outline drawing with no fill. Combined with the "Do not erase background" option, you can run it on top of any other effect to add crisp contours in two quick steps. Auto-Enhance and Full Reset Two small but handy additions. Auto-Enhance (just press E) tries to optimise your source photo - exposure, white balance, local contrast - for a 'dehazed', natural-looking starting point. And Full Reset clears everything back to a clean slate in one step (working image, history, LUT, script, brushes and sliders) without having to close and reopen the program. Press Ctrl+Shift+N, or right-click the exit button. Scripts The script engine has been updated to support all the new effects, with a few new commands and improved help. If you would like some inspiration, the recent scripting tutorial on this blog walks through several ready-made example scripts. The usual improvements The interface now uses new colour accents for better readability, the history gallery has had a few tweaks, and you can now open .webp images directly. On top of that, this release includes some performance improvements and a good number of bug fixes. Download: FotoSketcher Studio 4.30 | 55.9 MB (Freeware) Download: FotoSketcher Studio for macOS | 119.0 MB View: FotoSketcher Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I have a Motorola, one of the lower end ones, it works fine. It is possible to get rid of the Gemini app and also to disable googles assistant , but A.i is still apps. I try to avoid all LLM A.I, is i can, I use no Ai duck duck go.
  • Recent Achievements

    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      519
    2. 2
      +Edouard
      189
    3. 3
      PsYcHoKiLLa
      87
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      72
  • Tell a friend

    Love Neowin? Tell a friend!