Power consumption with high CPU usage


Recommended Posts

I was wondering what difference there is between a typical desktop computer that uses a lot of CPU for number crunching compared to a computer that runs less intensive activities.

Would a desktop that averages 10% CPU usage use significantly less power than an idential desktop that averages 90% or would they both use roughly the same amount of power? I have tried to look up rough figures of power consumption versus CPU usage for a typical desktop PC but had no luck. Any ideas?

You will notice a difference in energy usage, I did when I was running the F@H Client, whilst running the client I used significantly more energy and ultimately had to stop because I couldn't afford to run it. Sorry but I can't give you any figures :(

Yes, a desktop that averages 10% CPU usage would use less power than a desktop that averages 90% CPU usage. It depends on what kind of application we're talking about. If we're talking about gaming, and the CPU usage is pretty high, you have to figure in the graphics card is also drawing a lot of power too (graphics cards draw more power when under load compared to idle), so therefore the total system is using more energy than say if it was just browsing the web.

If you're worried about power consumption, you can look into the Intel Atom, Via processors, and AMD also has some low wattage processors. Again, it depends on what apps you're trying to run. If you're just browsing the web, doing office documents, then a Atom processor should be fine.

  hjf288 said:
With my comp idle according to Gigabyte Energy Saving Tool my CPU uses about 6.9 - 7 Watts.

At 83% CPU Usage it rises to about 32Watts

Wow that seems pretty low considering a Intel Core 2 Duo has a tdp of 45W and the Quads and Core i7 are 90W+, not sure of the exact figure.

TDP and usage have nothing to do with one another but are related one is heat the other amount of power being used

http://en.wikipedia.org/wiki/Thermal_Design_Power

read that and you'll get a little better understanding of what i said

You will always have some kind of difference between low and high CPU usage, but how big the difference is depends on the CPU. For example a power hungry CPU like a Pentium 4 would have a larger power usage difference between low and high load than say for example a 45nm Core 2 Duo.

  GrimReeper said:
Wow that seems pretty low considering a Intel Core 2 Duo has a tdp of 45W and the Quads and Core i7 are 90W+, not sure of the exact figure.

Most C2Ds actually have a TDP of about 65 watts, and the quads about 100-110w at stock clocks.

  hjf288 said:
With my comp idle according to Gigabyte Energy Saving Tool my CPU uses about 6.9 - 7 Watts.

At 83% CPU Usage it rises to about 32Watts

Doesn't make sense because if that were the case you could run your computer on a 150W PSU 'cause 32W at 83% load would give you less than 25% load on your PSU...

  Frank Fontaine said:
You will always have some kind of difference between low and high CPU usage, but how big the difference is depends on the CPU. For example a power hungry CPU like a Pentium 4 would have a larger power usage difference between low and high load than say for example a 45nm Core 2 Duo.

Most C2Ds actually have a TDP of about 65 watts, and the quads about 100-110w at stock clocks.

95W for 45nm variants, as well as G0 Revision Q6600m 105W for B3 revision ;)

  Atlonite said:
TDP and usage have nothing to do with one another but are related one is heat the other amount of power being used

http://en.wikipedia.org/wiki/Thermal_Design_Power

read that and you'll get a little better understanding of what i said

I didn't realize. Thanks for the heads up :) I've never used tdp for measuring power usage I always used it to determine what to buy so I could use passive heat sinks without frying things haha :p I just assumed it was related but I was wrong :(

  shift. said:
Doesn't make sense because if that were the case you could run your computer on a 150W PSU 'cause 32W at 83% load would give you less than 25% load on your PSU...

95W for 45nm variants, as well as G0 Revision Q6600m 105W for B3 revision ;)

Without a meter i cant really check but thats what the gigabyte tool says, Processor is Q6600 undervolted.

  Atlonite said:
TDP and usage have nothing to do with one another but are related one is heat the other amount of power being used

http://en.wikipedia.org/wiki/Thermal_Design_Power

read that and you'll get a little better understanding of what i said

Actually, they are relatively close in fact.

http://en.wikipedia.org/wiki/CPU_power_dissipation

"Some CPUs (i.E. newer Intel-CPUs) have the typical power consumption defined as TDP and some (like CPUs from AMD) have the maximum power consumption defined as TDP."

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Does anyone who thinks this will work want to buy a bridge? Several for sale and an island.
    • That is the "rated" capacity. I owned one myself and had 3 x 20TB Seagate Exos X22 in it, ut I will update it to say not included. The other point is, yes you can go cheaper, but in my experience DSM is miles ahead of the competition if you can excuse the constant omission of features over the last couple of years, such as Synology dropping H.265 support in DSM 7.2 as one example, and the compatibility lockdowns.
    • PornHub commits to age checks for UK users by 25 July by Paul Hill Ofcom, the UK’s digital regulator, has announced that PornHub and several other porn sites have agreed to put robust age checks in place by the deadline next month on 25 July. The confirmations to Ofcom will likely be used by the regulator against the companies if they fail to comply by the deadline as justification for a fine. The companies that have publicly stated they’re going to have safeguards in place by the deadline are PornHub, BoyfriendTV, Cam4, FrolicMe, inxxx, Jerkmate, LiveHDCams, MyDirtyHobby, RedTube, Streamate, Stripchat, Tube8, and YouPorn. There may be other companies that are preparing, these are just the ones that were happy to be named. Ofcom has been given the task of making sure porn sites comply with age check rules. If companies don’t follow the rules, Ofcom has the power to impose fines and even apply for a court order to ban websites or apps from being available in the UK. These rules are part of the wider Online Safety Act, which aims, in part, to keep children safe online. So far, it has launched investigations into four porn providers for failing to comply with its requests. Oliver Griffiths, Ofcom Group Director of Online Safety said: “Society has long protected youngsters from products that aren’t suitable for them, from alcohol to smoking or gambling. But for too long children have been only a click away from harmful pornography online. “Now, change is happening. These age checks will bring pornography into line with how we treat adult services in the real world, without compromising access and privacy for over-18s.” The new age verification methods come in various shapes and sizes (pun intended) including credit card checks, open banking, and facial age estimation. While these may not keep all kids from accessing porn, they’ll act as a significant hurdle. For adults concerned about handing over information to access porn sites, Ofcom said that the measures do not harm your privacy. All of the age assurance methods are subject to the requirements of UK privacy laws, including on processing personal data. The Information Commissioner’s Office (ICO) is overseeing this area to ensure companies comply. Ofcom’s own studies have found that 3% of 8-9 year-olds have been exposed to online pornography at some point. This highlights how easy it is to find this content and clearly something has to be done. It’ll be interesting to see how these measures actually play out when they get rolled out.
    • Looks like MS is officially extending Windows 10 support while stopping just short of officially changing the end date. I teased in the last article that the process for gaining free support was a little invasive, but this is basically just giving it out for free, so I guess I'm taking back those words.
    • Microsoft shares Windows 10 ESU key guide for office PCs that don't support Windows 11 by Sayan Sen Recently, the Indian government issued a caution about the upcoming end of support for Windows 10 which is about four months away. Interestingly, on that very day, Microsoft made a major announcement regarding this as the tech giant debuted free enrollment options wherein support would be extended for another year at no extra cost. Microsoft is also trying to make it easy to set up Extended Security Updates (ESU) with a new tool. You can see in the image below: New ESU enroll wizard Following that, today, the company has shared a new guide on how to activate ESU via Intune in the case of Windows 10 office PCs that are not supported on Windows 11. First up, Microsoft has reminded users of the prerequisites of Windows 10 ESU: The system needs to be on Windows 10 22H2 with KB5046613 (November 2024 Patch Tuesday) or newer. The device needs access to the network endpoints required for client activation. The process that is used for activation needs administrative privileges on the device. The guide contains several PowerShell scripts and are meant for IT admins and system admins. One of those is a validation script "Check-Win10ESUPrereq.ps1" that Microsoft has published to help "verify a device has the required version and patch level for Windows and it can communicate to the required network endpoints." Essentially, it checks if the aforementioned requirements are satisfied and can be used for troubleshooting against those prerequisites. After the "validation," Microsoft says there are two ways to proceed with the ESU key activation. First. it can be done by either Remediation through: Detection Script (Win10ESUActivation-detect.ps1) and Remediation Script (Win10ESUActivation-remediate.ps1). And second, by Win32 Application with Win32 Install Script (Win10ESU-install.ps1) and Win32 Detection Script (Win10ESU-detection.ps1). In the case of Remediations, Microsoft mentions "some licensing considerations" due to which "some smaller companies may not have that option." Finally, Microsoft has also shared some Activation IDs for manual verification via Slmgr VB script for obtaining volume activation information: Win10 ESU Year1: f520e45e-7413-4a34-a497-d2765967d094 Win10 ESU Year2: 1043add5-23b1-4afb-9a0f-64343c8f3f8d Win10 ESU Year3: 83d49986-add3-41d7-ba33-87c7bfb5c0fb You can check the full guide and the details here on Microsoft's official Tech Community website.
  • Recent Achievements

    • Conversation Starter
      Kavin25 earned a badge
      Conversation Starter
    • One Month Later
      Leonard grant earned a badge
      One Month Later
    • Week One Done
      pcdoctorsnet earned a badge
      Week One Done
    • Rising Star
      Phillip0web went up a rank
      Rising Star
    • One Month Later
      Epaminombas earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      529
    2. 2
      ATLien_0
      207
    3. 3
      +FloatingFatMan
      169
    4. 4
      Michael Scrip
      149
    5. 5
      Steven P.
      124
  • Tell a friend

    Love Neowin? Tell a friend!