Okay, so what now?


Recommended Posts

i originally asked about the 970 chip and when it would be on sale and was told that it probably wouldn't be out til next year at the earliest. well now the MacRumors site is saying that they will be available in june. should i wait a month and see if they will come out or should i go ahead and get the dual 1.42 powermac?

Link to comment
https://www.neowin.net/forum/topic/77036-okay-so-what-now/
Share on other sites

I dunno. I'd be fairly split on the issue too, but to be honest, I think now is an ok time to buy. Sure, you might be outdated in just a few months (probably more like half a year, though), but I think not having a mac all that time wouldn't be as fun :)

Plus, it's not like the machine you're looking at will be a slow box when the 970's come around. It just won't be the fastest :)

Link to comment
https://www.neowin.net/forum/topic/77036-okay-so-what-now/#findComment-832035
Share on other sites

even if you can get it in june, it probablly will be SLOWER than a g4 right now, because so many things are optimized in 10.2 just for the g4.

10.3 will most likely have a ton of support and optimizations for the 970s. the first generation adopters of the new chips, whenever that may be, will most likely see no improvement over a DP g4 machine.

if you need a good, stable machine in the next 6 months, get a g4. if you can hold off till the end of the year or so, wait for the 970s.

Link to comment
https://www.neowin.net/forum/topic/77036-okay-so-what-now/#findComment-832170
Share on other sites

well here's my dilemma:

i am going to upgrade my PC to an uber-PC around Q3-Q4 of 2004 and you know how much that will cost. i would like to have at least a year to save up that money so that's why i want the mac now. however, if all i have to wait is a month or so to get a new gen mac then i'll wait. if i gotta wait til november-december for one i'll get one now.

so what do you guys think?

Link to comment
https://www.neowin.net/forum/topic/77036-okay-so-what-now/#findComment-832210
Share on other sites

making your pc uber eh? that won't cost you more than $1000. unless you're buying things like monitors.

start saving your money now. it's not going to make a difference when you buy your mac if you are just saving more and more money. personally, from now on, if i want a mac product, i'm going to wait until they release the next update to the line before i buy. i probably would have gotten a 17" pbook if i had done this recently. oh well

Link to comment
https://www.neowin.net/forum/topic/77036-okay-so-what-now/#findComment-832391
Share on other sites

i doubt they'll SHIP in june. my guess is they'll announce the new 970s in the high end powermacs and xserves, and they will most likely ship when 10.3 comes out. just a guess, but that seems to be how apple does things nowadays with releases. build the hype for the new item before it's done, then ship it out later when it's actually ready..

Link to comment
https://www.neowin.net/forum/topic/77036-okay-so-what-now/#findComment-832450
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Wow, Microsoft IS cooking lately... This only shows that they COULD improve, they just chose not to for whatever reasons. That obsession with AI was destroying them from the inside out.
    • BATorrent 4.1.0 by Razvan Serea BATorrent is a lightweight, open-source BitTorrent client built with modern C++ and Qt 6, offering a clean, fast, and privacy-focused alternative to traditional torrent apps. It supports magnet links, .torrent files, resume data, sequential downloading, per-file priorities, and even imports from qBittorrent. Power users benefit from integrated RSS auto-download with regex filtering, duplicate detection, and automatic tracker lists from Stremio. Streaming is seamless thanks to auto-detected players like VLC and IINA. BATorrent includes robust VPN tools—interface binding, auto-detection for WireGuard-based services like Mullvad and NordLynx, kill switch, proxy support, and IP filtering. A full WebUI enables remote control, while integrations with Plex, Jellyfin, and Emby automate library updates. With themes, speed scheduling, system-tray alerts, and cross-platform support for Windows, Linux, and macOS, BATorrent delivers a polished, high-performance torrenting experience. BATorrent features: Core .torrent file and magnet link support Resume data — picks up where you left off after restart Import torrents from qBittorrent Create .torrent files from any file or folder Sequential download mode Per-file priority control (skip, low, normal, high) Seed ratio limits with auto-pause DHT, PEX, UPnP, NAT-PMP RSS Auto-Download Subscribe to RSS feeds — automatically download new torrents as they appear Regex filters — match only what you want (e.g. 1080p|720p, S01E\d+) Per-feed settings — custom save path, check interval (5–1440 min), enable/disable Auto-download — matched items are downloaded automatically in the background Supports magnet links, .torrent URLs, and tags Tray notifications when items are auto-downloaded Duplicate detection — never downloads the same item twice Stremio Stremio Addon System pre-installed — works out of the box Auto tracker list from ngosang/trackerslist Streaming Play while downloading — stream video files before the download is complete Supports mp4, mkv, avi, mov, wmv, flv, webm, m4v, ts Auto-detects installed players (VLC, IINA, system default) VPN & Privacy Interface binding — lock torrent traffic to a specific network interface (e.g. tun0) Auto VPN detection — identifies VPN interfaces (tun, tap, WireGuard, Mullvad, NordLynx, ProtonVPN) Kill switch — automatically pauses all torrents if the VPN interface drops Auto-resume — resumes only the torrents paused by the kill switch when VPN reconnects Proxy support — SOCKS5 and HTTP proxy with optional authentication IP filtering — load P2P blocklists to block unwanted IP ranges Protocol encryption (enabled / forced / disabled) WebUI Remote management — control torrents from any browser at http://localhost:8080 REST API with JSON responses Add torrents via magnet link or .torrent upload Pause, resume, remove torrents remotely View peers and files per torrent Dark theme matching the desktop app HTTP Basic Auth with SHA-256 password hashing Configurable port and remote access (localhost vs 0.0.0.0) Interface 3 themes: Dark, Light, Midnight (bat/vampire aesthetic) Real-time speed graph Detailed panel with tabs: General, Peers, Files, Trackers Filter bar: search by name, filter by state (Active, Downloading, Seeding, Paused, Finished) Drag & drop .torrent files and magnet links Drag & drop reorder in torrent list System tray with notifications (download complete, kill switch events, RSS auto-downloads) Splash screen with bat animation Bilingual: English and Portuguese (BR), auto-detected from system locale Bandwidth Scheduler Alternative speed limits — set different download/upload limits on a schedule Time range — configure active hours (e.g. 01:00 to 07:00), supports overnight ranges Per-day control — choose which days of the week the schedule applies Automatically switches between normal and alternative speeds Media Server Integration Plex — automatically trigger library scan when a download completes Jellyfin / Emby — same automatic library refresh via API Configure server URL and authentication token/key in Settings System Cross-platform: Windows, Linux, macOS Auto-shutdown — automatically shut down PC when all downloads complete (60s cancellable countdown) Auto-update system (AppImage on Linux, installer on Windows, DMG on macOS) CLI arguments: pass .torrent files or magnet: URIs directly Keyboard shortcuts: Space to toggle pause, Ctrl+A to select all, Ctrl+O to open BATorrent 4.1.0 release notes: A community-driven release: everything here came straight from your reports and requests. It closes the remaining gaps with qBittorrent and fixes the Windows settings/tray/splash issues several of you hit. Fixed Settings now actually save. A whole class of preferences — speed limits (and the alternative limits), max active downloads, seed ratio, listen port, max connections, DHT/uTP/encryption, VPN interface, kill switch and proxy — weren't being persisted and reset to defaults on every launch. They now round-trip correctly. (Thanks to everyone who reported "the upload limit always goes back to 0".) Splash and tray toggles stick on Windows. Turning off the startup animation (or "close to tray") no longer reverts — the Windows registry stored these booleans as integers and the UI was misreading them. Close-to-tray hint. The first time the window hides to the tray you get a one-time notification, so the app doesn't look like it vanished (Windows 11 tucks new tray icons into the overflow). macOS Dock icon size. The icon filled its canvas edge-to-edge and rendered larger than neighbouring apps; it now uses the standard safe-area padding. Native file picker language. The "Torrent file / All files" filter in the open dialog follows the app language instead of being hard-coded. Added — qBittorrent parity Alternative speed limits toggle — a turtle button in the toolbar flips your throttled limits on/off instantly, independent of the scheduler. Follow system theme — switch light/dark automatically with the OS (Settings → Appearance). Pre-allocate disk space — reserve the full file size up front to reduce fragmentation (Settings → Downloads). Recheck data on add — optionally force a hash check when adding a torrent, so existing or partial files on disk are detected. Port status indicator — a 🔴 dot in the status bar shows whether your listen port looks reachable (UPnP/NAT-PMP + listen state; fully local, no external check). Add torrent from URL — File → Add torrent from URL (Ctrl+U) fetches a remote .torrent and routes it through the normal add dialog. Export .torrent — right-click a torrent → Export .torrent to save its metadata file. Already there (in case you missed it) Watch folder — auto-add .torrent files dropped into a monitored directory (Settings → Files). This release just surfaces it. Incomplete files already carry a .!bt suffix until they finish. Under the hood Regression tests for the settings-persistence and Windows boolean bugs. A new Qt Quick Test harness covering the startup splash and the design-system widgets. Download: BATorrent 4.1.0 | 37.5 MB (Open Source) Download: BATorrent Portable | 51.7 MB Links: BATorrent Website | Screenshot | Changelog Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Disabling open on hover, great! That was so stupid! They need to do a fix, where if a network share is disconnected, it doesn't hang when opening "This PC" for 20 seconds.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      523
    2. 2
      PsYcHoKiLLa
      170
    3. 3
      +Edouard
      163
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      78
  • Tell a friend

    Love Neowin? Tell a friend!