[URGENT] Server has died...


Recommended Posts

I come into work today with no internet access...

so i head down to the server all is OK... try to remote into the firewall.. it failed..

i hooked a screen up to the firewall only to find a BSOD.. INACCESABLE_BOOT_DEVICE

i tried some standard methods to get it running again but i just cant.

the thing is, this server was here before i came and the previous technician was careless and there are no recovery disks, windows disks to be found..

so i'm left with nothing... i cant boot into dos, or safe mode. i guess i dropped the ball a little because i'm not prepared for this sort of problem.

can anyone offer me any assistance, its sort of an emergency, i have no windows recovery disk.

it's windows server 2000

luckily our main server is fine so we can still access network resources.. but our ISA server seems dead. its an SCSI device

thanks.

Link to comment
https://www.neowin.net/forum/topic/780842-urgent-server-has-died/
Share on other sites

doesit BOSD everytime you try to boot or does it no get past BIOS stadge?

You could use a w2k disc and repair the install..?

Or boot off a Live CD and try to trouble shoot.

If all you have is no internet setup a quick gateway for the users using smoothwall or a proxy on a desktop to get them running then fix the server

...

I suppose you could maybe try a disk recovery utility and copy the contents of the disk to a new hard drive?

Rich

Yep ! You should download a live CD of a linux distro and use the recovery tools included.

doesit BOSD everytime you try to boot or does it no get past BIOS stadge?

You could use a w2k disc and repair the install..?

Or boot off a Live CD and try to trouble shoot.

If all you have is no internet setup a quick gateway for the users using smoothwall or a proxy on a desktop to get them running then fix the server

+1

if you dont like smoothwall, there is always the ipcop for a temp solution until you can recover the server.

btw: this is why backups are not a wast of disk space.

restore from backu.... ohh wait..

What kind of server is this ISA server? What kind of warranty do you have?

Even if you don't have a backup of the entire server you at least have a recent backup of the ISA rules correct?

IF you have absolutely no backups at all then try getting IPCop running on a spare server while you rebuild/repair the ISA Server.

Let this be a lesson that Backups are UBER important. As a sys admin (I am guessing that you are the sys admin at your work) you should ensure not only that backups are done, but also restore said backups occasionally to spare equipment and verify that they are working.

I suppose you could maybe try a disk recovery utility and copy the contents of the disk to a new hard drive?

Rich

can you reccomend a live CD? something like BartPE ?

doesit BOSD everytime you try to boot or does it no get past BIOS stadge?

You could use a w2k disc and repair the install..?

Or boot off a Live CD and try to trouble shoot.

If all you have is no internet setup a quick gateway for the users using smoothwall or a proxy on a desktop to get them running then fix the server

i get to the windows 2000 loading screen, it alst about 5 seconds before it BSODS'

It shouldn't be too hard for you to reconfigure the network to bypass the proxy...

you would think, our network is a nightmare to get your head around.. however, it works so we leave it.. i'll try your suggestion though thanks.

Uh..DOS? Really?

Maybe you should call in someone to look at it.

i tried command prompt from the F8 options but that BSOD's as well... i downloaded some windows 2000 boot disks off bootdisk.com .. i am in the process of running the repair methods on that.

restore from backu.... ohh wait..

What kind of server is this ISA server? What kind of warranty do you have?

Even if you don't have a backup of the entire server you at least have a recent backup of the ISA rules correct?

IF you have absolutely no backups at all then try getting IPCop running on a spare server while you rebuild/repair the ISA Server.

Let this be a lesson that Backups are UBER important. As a sys admin (I am guessing that you are the sys admin at your work) you should ensure not only that backups are done, but also restore said backups occasionally to spare equipment and verify that they are working.

its an old HP thing, it just runs as our firewall and is not used for much else.. but no we dont have our access rules backed up so i cant afford to lose this drive :(

will give IPCop a go. thanks. and yes lesson learned, we do have a backup system it's just so out of date.

buy a router instead.

what

?

It reallys sounds like there is so much more than your backups being out of date. Maybe after this disaster situation your management or whoever is responsible will realize where some extra money needs to go...

Obviously if you are getting any sort of BSOD you are past the BIOS post...some people really should stay out before they cause more harm than good.

Do you have a RAID on this server? If you do, right after BIOS post you should see a BIOS for the RAID controller...does it show the RAID as degraded?

Also, the most obvious question: has anything been done to this server, particularly last night?

It reallys sounds like there is so much more than your backups being out of date. Maybe after this disaster situation your management or whoever is responsible will realize where some extra money needs to go...

Obviously if you are getting any sort of BSOD you are past the BIOS post...some people really should stay out before they cause more harm than good.

Do you have a RAID on this server? If you do, right after BIOS post you should see a BIOS for the RAID controller...does it show the RAID as degraded?

Also, the most obvious question: has anything been done to this server, particularly last night?

How Rude!

buy a router instead.

Uh? Good answer?.... what would a router do? ISA is a firewall for most people only, more then likely they have a router before it if it is coming in through a T1 or other high end business class line... all our networks ISA sits behind a Cisco router before you get to the actual network...

and for not having your filter rules backed up, wow... one of the first things you should do once you got the rules set up is back it up... its just a small XML file you can put on a USB flash drive......

How Rude!

hah The rude comment was directed at whoever even asked if he gets the BSOD everytime and does it pass the BIOS post in the same question.

If it has Raid, it will be very difficult to backup (depending upon which Raid > impossible to backup using a boot cd)

Does it have Raid?

Please explain? You can use any Boot CD or Windows Recovery Console as long as you install the correct RAID driver...As far as what kind of RAID it is, the only type of RAID that would be difficult to recover - I'm assuming you mean recover/repair and not backup - would be a RAID0. God help him if he has a server running on a RAID0.

Here's the explanation

Raid is not the best system to be used when trying to recover data. (not just Raid0)

Anyway... (waiting.)

why isn't it? If the raid hasn't failed and it was just the os that failed, you can use acronis to backup the drive, you can use a pe enviornment to boot up with the proper raid drivers and back up the enviornment, you can use a erd commander disk with the proper raid drivers to try to recover and/or backup the enviornment. I have had to do this before (with acronis).

why isn't it? If the raid hasn't failed and it was just the os that failed, you can use acronis to backup the drive, you can use a pe enviornment to boot up with the proper raid drivers and back up the enviornment, you can use a erd commander disk with the proper raid drivers to try to recover and/or backup the enviornment. I have had to do this before (with acronis).

You are correct. In my experience a RAID is not an obstacle when repairing a system.

If it has Raid, it will be very difficult to backup (depending upon which Raid > impossible to backup using a boot cd)

Does it have Raid?

Here's the explanation

Raid is not the best system to be used when trying to recover data. (not just Raid0)

Anyway... (waiting.)

Speak not of what you don't understand. That's the most ridiculous nonsense I've read in a while.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
    • Indeed. But note that this has Wifi7, HDMI 2.1, BlueTooth 5.4, and 5G Ethernet, so even in the additional features list this bundle blows the Steam Machine away. And, with the money saved, one could improve this dramatically.
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!