Why does Apple limit their hardware?


Recommended Posts

Their 1067MHz(oddly their site says 1066, but my mac says 1067, and CPU-Z reports it as 1061) memory runs at only 1061MHz, the Memory I have is actually even able to run faster then that but the 1067MHz MAY be an ACTUAL hardware limit, I'm not sure.

They also artificially limit the max RAM in many of their machines. there is no reason ALL aluminum 13in Macbooks cant make use of 8GB of memory aside from there being a false limit some place. That seems to only be lifted in the new 13in "pro".

I'm getting annoyed with their false limits, then lifting them to make more money. If I paid for the hardware why cant I make full use of what I payed for?

Link to comment
https://www.neowin.net/forum/topic/788056-why-does-apple-limit-their-hardware/
Share on other sites

You are spending this much time worrying about a 1-6 MHz in difference on your memory speed?

Also, it's not just Apple, if you really want to look into it, you will find all sorts of falsehoods out there.

Don't even get me started on how the 1024 rule makes all of my 1.0 TB hard drives give me only 931 GB in usable storage.

In summary, move on dude, life is short.

Their 1067MHz(oddly their site says 1066, but my mac says 1067, and CPU-Z reports it as 1061) memory runs at only 1061MHz, the Memory I have is actually even able to run faster then that but the 1067MHz MAY be an ACTUAL hardware limit, I'm not sure.

They also artificially limit the max RAM in many of their machines. there is no reason ALL aluminum 13in Macbooks cant make use of 8GB of memory aside from there being a false limit some place. That seems to only be lifted in the new 13in "pro".

I'm getting annoyed with their false limits, then lifting them to make more money. If I paid for the hardware why cant I make full use of what I payed for?

#1, you find variants in any hardware, especially those of that small of an amount

#2, do you have any direct first hand reason to say they "artificially" limit the ram, are you a hardware designer? how do you know the other components of main board or processor dont have "ACTUAL" limits, and wether older hardware is "actually" capable of using more ram or not is looking at only one issue, the battery life if it could use it might have drasticly dropped, would you buy a brand new laptop that only last 6 minutes on a full charge? if you would ive got some land in florida for sale you might be interested in.

#3, again do you have any actual knowledge of that specific hardware even being capable? in any usable manner? you getting annoyed does not do you or anyone anygood, Apple listened to what the customer said and figured out a way to make it better for what they wanted, just because the older hardware is not capable of what current is means NOTHING.

in closing, i dont know what "universe" you are from but it has ALWAYS been this way with Computer components, i did not cry because i had a Pentium II when the Core 2 Duo Quad was released and my Pentium was not capable of doing what the Core 2 could, i dont get your complaining

I know that the original MacBook was cited as being limited to 4GB, but I think more could be installed. I'll try and find the article for you...

Regardless, all companies do it. That's why you have overclocking, etc. There may be other reasons behind it, but it's common, and there are usually ways around it if they are, in fact, artificially limiting their hardware.

The originals can support up to 5 or 6 then have booting issues.

The chipset and other hardware in the MacBook, alone with the OS fully support 8GB and is the same hardware as in the new 13in Pro, the only way the 13 macbook is limited and 13 pro is not would be a limitation placed on the hardware via software/firmware.

#1, you find variants in any hardware, especially those of that small of an amount

#2, do you have any direct first hand reason to say they "artificially" limit the ram, are you a hardware designer? how do you know the other components of main board or processor dont have "ACTUAL" limits, and wether older hardware is "actually" capable of using more ram or not is looking at only one issue, the battery life if it could use it might have drasticly dropped, would you buy a brand new laptop that only last 6 minutes on a full charge? if you would ive got some land in florida for sale you might be interested in.

#3, again do you have any actual knowledge of that specific hardware even being capable? in any usable manner? you getting annoyed does not do you or anyone anygood, Apple listened to what the customer said and figured out a way to make it better for what they wanted, just because the older hardware is not capable of what current is means NOTHING.

in closing, i dont know what "universe" you are from but it has ALWAYS been this way with Computer components, i did not cry because i had a Pentium II when the Core 2 Duo Quad was released and my Pentium was not capable of doing what the Core 2 could, i dont get your complaining

You made a long post for not saying anything, or even knowing what you are talking about. You seem to elude that you know what you are talking about, but fall on your face. Even your comparisons are bad.

1) A few MHz isn't going to make a difference, and as people have stated above, you find this is true even on PC's.

2) There may be motherboard limitations. If you look at Windows laptops, they also limit many things, it's not just Apple.

And to the post above, do you think you know it all? Srsly, it sounds like you need to do more research before you post...

1) A few MHz isn't going to make a difference, and as people have stated above, you find this is true even on PC's.

2) There may be motherboard limitations. If you look at Windows laptops, they also limit many things, it's not just Apple.

And to the post above, do you think you know it all? Srsly, it sounds like you need to do more research before you post...

I have never seen a PC manufacture release a laptop with a false limit then release the IDENTICAL laptop without a limit for a lower price. Also I have not owned any other laptop that had that much of a discrepancy in claimed speed vs actual speed. I do realize that 6MHz is really nothing, but for a company that is claimed to have "such tight tolerances" it's the largest I've seen in memory speeds.

I have 5 other laptops in my house, none of them have more then 3-4MHz difference in their performance vs spec. 2 of them are actually running 1 speed up from spec as HP seems to underrate the speed of the laptops memory vs its capability (calls for 333, but runs at 400(398) just fine).

The originals can support up to 5 or 6 then have booting issues.

The chipset and other hardware in the MacBook, alone with the OS fully support 8GB and is the same hardware as in the new 13in Pro, the only way the 13 macbook is limited and 13 pro is not would be a limitation placed on the hardware via software/firmware.

You made a long post for not saying anything, or even knowing what you are talking about. You seem to elude that you know what you are talking about, but fall on your face. Even your comparisons are bad.

LMFAO I am sorry that was plain funny :)

AltecXP: Learn how hardware work. You can't magically have unlimited ammount/speed of anything. EVERY motherboard have ram limit. Same for chippset. My nvidia 680i can handle more than 8gb at 1066mhz. The bus are not capable of going over than, they would fry (that's physics, the electron flow is not unlimited).

The same pinciple also apply to multicore. CPU can not have unlimited amount of core. Not because they can't build them, but the flow of data is just too big to any current and incoming set of motherboard. Data don't have "magic tube" between your ram and your screen, even with high end DMA mechanism. All those that go through those little green wire you see on your motherboard. Put tho much pressure on them and they will turn in eating elements, just like your oven. It is the exact same thing. Hardware have to be designed to handle a certain ammount of data. You can increase the flow just by soldering 3 or 4 new memory slots on it, you have to do some math and hardware changes. Even the angle of the little green wire need to be calculated once again.

I am not saying that they cant improve the current design, I am just saying that it is right to limit it to what it have been designed for.

AltecXP: Learn how hardware work. You can't magically have unlimited ammount/speed of anything. EVERY motherboard have ram limit. Same for chippset. My nvidia 680i can handle more than 8gb at 1066mhz. The bus are not capable of going over than, they would fry (that's physics, the electron flow is not unlimited).

The same pinciple also apply to multicore. CPU can not have unlimited amount of core. Not because they can't build them, but the flow of data is just too big to any current and incoming set of motherboard. Data don't have "magic tube" between your ram and your screen, even with high end DMA mechanism. All those that go through those little green wire you see on your motherboard. Put tho much pressure on them and they will turn in eating elements, just like your oven. It is the exact same thing. Hardware have to be designed to handle a certain ammount of data. You can increase the flow just by soldering 3 or 4 new memory slots on it, you have to do some math and hardware changes. Even the angle of the little green wire need to be calculated once again.

I am not saying that they cant improve the current design, I am just saying that it is right to limit it to what it have been designed for.

There is no BUS limitation on the 13in MacBook if there was the MacBook would freak out at 6GB, this has been gone over on other Apple sites even by sites that specialize in just apple testing believe it is due to Firmware limitations.

Regarding the RAM, there was this guy who tested it and had to draw the conclusion more than 6 GB will not work in a SR or early 2008 MacBook Pro. The chipset supports it, the machine will be able to see the 8GB of RAM but it won't be able to run stable if it can run at all. This could be due to some bug that may be fixed when going 64 bit (which would require something like Snow Leopard). The guy explained what was happening and what could be the cause of the problems. I did a search on that and found the following links: Testing My Apple MacBook Pro with 8GB of RAM & Pity OS X doesn’t like 8GB of memory in my MacBook Pro & 6GB in MacBook (Pro); Yes it works. - 8GB... well... (macrumors forum).

In case of the first Core 2 Duo MacBooks there was a problem with the chipset addressing memory incorrectly (beyond 3,25 GB's this chipset would address already addressed memory again) leading to a lot of problems. This caused a lot of companies to limit the maximum amount of RAM to 3 GB. Limiting the amount of RAM is not necessarily a wrong thing to do, in this case it is the most sensible thing to do when waiting on a new chipset without this bug. OCZ also did some limiting on their Vertex SSD's after Anandtech told them what they needed to change. Eventually it actually made the SSD usable without any hickups. So yes, putting a limit on something is not always a bad thing, it is mostly done to make the device a lot more stable and usable.

Also if you see small differences as 1067, 1066 or 1061 this will most likely be caused by some sort of error in measuring the amount of MHz (the accuracy of measuring it, wrong way of measuring it, etc.) or a different way of calculating things. As long as you don't know how it is measured you shouldn't be drawing any conclusions, especially not one in which you place the blame on someone.

Edited by dyn
Their 1067MHz(oddly their site says 1066, but my mac says 1067, and CPU-Z reports it as 1061) memory runs at only 1061MHz, the Memory I have is actually even able to run faster then that but the 1067MHz MAY be an ACTUAL hardware limit, I'm not sure.

They also artificially limit the max RAM in many of their machines. there is no reason ALL aluminum 13in Macbooks cant make use of 8GB of memory aside from there being a false limit some place. That seems to only be lifted in the new 13in "pro".

I'm getting annoyed with their false limits, then lifting them to make more money. If I paid for the hardware why cant I make full use of what I payed for?

Hi,

Personally I don't see the limitations as much of an annoyance. I have an iMac and MacBook; my MacBook will soon be upgraded to 4GB soon. I guess it depends on what you're doing with your machine.

I'm sure there are reason for why they do limit it - it might have to do with compatibility, iffy reliability on third party memory, their boards and certain sizes. I know for example that my MacBook is particularly fussy as I expected the DDR2 800Mhz ram I purchased to slow down to the 667Mhz (like in the old days when one could get 133Mhz SDRAM, and it would slow down if the max speed your computer had was 100Mhz).

For me, the reduced memory consumption of 10.6, coupled with the optimisation and the current limits, I don't think things are as bad as you claim.

Limiting the amount of RAM is not necessarily a wrong thing to do, in this case it is the most sensible thing to do when waiting on a new chipset without this bug. OCZ also did some limiting on their Vertex SSD's after Anandtech told them what they needed to change. Eventually it actually made the SSD usable without any hickups. So yes, putting a limit on something is not always a bad thing, it is mostly done to make the device a lot more stable and usable.

Also if you see small differences as 1067, 1066 or 1061 this will most likely be caused by some sort of error in measuring the amount of MHz (the accuracy of measuring it, wrong way of measuring it, etc.) or a different way of calculating things. As long as you don't know how it is measured you shouldn't be drawing any conclusions, especially not one in which you place the blame on someone.

+1

Great post dyn

I'm getting annoyed with their false limits, then lifting them to make more money. If I paid for the hardware why cant I make full use of what I payed for?

When you bought it it said 4GB Max, it does 4GB Max. You got what you bought, what's your problem?

i might be missing the point but the limits are and will always be in place due to either design/engineering or manufacturing/marketing of the product ...

same thing can be said about windows ... all windows is the same but then you have pro being "better" than home, or osx server getting additional things than home .... so ... all in all is just a tweak (so to speak)...

hardware will always oscillate (given some .1% (or less i am not familiar with tolerances) discrepancy in all its components ..... but as to being able to put more ram in the same board is not really an argument because you can theoretically put as much ram as your brain can handle in a mobo but it will only use the amount it is designed/programmed for ... sure there will be updates and tweaks but that is just how things go ...

I'm getting annoyed with their false limits, then lifting them to make more money. If I paid for the hardware why cant I make full use of what I payed for?

ATI does it, Intel does it, AMD does and nVidia does it - almost every hardware company artificially cripples their hardware - not even mentioning software companies like Microsoft who artificially cripple their software.

What's the difference?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Anthropic pulls Fable 5 and Mythos 5 after US export control order by Pradeep Viswanathan In April this year, Anthropic launched the Claude Mythos Preview frontier model with state-of-the-art cyber and coding capabilities for a select set of companies around the world. After preparing appropriate guardrails, early this week, Anthropic launched Claude Fable 5 and Mythos 5, its most capable AI models. Claude Fable 5 is for general users and comes with strict safeguards, while Mythos 5 is designed with fewer safeguards for cybersecurity and biology use cases. Today, Anthropic abruptly suspended access to its Fable 5 and Mythos 5 AI models for all customers after receiving an export control directive from the US government. The company received the directive from the government today at 5:21 p.m. ET, and the received letter did not provide any details regarding the national security concern. Anthropic understands that the government became aware of a method to bypass, or “jailbreak,” Fable 5, which might be the reason behind the directive. The order was issued under national security authorities and requires the company to suspend all access to Fable 5 and Mythos 5 by any foreign national, whether they are inside or outside the United States. The restriction also applies to foreign national employees working at Anthropic. As a result, the company has disabled both models for all customers to ensure compliance. Access to previous Anthropic models like Opus and Sonnet is not affected by this government order. The company highlighted that it had developed strong safeguards to reduce the possibility that Fable is misused for tasks related to cybersecurity. In fact, many developers are complaining that the safeguards are going overboard. Additionally, the company worked with the US government, the UK AISI, multiple private third-party organizations, and internal teams to red-team Fable’s safeguards for thousands of hours. Finally, Anthropic noted that no testers have yet been able to find a universal jailbreak on Fable 5. As expected, Anthropic disagrees that a narrow potential jailbreak should lead to the recall of a commercial model used by hundreds of millions of people. It warned that applying this standard across the AI industry could effectively halt new frontier model deployments. Anthropic concluded by mentioning that it is working to restore access to Fable 5 and Mythos 5 as soon as possible and plans to share more details within the next 24 hours.
    • Brave Browser 1.91.172 is out.
    • Any Video Converter Free 9.2.3 by Razvan Serea Any Video Converter is an All-in-One video converting tool with an easy-to-use graphical interface, fast converting speed and excellent video quality. Any Video Converter supports all popular video formats and converts your videos to different video formats including MP4, MOV, MKV, M2TS, M4V, MPEG, AVI, WMV, ASF, OGV, WEBM, and more. It supports converting videos to customized percent (50%, 100%, 200%, and more) or resolution (480p, 720p, 1080p, 4K, and more); It supports encoding videos into x264, x265, h263p, xvid, mpeg, wmv, and more. Any Video Converter Free key features: Compatible with Windows 11/10/8.1/8/7 (32-64bit) User interface are available in 14 languages Convert all kinds of video formats including high-definition videos Extract audio from any videos and save as MP3/WMA for your mp3 player Take snapshot from any videos and build your own picture collection Support high-definition for both input and output Batch add videos from hard drive and batch convert Customize output parameters completely as you like Manage your output videos files by group or output profile Merge several video files into a single and long one Clip a video into segments Free Audio Filter: Adjust audio volume and add audio effects Crop frame size to remove black bars and retain what you want only Adjust the brightness, contrast, saturation Rotate or flip or add noise/sharpen effects Produce output video with subtitles of your own dialogue and much, much more... Any Video Converter Free 9.2.3 changelog: Fixed video download engine auto-update failures. Added custom speed control support in the speed change tool. Added support for downloading YouTube AI-generated subtitles. Added support for preserving original audio stream in the format convert tool (e.g., Dolby Atmos, DTS:X). Fixed other bugs and improved overall performance. Download: Any Video Converter Free 9.2.3 | 7.6 MB (Freeware) View: Any Video Converter Free Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Not sure what country you’re in but in many countries you can absolutely jail the sellers behind businesses… in fact I’d say in most countries you can do that
    • I guess we are done since you refuse to read my comment you replied to or my other comment in another thread you were also a part of here.
  • Recent Achievements

    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
    • Rookie
      Rimplesnort went up a rank
      Rookie
    • One Year In
      Markus94287 earned a badge
      One Year In
    • One Month Later
      Markus94287 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      176
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      ATLien_0
      92
    5. 5
      Steven P.
      79
  • Tell a friend

    Love Neowin? Tell a friend!