Recommended Posts

Here's my main headquarters you could call it lol. I've got more computers in the closet, mainly servers and all. I'll get rid of the old keyboard/mouse as soon as I get another ethernet cable to go to the linux computer.

http://bryceeason.net/pics/100_0688.JPG

http://bryceeason.net/pics/100_0689.JPG

http://bryceeason.net/pics/100_0690.JPG

http://bryceeason.net/pics/100_0691.JPG

http://bryceeason.net/pics/100_0692.JPG

http://bryceeason.net/pics/100_0693.JPG

http://bryceeason.net/pics/100_0694.JPG

That's my daily use setup. I have another 24 port switch and all in the closet. I'm in the process of cleaning em all out so if I get time I'll be sure to post a picture of them.

Edited by Velox
Elbow grease!

You're going to o_0 when you see the new PSU installed now though below lol

I got an OCZ ModXtreme 600watt and also a Zalman Fanmate2 for the intake fan as on my mobo only one fan header (other than the CPU) can be voltage controlled from the OS and I wanted my 3rd fan slowed down to be less audible (I have super ears hah!).

Anyway, All fans are now running 700-900rpm and are uber silent, before I could hear the front fan's ambient hum but now not so. A baby could sleep with the PC on. Definitely.

Wow, that is a really nice case. Just one question, does it support TRUE 120 or is it too small?

I have the 120 you speak of and it's perfect fitting :)

unlike many other cases Lian Li cases tops can also be removed for even easier fitting.

Yeah i noticed you had one that looked similar, I think mine has a couple more heatpipes that's why I asked. :)

I am looking for a decent case to replace my Stacker 832 as the build quality is a bit off and it's starting to fall apart a bit. Dust prevention was also high on my list so I'm glad I looked in this thread, are the filters easy to change and can spares be bought easily? Side fitting drives are a plus for me as I hate having to remove stuff to change a hard drive. That's pretty neat the top can be removed.

Haha nice!

In a bid to keep the front of mine as flush and minimal as possible I have ditched my internal DVD writer and will pick up an external Samsung slim USB powered DVD drive that will sit next to the mybook hdd on my desk and look nice.

Now my case will be almost complete!

Here's my main headquarters you could call it lol. I've got more computers in the closet, mainly servers and all. I'll get rid of the old keyboard/mouse as soon as I get another ethernet cable to go to the linux computer.

http://bryceeason.net/pics/100_0688.JPG

http://bryceeason.net/pics/100_0689.JPG

http://bryceeason.net/pics/100_0690.JPG

http://bryceeason.net/pics/100_0691.JPG

http://bryceeason.net/pics/100_0692.JPG

http://bryceeason.net/pics/100_0693.JPG

http://bryceeason.net/pics/100_0694.JPG

That's my daily use setup. I have another 24 port switch and all in the closet. I'm in the process of cleaning em all out so if I get time I'll be sure to post a picture of them.

Not that its any of my business, but I'm just curious. Break it down as to what you use each computer for.

Not that its any of my business, but I'm just curious. Break it down as to what you use each computer for.

iMac - connected to the 22" display - video editing for work.

eMac - used to record news stations for editing, etc for work.

Laptop - just an IRC client, 32 bit system if I need one.

Main PC - one on the desk open - Main rig, does everything I wanna do on it lol. Mainly gaming.

Linux PC - just a play around machine really lol.

Blusih HP PC - Untangle server. Hooked directly into the back of the bottom linksys router.

Greyish HP PC - Just sitting there, haven't found a use for a 733mhz computer yet again.

PC laying on it's side under the left desk - Just need a hard drive for it and a long enough ethernet cable.

Compaq Server - web, ftp, sql, etc

iMac - connected to the 22" display - video editing for work.

eMac - used to record news stations for editing, etc for work.

Laptop - just an IRC client, 32 bit system if I need one.

Main PC - one on the desk open - Main rig, does everything I wanna do on it lol. Mainly gaming.

Linux PC - just a play around machine really lol.

Blusih HP PC - Untangle server. Hooked directly into the back of the bottom linksys router.

Greyish HP PC - Just sitting there, haven't found a use for a 733mhz computer yet again.

PC laying on it's side under the left desk - Just need a hard drive for it and a long enough ethernet cable.

Compaq Server - web, ftp, sql, etc

You not got one for email?

You not got one for email?

Thanks for reminding me. I'll turn that linux box into a dedicated email client. And add a email server to the server =).

The greyish HP computer will become a dedicated web server.

The bluish HP computer will become a dedicated sql server.

The pc on it's side will become a dedicated email server.

The compaq server will stay a ftp server.

Why though? Is there a law somewhere saying I can't have this many computers or more? I'm constantly putting computers together from parts I get and always buying new stuff, so why not have each do something seperate.

Well your room would be cooler, your power bill would be lower and you'd have more space :yes:

My server sitting next to me on the floor, a Dell P4 2.0 with 1 gig of ram is my

Voice Mail server

Web Server

Hamachi Server

Surveillance recording system.

and my Proxy server

Poor little computer :laugh:

Well your room would be cooler, your power bill would be lower and you'd have more space :yes:

My server sitting next to me on the floor, a Dell P4 2.0 with 1 gig of ram is my

Voice Mail server

Web Server

Hamachi Server

Surveillance recording system.

and my Proxy server

Poor little computer :laugh:

My room is over a 2 car garage, it's plenty big enough for me and my setup. I've got 3 30" fans going full blast all the time as well.

Hmm, Voice mail Server, I must have one of those. What software do you use for your voice mail service?

I am looking at going all rack mounted soon though. I already have 3 19" rack cases ready to be installed and setup. Just need to get some time to do it =). And finally put that server cabinet of mine to use lol.

My room is over a 2 car garage, it's plenty big enough for me and my setup. I've got 3 30" fans going full blast all the time as well.

Hmm, Voice mail Server, I must have one of those. What software do you use for your voice mail service?

I am looking at going all rack mounted soon though. I already have 3 19" rack cases ready to be installed and setup. Just need to get some time to do it =). And finally put that server cabinet of mine to use lol.

The voice mail server I use is this http://www.ezvoice.ezsofttek.com/pages/download.htm

Here is the review I wrote about it way back when

https://www.neowin.net/forum/index.php?showtopic=579161

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
    • Normally, I admit when a title is clickbait (unfortunately, it's become somewhat necessary to compete against AI-dominated news sections today), but in this case, all supported versions is implied and doesn't need to be spelled out in the title. Of course, I'm covering a Patch Tuesday update bug that is only available to supported Windows SKUs. All our coverage relates to supported Windows software and SKUs only unless we expressly state that it's "unsupported", "unofficial", or "third-party". I'm sorry, but supported/official SKUs don't need to be spelled out as such in every Neowin headline.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      593
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      77
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!